THERMAL SCIENCE

International Scientific Journal

STUDY ON HEAT TRANSFER OF WAXY CRUDE OIL MELTING PHASE CHANGE BASED ON A NOVEL MODEL

ABSTRACT
The study of phase change heat transfer of crude oil melting is important for pre-heating and restarting of pipelines. Combining the characteristics of waxy crude oil characteristics of waxy crude oil melting, a novel mathematical model was established, which can accurately describe the non-linear release of latent heat, liquid-solid interface changes, natural convection, and other key heat transfer problems. In the process of heating and melting, the variation law of the solid-phase interface position in the pipe at different initial solidification states was analyzed. The results showed that in the partially solidified pipeline, the liquid crude oil in the pipeline has a higher temperature at the initial heating stage, and continuously loses heat to the low temperature crude oil, resulting in a decline in the liquid-phase ratio at the initial stage. Because crude oil was affected by different degrees of radial thermal resistance, latent heat release and porous medium characteristics at different positions of the pipeline, the temperature drop curves of the crude oil varies greatly.
KEYWORDS
PAPER SUBMITTED: 2023-04-03
PAPER REVISED: 2023-05-23
PAPER ACCEPTED: 2023-06-02
PUBLISHED ONLINE: 2023-07-16
DOI REFERENCE: https://doi.org/10.2298/TSCI230403152X
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2024, VOLUME 28, ISSUE Issue 1, PAGES [499 - 512]
REFERENCES
  1. Hong, Q. J, et al., A Pore-Scale Visualized Study of Melting Heat Transfer of a Paraffin Wax Saturated in a Copper Foam: Effects of the Pore Size, Int. J. Heat Mass Transfer, 112 (2017), Sept., pp. 39-44
  2. Korawan, A. D., et al., 3D Numerical and Experimental Study on Paraffin Wax Melting in Thermal Storage for the Nozzle-and-Shell Tube-and-Shell, and Reducer-and-Shell Models. Model Simul. Eng., 2017 (2017), ID9590214
  3. Wei, H., et al., Optimal Thermal Management of Server Cooling System Based Cooling Tower Under Different Ambient Temperatures, Applied Thermal Engineering, 207 (2022), May, pp. 118-176
  4. Seddegh, S., et al., Numerical Investigation of Heat Transfer Mechanism in a Vertical Shell and Tube Latent Heat Energy Storage System, Applied Thermal Engineering, 87 (2015), Aug., pp. 698-706
  5. Mao, Q., Zhang, Y., Thermal Energy Storage Performance of a Novel Three-PCM Cascade Tank in a High-Temperature Packed Bed System. Renewable Energy, 152 (2020), June, pp. 110-119
  6. Xu, Y., et al., Effects of Crude Oil's Variable Physical Properties on Temperature Distribution in a Shutdown Pipeline, Advances in Mechanical Engineering, 9 (2017), 4, pp. 1-9
  7. Xu, Y., et al., Heat Transfer Analysis of Waxy Crude Oil Under a New Wide Phase Change Partition Model, Numerical Heat Transfer, Part A: Applications, 76 (2019), 12, pp. 991-1005
  8. Yu, G. J., et al., A New General Model for Phase-Change Heat Transfer of Waxy Crude Oil During the Ambient Induced Cooling Process, Numerical Heat Transfer, Part A, 71 (2017), 5, pp. 511-527
  9. Mao, Q., et al., Study on the Influence of Tank Structure and Fin Configuration on Heat Transfer Performance of Phase Change Thermal Storage System, Energy, 235 (2021), 121382
  10. Drissi, S., et al., Thermal Analysis by DSC of Phase Change Materials, Study of the Damage Effect, Journal of Building Engineering, 1 (2015), Mar., pp. 13-19
  11. Sun, X. Q., et al., Experimental Observations on the Heat Transfer Enhancement Caused by Natural Convection During Melting of Solid-Liquid Phase Change Materials (PCMs), Applied Energy, 162 (2016), Jan., pp.1453-1461
  12. Kousksou, T., et al., An Implicit Enthalpy Formulation for Macroscopic Eutectic and Progressive Melting: DSC (Differential Scanning Calorimetry) Applications, Energy, 66 (2014), Mar., pp. 919-926
  13. Chen, W.-H., Jiang, L.-L., Numerical Simulation of New Phase-change Finned Tube Heat Accumulators (in Chinese). Chemical Machinery, 38 (2011), 6, pp. 730-733
  14. Jin, R.-F., et al., Numerical Simulation of Discharging Process for a Shell-tube Phase Change Thermal Storage (in Chinese), Building Energy & Environment, 28 (2009), 1, pp. 14-17
  15. Ma, C., et al., Electrical Treatment of Waxy Crude Oil to Improve Its Cold Flowability, Industrial & Engineering Chemistry Research, 56 (2017), 38, pp. 10920-10924
  16. Lize, M. S. L., Oliveira, et al., Wax Behavior in Crude Oils by Pour Point Analyses, Braz. Chem,Soc, 29 (2018), 10, pp. 2158-2168
  17. Paska, J., et al., Hybrid Power Systems - An Effective Way of Utilising Primary Energy Sources, Renewable Energy, 34 (2009), 11, pp. 2414-2421
  18. Mao, Q., Recent Developments in Geometrical Configurations of Thermal Energy Storage for Concentrating Solar Power Plant, Renewable & Sustainable Energy Reviews, 59 (2016), June., pp. 320-327

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence