Thermal Science

International Scientific Journal

[ keyword: modeling ]

Papers published in THERMAL SCIENCE also containing keyword modeling

Modeling of pulverized coal combustion stabilization by means of plasma torches

THERMAL SCIENCE, volume 9, Issue 2, YEAR 2005

all keywords related to this paper

modeling, pulverized coal, combustion stabilization, plasma, optimization

IN-SITU LASER SPECTROSCOPY OF CO, CH4, AND H2O IN A PARTICLE LADEN LABORATORY-SCALE FLUIDIZED BED COMBUSTOR

THERMAL SCIENCE, volume 6, Issue 2, YEAR 2002

all keywords related to this paper

coal, biomass, pyrolysis, in situ laser spectroscopy, tunable diode laser, concentration measurements, carbon monoxide, methane, water, combustion, devolatilization, modeling

Mathematical modeling of a multi-stream brazed aluminum plate fin heat exchanger

THERMAL SCIENCE, volume 14, Issue 1, YEAR 2010

all keywords related to this paper

fouling, heat exchanger, modeling, simulation

In-grid solar-to-electrical energy conversion system modeling and testing

THERMAL SCIENCE, volume 16, Supplement 1, YEAR 2012

all keywords related to this paper

in-grid photovoltaic systems, modeling, equivalent cell circuit diagram, inverter topology, real time simulation

Ecological modeling of pollutants in accidental fire at the landfill waste

THERMAL SCIENCE, volume 17, Issue 3, YEAR 2013

all keywords related to this paper

fire, pollutants, waste, modeling

Performance improvement of double-tube gas cooler in CO2 refrigeration system using nanofluids

THERMAL SCIENCE, volume 19, Issue 1, YEAR 2015

all keywords related to this paper

transcritical CO2 cycle, double tube gas cooler, nanofluids, heat transfer, modeling, performance

A mathematical model and simulation of the drying process of thin layers of potatoes in a conveyor-belt dryer

THERMAL SCIENCE, volume 19, Issue 3, YEAR 2015

all keywords related to this paper

potatoes, drying, thin layer, conveyor-belt dryer, modeling, automatic control

Parametric analysis of a solar still with inverted V-shaped glass condenser

THERMAL SCIENCE, volume 19, Supplement 2, YEAR 2015

all keywords related to this paper

solar distillation, modeling, condensers differences, sensitivity to orientation

Evaluation of global solar radiation using multiple weather parameters as predictors for South Africa provinces

THERMAL SCIENCE, volume 19, Supplement 2, YEAR 2015

all keywords related to this paper

modeling, solar radiation, South Africa, multiple predictors, weather parameters

Modeling the cooling performance of vortex tube using a genetic algorithm-based artificial neural network

THERMAL SCIENCE, volume 20, Issue 1, YEAR 2016

all keywords related to this paper

vortex tube, modeling, neural network, genetic algorithm, cooling performance

Modeling and optimization of processes for clean and efficient pulverized coal combustion in utility boilers

THERMAL SCIENCE, volume 20, Supplement 1, YEAR 2016

all keywords related to this paper

modeling, pulverized coal combustion, furnace, NOx emission reduction, utility boiler efficiency

Energy efficiency cart modeling of solar energy collectors by genetic programming

THERMAL SCIENCE, volume 20, Supplement 2, YEAR 2016

all keywords related to this paper

energy efficiency, solar energy, collectors, modeling

Waste heat recovery at the glass industry with the intervention of batch and cullet preheating

THERMAL SCIENCE, volume 20, Issue 4, YEAR 2016

all keywords related to this paper

energy efficiency, waste heat recovery, batch preheating, modeling, glass industry, CO2 emissions

Modeling of biofuel pellets torrefaction in a realistic geometry

THERMAL SCIENCE, volume 20, Issue 4, YEAR 2016

all keywords related to this paper

torrefaction, biomass, pellet, heat and mass transfer, kinetics, modeling

Modeling of pulverized coal combustion for in-furnace NOx reduction and flame control

THERMAL SCIENCE, volume 21, Supplement 3, YEAR 2017

all keywords related to this paper

modeling, turbulent two-phase reactive flow, tangential firing of pulverized coal, combustion modifications, NOx and flame control

A fractional model for time-variant non-Newtonian flow

THERMAL SCIENCE, volume 21, Issue 1, YEAR 2017

all keywords related to this paper

fractional calculus, time-dependent, thixotropic, anti-thixotropic, modeling, non-Newtonian flow

MODELING OF CUTTING TEMPERATURE IN THE BIOMEDICAL STAINLESS STEEL TURNING PROCESS

THERMAL SCIENCE, volume 20, Supplement 5, YEAR 2016

all keywords related to this paper

cutting temperature, Artificial Neural Network, modeling, turning, biomedical stainless steel

Two-dimensional mathematical model for simulation of the drying process of thick layers of natural materials in a conveyor-belt dryer

THERMAL SCIENCE, volume 21, Issue 3, YEAR 2017

all keywords related to this paper

drying, thick layer, conveyor-belt dryer, modeling, automatic control, simulation

Development of mathematical model for co-firing pulverized coal and biomass in experimental furnace

THERMAL SCIENCE, volume 22, Issue 1, YEAR 2018

all keywords related to this paper

modeling, validation, co-firing, swirl burner, pulverized coal, biomass, experimental furnace, devolatilization, tar, soot

MODELING OF A SOLAR PHOTOVOLTAIC WATER PUMPING SYSTEM UNDER THE INFLUENCE OF PANEL COOLING

THERMAL SCIENCE, volume 21, Supplement 2, YEAR 2017

all keywords related to this paper

photovoltaic assisted water pumping systems, air cooling, modeling

Modeling of overall heat transfer coefficient of a concentric double pipe heat exchanger with limited experimental data by using curve fitting and ANN combination

THERMAL SCIENCE, volume 23, Issue 6, YEAR 2019

all keywords related to this paper

modeling, overall heat transfer coefficient, curve fitting, Artificial Neural Network

Thermal modeling of a linear induction motor used to drive a power supply system for an electric locomotive

THERMAL SCIENCE, volume 23, Issue 2, YEAR 2019

all keywords related to this paper

linear induction motor, thermal regime, modeling, simulations, experimental validation

Analysis and modeling of the effects of process parameters on specific cutting energy in abrasive water jet cutting

THERMAL SCIENCE, volume 22, Supplement 5, YEAR 2018

all keywords related to this paper

specific cutting energy, abrasive water jet cutting, modeling, artificial neural networks, aluminum alloy

New model for compressive strength loss of lightweight concrete exposed to elevated temperatures

THERMAL SCIENCE, volume 23, Supplement 1, YEAR 2019

all keywords related to this paper

Lightweight concrete, high temperature, compressive strength, symbolic regression, modeling

Evaluating long-term strength of structures

THERMAL SCIENCE, volume 23, Supplement 2, YEAR 2019

all keywords related to this paper

creep, long-term strength, modeling, defining relations, temperature, durability, service life

Modeling and optimization of temperature in end milling operations

THERMAL SCIENCE, volume 23, Issue 6, YEAR 2019

all keywords related to this paper

temperature, end milling, modeling, optimization

Modeling of intermittent convective drying of walnuts in single layer and its influence on deep bed drying simulation

THERMAL SCIENCE, volume 23, Issue 6, YEAR 2019

all keywords related to this paper

intermittent drying, Walnuts, modeling, heat and mass transfer

Parametric study of non-evaporative spray cooling on aluminum plate: Simulation and analysis

THERMAL SCIENCE, volume 23, Supplement 4, YEAR 2019

all keywords related to this paper

nozzle, Dispersion, impinging flow, modeling, simulation, heat dissipation

Review of the investigations of pulverized coal combustion processes in large power plants in laboratory for thermal engineering and energy: Part A

THERMAL SCIENCE, volume 23, Supplement 5, YEAR 2019

all keywords related to this paper

coal, pulverized coal, combustion, boiler, furnace, burner, slagging, modeling, technologies

Experimental validation of wind energy estimation

THERMAL SCIENCE, volume 24, Issue 6, YEAR 2020

all keywords related to this paper

wind turbine, modeling, CFD, combined methodology, measurement

Optimal design of nozzle for filter bag cleaning device of combined air-conditioning based on fluid mechanics

THERMAL SCIENCE, volume 24, Issue 3, YEAR 2020

all keywords related to this paper

fluid mechanics, cleaning device, filter bag, nozzle, ANSYS, flow field, modeling, simulation, parameter

Design of thermal power plant modernization and rehabilitation model for the new market demands and challenges

THERMAL SCIENCE, volume 25, Issue 4, YEAR 2021

all keywords related to this paper

Clausius Rankine process, solar central receiver system, modeling, analysis, Matlab Simulink software environment

Thermal dynamics and thermal management strategy for a civil aircraft hydraulic system

THERMAL SCIENCE, volume 24, Issue 4, YEAR 2020

all keywords related to this paper

civil aircraft hydraulic system, thermal dynamics, modeling, temperature-rise, thermal management

Heat and mass transfer performance and exergy performance evaluation of seawater cooling tower considering different inlet parameters

THERMAL SCIENCE, volume 26, Issue 5, YEAR 2022

all keywords related to this paper

Seawater cooling tower, heat and mass transfer, exergy analysis, performance evaluation, modeling

Temperature effect on thermal-hydraulic performance of one-pass counter-current flow shell-and-tube heat exchanger and upon its design

THERMAL SCIENCE, volume 26, Issue 5, YEAR 2022

all keywords related to this paper

heat transfer, single pass 1-1, CCFSTHE, thermal design, modeling, effectiveness, MKA method

Numerical analysis of injection parameters influence on diesel engine performances and emissions correlated by maximum in-cylinder pressure

THERMAL SCIENCE, volume 27, Issue 2, YEAR 2023

all keywords related to this paper

modeling, correlations, kiva3v2, CO, NOx, In-cylinder pressure, Injection parameters, Injection delay, Combustion duration