THERMAL SCIENCE

International Scientific Journal

Dušan Lj Petković

,

Miloš J. Madić

,

Miroslav R. Radovanović

,

Predrag Lj Janković

,

Goran M. Radenković

MODELING OF CUTTING TEMPERATURE IN THE BIOMEDICAL STAINLESS STEEL TURNING PROCESS

ABSTRACT
Stainless steel is widely used as material in many industries and medicine. As biomedical material, it has been used for making devices, implants as well as tools and equipment in surgery and dentistry. The most of them is processed by turning. Modeling of temperature in the metal cutting process is very important step in understanding and analysis of the metal cutting process. The objective of this study is to develop an artificial neural network model which can be used success-fully for accurate prediction of cutting temperature while performing turning of the biomedical stainless steel. Before the modeling, cutting temperature was measured, as one of the significant parameters in turning process, by using the infrared thermal imaging camera. Finally, based on the mathematical model, the effects of the turning parameters on the cutting temperature were examined.
KEYWORDS
cutting temperature, Artificial Neural Network, modeling, turning, biomedical stainless steel
PAPER SUBMITTED: 2016-02-23
PAPER REVISED: 2016-05-07
PAPER ACCEPTED: 2016-05-12
PUBLISHED ONLINE: 2016-12-25
DOI REFERENCE: https://doi.org/10.2298/TSCI16S5345P
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2016, VOLUME 20, ISSUE Supplement 5, PAGES [S1345 - S1354]
REFERENCES
  1. Petković, D., et al., Coating: a Way to Improve Biomedical Properties of AISI 316L Stainless Steel, Proceedings, 35th International Conference on Production Engineering ICPE 2013, Kopaonik, Serbia, 2013, pp. 167-174
  2. Cieslik, M., et al., Metal Release and Formation of Surface Precipitate at SS Grade 316 and Hanks Solu-tion Interface - Inflammatory Response and Surface Finishing Effects, Corrosion Science, 51 (2009), 5, pp. 1157-1162
  3. Radovanović, M, et al., Optimization of Turning Parameters of Medical Stainless Steel Based on Cutting Force Using Taguchi Method, Proceedings, International Scientific Conference - UNITECH 2014, Gabrovo, Bulgaria, 2014, Vol. III, pp. 304-309
  4. Pal, P., Gautam, D., Experimental Analysis of Cutting Forces and Temperature in Orthogonal Machining of AISI 1045 Steel, International Journal of Emerging Technology and Advanced Engineering, 5 (2015), 1, pp. 451-457
  5. Tanikić, D., Despotović, V., Artificial Intelligence Techniques for Modelling of Temperature in the Metal Cutting Process, in: Metallurgy - Advances in Materials and Processes (ed. Y. Pardhi), InTech, Rijeka, Croatia, 2012, pp. 153-176
  6. Abhang, L. B., Hameedullah, M., Chip-Tool Interface Temperature Prediction Model for Turning Pro-cess, International Journal of Engineering Science and Technology, 2 (2010), 4, pp. 382-393
  7. Muller-Hummed, P., Lahr's, M., A New Instrument to Optimize Cutting Process, in situ Temperature Measurement on Diamond Coated Tools, Innovations in Material Research, 1 (1996), 1, pp. 1-9
  8. Tanikić, D., et al., Modelling Metal Cutting Parameters Using Intelligent Techniques, Strojniški vestnik - Journal of Mechanical Engineering, 56 (2010), 1, pp. 52-62
  9. Nedić, B. P., Erić, M. D., Cutting Temperature Measurement and Material Machinability, Thermal Sci-ence, 18 (2014) Suppl. 1, pp. S259-S268
  10. Abhang, L. B., Hameedullah, M., The Measurement of Chip-Tool Interface Temperature in the Turning of Steel, International Journal of Computer Communication and Information System, 12 (2010), 1, pp. 1-5
  11. Kwon, P., et al., An Inverse Scheme to Measure Steady-State Tool-Chip Interface Temperatures Using an Infrared Camera, International Journal of Machine Tools & Manufacture, 41 (2001), 7, pp. 1015-1030
  12. Radovanović, M, et al., Application of Taguchi Method for Determining Optimum Surface Roughness in Turning of Medical Stainless Steel, Proceedings, International Scientific Conference - UNITECH 2014, Gabrovo, Bulgaria, 2014, Vol. III, pp. 316 -321
  13. Cica, Dj., et al., Prediction of Cutting Zone Temperature in High-Pressure Assisted Turning Using GA and PSO Based ANN, Journal of Production Engineering, 17 (2014), 1, pp. 43-46
  14. Madić, M., Radovanović, M., Modeling and Analysis of Correlations between Cutting Parameters and Cutting Force Components in Turning AISI 1043 Steel Using ANN, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 35 (2013), 2, pp. 111-121
  15. Rao, P. N., Manufacturing Technology Metal Cutting and Machine Tools, Tata McGraw-Hill Publica-tion Ltd., New Delhi, India, 2005
  16. Varma, D.R.S.V., et al., Cutting Temperatures in Machining of Titanium Alloy, Proceedings, 7th Na-tional Conference on Air Breathing Engines and Aerospace Propulsion, NCABE-2004, I. I. T. Kanpur, India, 2004, pp. 391-398
PDF VERSION [DOWNLOAD]
MODELING OF CUTTING TEMPERATURE IN THE BIOMEDICAL STAINLESS STEEL TURNING PROCESS

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence