THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

Koray Karabulut

HEAT TRANSFER INCREMENT STUDY TAKING INTO CONSIDERATION FIN LENGTHS FOR CUO-WATER NANOFLUID IN CROSS FLOW-IMPINGING JET FLOW CHANNELS

ABSTRACT
In this study, the heat transfer and flow characteristics for cube and circular hollow models in channels with the cross-flow-impinging jet-flow were numerically investigated by using water and 2% CuO-water nanofluid. The numerical work was carried out steady and 3-D using the ANSYS-FLUENT program with the k-ε turbulence model. A fin with 45° and 90° angles and D, 1.166 D, and 1.333 D (K) lengths was added to the upper channel surface from the impinging jet inlet at D (N) distance. A constant heat flux of 1000 W/m2 was applied to the model surfaces. The channel height is fixed in 3D (H) and the Reynolds number range of the fluids is 5000-15000. The numerical results obtained from the study were compared with the results of the experimental study in the literature and it was seen that the results were compatible and acceptable. The results of the study were examined as the mean Nusselt number, surface temperature, and performance evaluation coefficient variations for each model in the channels. Also, velocity and temperature contour distributions of the combined jet CuO-water nanofluid flow were visual-ized. The average Nusselt number increases for CuO-water nanofluid at Re = 15000, K = D, and 90° fin angle are 32.55% and 26.11% compared to with-out fin and water fluid for cube and circular hollow models, respectively.
KEYWORDS
Cross flow-impinging jet flow, CuO-water nanofluid, Fin length
PAPER SUBMITTED: 2022-12-03
PAPER REVISED: 2023-01-11
PAPER ACCEPTED: 2023-01-19
PUBLISHED ONLINE: 2023-02-11
DOI REFERENCE: https://doi.org/10.2298/TSCI221203035K
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2023, VOLUME 27, ISSUE Issue 6, PAGES [4345 - 4360]
REFERENCES
  1. Kilic, M., Investigation of Combined Effect of Nanofluids and Impinging Jets on Cooling of Electronic Systems, Cukurova University Journal of the Faculty of Engineering Architecture, 18 (2018), Sept., pp. 121-132
  2. Teamah, M. A., et al., Numerical and Experimental Investigation of Flow Structure and Behavior of Nanofluids Flow Impingement on Horizontal Flat Plate, Experimental Thermal Fluid Science, 74 (2015), June, pp. 235-246
  3. Karabulut, K., Alnak, D. E., Study of Cooling of the Varied Designed Warmed Surfaces with an Air Jet Impingement, Pamukkale University Journal of Engineering Science, 26 (2020), 1, pp. 88-98
  4. Zou, L., et al., Evaluation of Interfacial Heat Transfer Coefficient Based on the Experiment and Numerical Simulation in the Air-Cooling Process, Heat and Mass Transfer, 58 (2022), 2, pp. 337-354
  5. Demircan, T., Numerical Analysis of Cooling An Electronic Circuit Component with Cross-flow and Jet Combination, Journal of Mechanics, 35 (2019), 3, pp. 395-404
  6. Ozturk, S. M., Demircan, T., Numerical Analysis of the Effects of Fin Angle on Flow and Heat Transfer Characteristics for Cooling an Electronic Component with Impinging Jet and Cross-Flow Combination, Journal of the Faculty of Engineering and Architecture of Gazi University, 37 (2022), 1, pp. 57-74
  7. Kumar, D., et al., Heat Sink Analysis in Jet Impingement with Air Foil Pillars and Nanoparticles, Materials Today: Proceedings, 46 (2021), 20, pp. 10752-10756
  8. Selimefendigil, F., Chamkha, A. J., Cooling of an Isothermal Surface Having a Cavity Component by Using Cuo-Water Nano-Jet, International Journal of Numerical Methods Heat & Fluid Flow, 30 (2020), 4, pp. 2169-2191
  9. Abdullah, M. F., et al., Impact of the TiO2 Nano Solution Concentration on Heat Transfer Enhancement of the Twin Impingement Jet of a Heated Aluminum Plate, Micromachines, 10 (2019), 3, 176
  10. Datta, A., et al., Heat Transfer Analysis of Slot Jet Impingement using Nano-Fluid on Convex Surface, Proceedings, 2nd International Conference on Advances in Mechanical Engineering (ICAME 2018) Kattankulathur, India, 2018, Vol. 402, pp. 1-6
  11. Kareem, Z. S., et al., Heat Transfer Enhancement in Single Circular Impingement Jet by CuO-water Nanofluid, Case Studies in Thermal Engineering, 15 (2019), Nov., 100508
  12. Kilic, M., et al., Experimental and Numerical Study of Heat Transfer from a Heated Fat Plate in a Rectangular Channel with an Impinging Air Jet, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (2016), Mar., pp. 329-344
  13. Karabulut, K., Heat Transfer Improvement Study of Electronic Component Surfaces using Air Jet Impingement, Journal of Computational Electronics, 18 (2019), 4, pp. 1259-1271
  14. Maxwell, J. C., A Treatise on Electricity and Magnetism, Clarendon Press, Oxford, UK, 1873
  15. Mohammed, H. A., et al., The Impact of Various Nanofluid Types on Triangular Microchannels Heat Sink Cooling Performance, International Communications in Heat and Mass Transfer, 38 (2011), 6, pp. 767-773
  16. Wang, S. J., Mujumdar, A. S., A Comparative Study of Five Low Reynolds Number k-ε Models for Impingement Heat Transfer, Appield Thermal Engineering, 25 (2005), 1, pp. 31-44
  17. Genc, M. S., et al., Flow over an Aerofoil without and with a Leading-Edge Slat at a Transitional Reynolds Number, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 223 (2009), 3, pp. 217-231
  18. Saleha, N., et al., Improving Cooling Effectiveness by use Chamfers on the Top of Electronic Components, Microelectronic Reliability, 55 (2015), 7, pp. 1067-1076
  19. Ma, C. F., Bergles, A. E. Boiling Jet Impingement Cooling of Simulated Microelectronic Chips, Heat Transfer Electronic Equipment HTD, 28 (1983), 1983, pp. 5-12
  20. Masip, Y., et al., Experimental Study of the Turbulent Flow Around a Single Wall-Mounted Cube Exposed to a Cross-Flow and an Impinging Jet, International Journal of Heat and Fluid Flow, 38 (2012), Dec., pp. 50-71
  21. Bhatti, M. M., et al., Magnetic Nanoparticles for Drug Delivery through Tapered Stenosed Artery with Blood Based Non-Newtonian Fluid, Pharmaceuticals, 15 (2022), 11, 1352
  22. Ellahi, R., et al., Numerical Simulation and Mathematical Modeling of Electro-Osmotic Couette-Poiseuille Flow of MHD Power-Law Nanofluid with Entropy Generation, Symmetry, 11 (2019), 8, 1038
  23. Ali Abro, K., et al., Effects of Carbon Nanotubes on Magnetohydrodynamic Flow of Methanol Based Nanofluids via Atanganabaleanu and Caputo-Fabrizio Fractional Derivatives, Thermal Science, 23 (2019), 2B, pp. 883-898
  24. Ellahi, R. The Effects of MHD and Temperature Dependent Viscosity on the Flow of Non-Newtonian Nanofluid in A Pipe: Analytical Solutions, Applied Mathematical Modelling, 37 (2013), 3, pp. 1451-1467
PDF VERSION [DOWNLOAD]
Heat transfer increment study taking into consideration fin lengths for CuO-water nanofluid in cross flow-impinging jet flow channels

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence