THERMAL SCIENCE
International Scientific Journal
MODELING OF THERMOELECTRIC MODULE OPERATION IN INHOMOGENEOUS TRANSIENT TEMPERATURE FIELD USING FINITE ELEMENT METHOD
ABSTRACT
This paper is the result of research and operation modeling of the new systems for cooling of cutting tools based on thermoelectric module. A copper inlay with thermoelectric module on the back side was added to a standard turning tool for metal processing. For modeling and simulating the operation of thermoelectric module, finite element method was used as a method for successful solving the problems of inhomogeneous transient temperature field on the cutting tip of lathe knives. Developed mathematical model is implemented in the software package PAK-T through which numerical results are obtained. Experimental research was done in different conditions of thermoelectric module operation. Cooling of the hot module side was done by a heat exchanger based on fluid using automatic temperature regulator. After the calculation is done, numerical results are in good agreement with experimental. It can be concluded that developed mathematical model can be used successfully for modeling of cooling of cutting tools. [Projekat Ministarstva nauke Republike Srbije, br. TR32036]
KEYWORDS
PAPER SUBMITTED: 2013-01-12
PAPER REVISED: 2013-08-16
PAPER ACCEPTED: 2013-11-16
PUBLISHED ONLINE: 2014-07-06
THERMAL SCIENCE YEAR
2014, VOLUME
18, ISSUE
Supplement 1, PAGES [S239 - S250]
- Snyder J. G., et al., Hot Spot Cooling using Embedded Thermoelectric Coolers, SEMI-THERM 21th Symposium Proceedings, IEEE, Dallas, TX, USA,2006.
- Fairbanks. J., Chair's Overview of High Efficiency Thermoelectrics and Potential Applications, High Efficiency Thermoelectrics Workshop, San Diego, California, 2004.
- Beňo J., et al., Technologické a materiálové činitele obrábania, Vienala, Košice, 2004.
- Nikolić R., et al., Model of Temperature Field in the Cutting Tool During Dry Machining as a Basis for Researching the New Cooling Systems, 10th International Conference, RaDMI, Donji Milanovac, 2010.
- Vukelja D., Termodinamika rezanja, monografija, Građevinska knjiga, Beograd, 1990.
- Müller B., Thermische Analyse des Zerspanens metallischer Werkstoffe bei hohen Schnittgeschwindungkeiten, Ph. D. thesis, Fakultät für Maschinenwesen, Achen, 2004.
- Kojić M., et al., PAK-T - Program for FE Heat Transfer Analysis, Faculty of Mechanical Engineering, University of Kragujevac, Kragujevac, Serbia, 2003.
- M. Berkovic, S. Maksimovic and A. Sedmak, "Analysis of Welded Joints by Applying the Finite Element Method," Structural Integrity and Life, vol. 4, no. 2, pp. 75-83, 2004.
- Kojić M., et al., Finite Element Method I - Linear Analysis (in Serbian), Faculty of Mechanical Engineering, University of Kragujevac, Kragujevac, Serbia, 2003.
- Živković M., et al., Non-linear Transient Heat Conduction Analysis of Insulation Wall of Thank for Transportation of Liquid Aluminium, Thermal Science, 14 (2010), Issue Supplement, pp. S299-S312
- Lazić, V., et al., Theoretical-Experimental Determining of Cooling Time (t8/5) in Hard Facing of Steels for Forging Dies, Thermal Science, 14 (2010), Issue 1, pp. 235-246
- Kraftmakher, Y., Simple experiments with a thermoelectric module, European Journal of Physics, Volume 26 (2005), pp. 959-967
- Melcor Thermoelectric Handbook, Melcor Thermoelectrics, Trenton, New Jersey, USA, 2009.
- Thermoelectric Cooling, Part C: Electronics Cooling Methods in Industry, Mechanical Power Engineering Department, Faculty of Engineering, Cairo University, Egypt, 2011.
- FAQ About Peltier Cooling And Heating Technology, Tellurex, Traverse City, MI, USA, 2011.
- Lau, P.G., et al, Temperature and time dependent finite-element model of a thermoelectric couple, TE Technology, Traverse City, MI, USA, 1996
- HP-199-1.4-0.8, Thermoelectric Module (Peltier Module) Specifications, TE Technology, Traverse City, MI, USA, 2011.
- Melcor Liquid Heat Exchanger LI201CL, Product Information, Melcor Thermoelectrics, Trenton, New Jersey, USA, 2009.