THERMAL SCIENCE

International Scientific Journal

Thermal Science Archive [volume 25, year 2021, Issue 6]

ISSUE 6A: Selection of papers devoted to PROBLEMS IN ENGINEERING THERMOPHYSICS AND FLUID DYNAMICS and to PHYSICAL AND CHEMICAL PROCESSES IN GAS DYNAMICS, NANOFLUIDS, COMBUSTION, COAL, RENEWABLE ENERGIES, AND REFUSE DERIVED FUELS
ISSUE 6B: HEAT AND FLUID-FLOW MODELS WITH APPLICATIONS and THERMAL PROCESSES UNDER REAL OPERATING CONDITIONS, ENERGY EFFICIENCY AND STORAGE, AND RENEWABLE ENERGY USE

Issue 6A

Part I

Papers devoted to problems in engineering thermophysics and fluid dynamics
Guest Editor
Prof. Juan Luis Garcia Guirao, Department of Applied Mathematics and Statistics, Technical University of Cartagena, Hospital de Marina, Cartagena, Spain
Energy saving technology of wall insulation of harbor building based on energy cost analysis
Gravity measurement method of solid rocket drive based on switched reluctance motor system
Structure and toughening mechanical properties of multi principal component high entropy alloy
Coherent synthesis of ultrashort pulse fiber laser based on balanced difference method
Numerical simulation method of marine oil-water separation
Sliding control method of marine ecological protection robot
Design of performance evaluation model for warm mix recycled asphalt pavement based on fuzzy decision algorithm
Numerical simulation of heat dissipation of surface mounted permanent magnet synchronous hub motor
Thermal coupling effect analysis of geotechnical engineering reinforcement materials based on finite element analysis
Real time numerical simulation of thermal conductivity of marine gas turbine lubricating oil under complex sea conditions
State variable-fuzzy prediction control strategy for superheated steam temperature of thermal power units
Parameter optimization of anti crystallization flocking drainage pipe based on flow field distribution characteristics
Control method of mechanical smoke emission in high-rise building corridor
Power take-off damping control performance on the power conversion of oscillating-buoy wave energy converter
Increase of constant weight rates of weighing bottles and evaporating dishes in a pharmacological experiment
Parameter optimization of anti-crystallization flocking drainage pipe based on macro force and displacement characteristics of villus
Plastic deformation technology of high strength deformed magnesium alloy
Analysis of micro-motion of nanofluid particles based on machine vision
Comprehensive correction method of airtight coring saturation based on core classification
Effects of high salinity wastewater on the properties of coal gasification residue-based cementitious material
Dynamic numerical study on phase change thermal storage heat transfer
Theoretical calculation and simulation of surface-modified scalable silicon heat sink for electronics cooling
"Near wall" combustion model of spark ignition engine
Effects of five different parameters on biodiesel HCCI combustion in free-piston engine generator
Design approach for subsea data center based on thermodynamic theory under the premise of building energy conservation
Velocity difference changes between fluid and sand particles in boundary-layer and very near wake area
Thermal comfort models of venue in hot and humid subtropical regions
Mechanical transmission system of loader based on hydraulic hybrid technology

Part II

Papers devoted to physical and chemical processes in gas dynamics, nanofluids, combustion, coal, renewable energies and refuse derived fuels
Magnetohydrodinamic dusty hybrid nanofluid peristaltic flow in curved channels
Determination of cop maximum of cold water loop of heat pump heating system by means of numerical-graphical optimization procedure
Investigation of decarbonization potential in green building design to accelerate the utilization of renewable energy sources
Melting process modeling of Carreau non-Newtonian phase change material in dual porous vertical concentric cylinders
Analysis of thermal and gas-dynamic characteristics of different types of propellant in small weapons
Interaction times of homogeneous and heterogeneous droplets in gases
Influence of turbulence on the efficiency and reliability of combustion chamber of the gas turbine
Study of the possibilities of integrated treatment of flue gases and waste water from coal-fired heat power plants
Buckling and postbuckling behavior of shell type structures under thermo mechanical loads
Evaluation of heating efficiency and thermal comfort in special purpose vehicle cabins
Correlation model for fiber diameter of the electro-spun membrane using KGM (1,N) model for nanofiltration
Heat enhancement analysis in a differentially heated inclined square enclosure with water and ethylene glycol based Al2O3 nanofluid
Thermal analysis of different Refuse Derived Fuels samples

Issue 6B

Part I

Heat and Fluid-Flow Models with Applications
Guest Editor
Prof. Xiao-Jun Yang, State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou, Jiangsu, China
Variation law of water level in water injection drill under the influence of mining in Datong mining area
The non-Darcy characteristics of fault water inrush in karst tunnel based on flow state conversion theory
Numerical simulation for fracture network evolution in coal-bearing gas reservoir reconstruction based on damage theory
On (2+1)-dimensional expanding integrable model of the Davey-Stewartson hierarchy
Experimental study on high temperature mechanical properties of aluminate cement mortar mixed with fiber
Analytical solution to local fractional Landau-Ginzburg-Higgs equation on fractal media
Study on mechanical properties of granite minerals based on nanoindentation test technology
The y function applied in the study of an anomalous diffusion
Flow characteristics of fractal fracture with different fractal dimension and different fracture width
Wind tunnel test of an anti-icing approach by heat pipe for wind turbine bladesunder the rime ice condition
Direct tensile mechanical properties and acoustice mission characteristics of coal at different depths of Pingdingshan mining area
A new viewpoint on theory of the scaling-law heat conduction process
Study on the evolution law of physical properties of soft coal seams under different water immersion time
A novel triaxial apparatus to evaluate the effect of high temperature nitrogen injection concept and design
An experimental study on the damage and acoustic emission character of raw coalunder uniaxial compression condition
Numerical simulation considering the effect of uneven frost heave on tunnel structure in cold regions
Operation mode and heat performance of energy drilled piles
A new insight to the scaling-law fluid associated with the Mandelbrot scaling law
A new RLC series-resonant circuit modeled by local fractional derivative
New insights on the J and Y functions in the heat transfer
Mechanical properties and acoustic emission characteristics of granite under thermo-hydro-mechanical coupling
Study on temperature field of entrance section at high altitude tunnel considering water supply from snowmelt
A simple method to calibrate the temperature effect for the calculation of gas permeability
Defect detection of GFRP/Nomex honeycomb sandwich structure by linear frequency modulation infrared thermal imaging
Coupling characteristics of meso-structure and thermophysical parameters of deep granite under high geo-temperature
The series representations for the J and H functions applied in the heat-diffusion equation
Numerical simulation of icing effect on aerodynamic characteristics of a wind turbine blade
Experimental investigations of CO2 seepage behaviorin naturally fractured coal under hydro-thermal-mechanical conditions
Characteristics and optimization of SCO2 Brayton cycle system for high power sodium-cooled fast reactor on Mars

Part II

THERMAL PROCESSES UNDER REAL OPERATING CONDITIONS, ENERGY EFFICIENCY AND STORAGE, AND RENEWABLE ENERGY USE
Computational modeling of flow field in boiler before and after urea injection under different conditions
Numerical investigation of using different arrangement of fin slides on the plate-fin heat sink performance
Influence of particle size and density of pelleted samples of forest fuel on thermokinetic characteristics of pyrolysis and oxidation
Simulation and optimization of liquefied natural gas cold energy power generation system on floating storage and regasification unit
Cost based optimization of industrial bulk compresed natural gas filling facility operations
Preparation and characterization of phase change energy storage gypsum
Performance evaluation of a walking beam type reheating furnace based on energy and exergy analysis
A new cognition on oscillatory thermocapillary convection for high Prandtl number fluids
Heat conduction in rectangular solids with internal heat generation
Numerical simulation of the CO2 diffusion effect on low turbulent mixed convection in a ventilated room heated by the bottom
Utilization of soybean dregs for solid fuel production through hydrothermal carbonization
Heat transfer performance and influences of spray cooling under quenching
On the mountain-river-desert relation

Open Forum

Open Forum Papers
Comment on: “A critical review on heat and mass transfer modelling of viral infection and virion evolution: The case of SARS-COV2"

Corrigendum

Corrigendum: Simplified logistics model and its application in process simulation