THERMAL SCIENCE

International Scientific Journal

Vildan Ozkan Bilici

,

Gunnur Pesmen

,

Ahmet Yonetken

,

Ayhan Erol

EFFECT OF VARIATION OF EGG-SHELL PARTICULATE REINFORCEMENT ON ULTRASONIC PULSE VELOCITY, ATTENUATION, AND HARDNESS PREDICTION IN CERAMIC-METAL COMPOSITES

ABSTRACT
In this study, ceramic-metal composite material reinforced with additive prepared from waste egg-shell was produced. Waste egg-shells were cleaned, dried, ground and then sieved. The effects of egg-shell reinforcement ratio (0%, 1.66%, 3.34%, 5%, and 6.66 % by volume) and sintering temperature (1400°C) applications on Fe-B4C ceramic-metal powders were tested. For this purpose, tests such as ultrasonic test, hardness and density were applied to the composite material, and finally, microstructural analysis was performed on the composites by SEM application. The changes in the crystal structure of the egg-shell after sintering were revealed by diffractograms analysis. It was observed that the hardness, ultrasonic longitudinal and transverse wave velocities also increased with the increase in the reinforcement ratios of the egg-shell. Considering the 6.66% egg-shell addition to the ceramic-metal composite mixture, in the light of the numerical data obtained, 5091 m/s longitudinal wave velocity, 2809 m/s transverse wave velocity, 204.12 Hv hardness value, 0.315 dB per mm longitudinal attenuation and 0.214 dB per mm transverse attenuation values with gave the best physical and mechanical properties. According to the test results obtained, it was determined that it would be appropriate to use the egg-shell in the production of composite materials and to characterize it with the ultrasonic test method.
KEYWORDS
waste egg-shell, ceramic-metal composite, ultrasonic test, recycles
PAPER SUBMITTED: 2023-01-25
PAPER REVISED: 2023-04-13
PAPER ACCEPTED: 2023-05-12
PUBLISHED ONLINE: 2023-09-17
DOI REFERENCE: https://doi.org/10.2298/TSCI2304179B
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2023, VOLUME 27, ISSUE Issue 4, PAGES [3179 - 3188]
REFERENCES
  1. Vinod, A., et al., Renewable and Sustainable Biobased Materials: An Assessment on Biofibers, Bio-films, Biopolymers and Biocomposites, J. Clean. Prod., 258 (2020), June, 120978
  2. Das, O., et al., Natural and Industrial Wastes for Sustainable and Renewable Polymer Composites, Renew. Sust. Energ. Rev., 158 (2022), Apr., 112054
  3. Palencia, M., et al., Polymer-Metal Oxide Composites from Renewable Resources for Agricultural and Environmental Applications, in: Renewable Polymers and Polymer-Metal Oxide Composites: Synthesis, Properties, and Applications (Ed. Sajjad Haider and Adnan Haider), Elsavier, Amsterdam, The Netherlands, 2022, pp. 341-370
  4. Igwe, I. O., Onuegbu, G. C., Studies on Properties of Eggshell and Fish Bone Powder Filled Polypropylene, Am. J. Polym. Sci., 2 (2012), 4, pp. 56-61
  5. Yıldız, A., Mechanical Properties of Mortar Using Eggshell, Karaelmas Sci. Eng. J., 8 (2018), 2, pp. 570-574
  6. Kuru, D., et al., Effect of Chicken Feather and Boron Compounds As Filler on Mechanical and Flame Retardancy Properties of Polymer Composite Materials, Waste Manag. Res., 36 (2018), 11, pp. 1029-1036
  7. Oliveira, D. A., et al., A Literature Review on Adding Value to Solid Residues: Egg Shells, J. Clean. Prod., 46, (2013), May, pp. 42-47
  8. Lee, M., et al., Reusing Shell Waste as a Soil Conditioner Alternative? A Comparative Study of Egg-shell and Oyster Shell Using A Life Cycle Assessment Approach, J. Clean. Prod., 265 (2020), Aug., 121845
  9. Nys, Y., Gautron, J., Structure and Formation of the Eggshell, in: Bioactive Egg Compounds, (eds. R. Huopalahti, R. López-Fandino, M. Anton, R. Schade), Springer, Berlin, 2007, pp. 99-113
  10. Mukarami, F. S., et al., Physicochemical Study of CaCO3 from Egg Shells, J. Food Sci. Technol., 27, (2007), 3, pp. 658-662
  11. Srivastava, A. K., et al., A Review on the Intensification of Metal Matrix Composites and Its Non-conventional Machining, Sci. Eng. Compos. Mater., 25 (2016), 2, pp. 213-228
  12. Sohag, M. A. S., et al., Effect of Ceramic Reinforcement on the Microstructural, Mechanical and Tribological Behavior of Al-Cu Alloy Metal Matrix Composite, Mater. Today: Proc., 21 (2020), 3, pp. 1407-1411
  13. Rajaram, S., et al., Experimental Investigation of Mechanical Properties of AA6063/ZrO2 Metal Matrix Composites, Mater. Today: Proc., 74 (2023), 1, pp. 105-109
  14. Yönetken, A., Production and Investigation of Ceramic Metal Composite from Electroless Ni Plated AlN and Al Powders, Int. J. Innov. Res. Technol. Sci. Eng., 6 (2017), 10, pp. 21-26, ISSN(Online): 2319-8753
  15. Gupta, P. K., Srivastava, R. K., Fabrication of Ceramic Reinforcement Aluminium and Its Alloys Metal Matrix Composite Materials: A Review, Mater. Today: Proc., 5 (2018), 9 (3), pp. 18761-18775
  16. Kim, E. H., et al., Fabrication and Mechanical Properties of Metal Matrix Composite with Homogeneously Dispersed Ceramic Particles, Ceram. Int., 39 (2013), 6, pp. 6503-6508
  17. Ozer, S., et al., Effects of Fusel Oil Use in a Thermal Coated Engine, Fuel, 306 (2021), Dec., 121716
  18. Demircioğlu, P., et al., Improving Manufacturing Process of Mobile Recorder, in: Digital Conversion on the Way to Industry 4.0. ISPR 2020. Lecture Notes in Mechanical Engineering, (Eds. Durakbasa, N. M., Gençyılmaz, M. G.), Springer, Cham., Berlin, Germany, 2021
  19. Tufan, O., et al., Design and Development of Drum Granulator, in: Digital Conversion on the Way to Industry 4.0. ISPR 2020. Lecture Notes in Mechanical Engineering, (Eds. Durakbasa, N. M., Gençyılmaz, M. G.), Springer, Cham., Berlin, Germany, 2021
  20. Yonetken, A., et al., Characterization of Egg-Shell Powder-Doped Ceramic-Metal Composites, Open Chemistry, 20 (2022), 1, pp. 716-724
  21. Yonetken, A., et al., Production and Characterization of Ti-10Cr-3,33Co-3,33 Egg Shelter Composite Materials Using by Powder Metallurgy, J. Mech. Eng. Res. Dev., 12 (2020), 1, pp. 158-165
  22. Hassan, S. B., Aigbodion, V. S., Effects of Eggshell on the Microstructures and Properties of Al-Cu-Mg/Eggshell Particulate Composites, J. King Saud Univ. Eng. Sci., 27 (2015), 1, pp. 49-56
  23. Hussein, M. A., et al., Processing and in Vitro Corrosion Analysis of Sustainable and Economical Egg-shell Reinforced Mg and Mg-Zr Matrix Composite for Biomedical Applications, Mater. Today Commun., 32 (2022), Aug., 103944
  24. Aigbodion, V. S., Insights in the Enhancement of Electrical Conductivity and Dielectric Constant of Epoxy-Carbon Nanotubes Decorated with CaCo3-Derived from Waste Eggshell Hybrid Composites, J. Indian Chem. Soc., 99 (2022), 10, 100736
  25. Demirdal, S., Aydın, F., The Influence of Low-Cost Eggshell on the Wear and Electrochemical Corrosion Behaviour of Novel Pure Mg Matrix Composites, Mater. Chem. Phys., 277 (2022), Feb., 125520
  26. Yadav, R., et al., Eggshell and Rice Husk Ash Utilization As Reinforcement in Development of Composite Material: A Review, Mater. Today: Proc., 43 (2021), 1, pp. 426-433
  27. Dwivedi, R., et al., Parametric Optimization of Process Parameters During the Friction Stir Processing of Al7075/SiC/Waste Eggshell Surface Composite, Mater. Today: Proc., 47 (2021),13, pp. 3884-3890
  28. Sharma, S., Dwivedi, S. P., Effects of Waste Eggshells and SiC Addition on Specific Strength and Thermal Expansion of Hybrid Green Metal Matrix Composite, J. Hazard. Mater., 333 (2017), July, pp. 1-9
  29. Li, Y., et al., The Physical Properties of Poly(l-lactide) and Functionalized Eggshell Powder Composites, Int. J. Biol. Macromol., 85 (2016), Apr., pp. 63-73
  30. Khan, K., et al., Investigating the Feasibility of Using Waste Eggshells in Cement-Based Materials for Sustainable Construction, J. Mater. Res. Technol., 23 (2023), Mar.-Apr., pp. 4059-4074
  31. Zhang, G., et al., Investigation of Frequency-Dependent Attenuation Coefficients for Multiple Solids Using A Reliable Pulse-Echo Ultrasonic Measurement Technique, Measurement, 177, (2021), June, 109270
  32. Robinson, D. E., et al., Measurement of Velocity of Propagation from Ultrasonic Pulse-Echo Data, Ultrasound Med. Biol., 8, (1982), 4, pp. 413-415, 417-420
  33. Tian, F., et al., An Ultrasonic Pulse-Echo Method to Detect Internal Defects in Epoxy Composite Insulation, Energies, 12 (2019), 24, 4804
  34. Gür, C. H., Ogel, B., Non-destructive Microstructural Characterization of Aluminium Matrix Composites by Ultrasonic Techniques, Mater. Charact., 47 (2001), 3-4, pp. 227-233
  35. Podymova, N. B., et al., Effect of Porosity on the Statistical Amplitude Distribution of Backscattered Ul-trasonic Pulses in Particulate Reinforced Metal-Matrix Composites, Ultrasonics, 108, (2020), Dec., 106235
  36. Ozkan, V., et al., Influence of Mean Grain Size with Ultrasonic Velocity on Micro-Hardness of B4C-Fe-Ni Composite, J. Alloys Compd., 574 (2013), Oct., pp. 512-519
  37. Erol, A., et al., Characterization of the Elastic Modulus of Ceramic-Metal Composites with Physical and Mechanical Properties by Ultrasonic Technique, Open Chem., 20 (2022), July, pp. 593-601
  38. Unal, R., et al., The Mean Grain Size Determination of Boron Carbide (B4C) -Aluminium (Al) and Boron Carbide (B4C)-Nickel (Ni) Composites by Ultrasonic Velocity Technique, Mater. Charact., 56 (2006), 3, pp. 241-244
  39. Yonetken, A., Bilici, V. Ö., Ultrasonic and Mechanical Characterization of Borided Ceramic-Metal Composite, Russ. J. Nondestruct. Test, 58 (2022), Dec., pp. 779-789
  40. Toozandehjani, M., et al., Velocity and Attenuation of Ultrasonic Wave in Al-Al2O3 Nanocomposite and Their Correlation to Microstructural Evolution During Synthesizing Procedure, J. Mater. Res. Technol., 15 (2021), Nov., pp. 2529-2542
  41. Filho, S. L. M. R., et al., Ultrasonic Pulse Velocity and Physical Properties of Hybrid Composites: A Statistical Approach, Hybrid Adv., 2 (2013), Apr., 100024
  42. Parihar, H. S., et al., Effect of Variation of Steel Reinforcement on Ultrasonic Pulse Velocity Prediction in Concrete Beam, Mater. Today: Proc., 65 (2022), 2, pp. 1486-1490
  43. Gültekin E. E., The Effect of Heating Rate and Sintering Temperature on the Elastic Modulus of Porcelain Tiles, Ultrasonics, 83 (2018), Feb., pp. 120-125
  44. Toozandehjani, M., et al., Characterization of Aging Behavior of AA6061 Aluminum Alloy Through Destructive and Ultrasonic Non-destructive Testing Techniques, Trans. Indian Inst. Met., 68 (2015), Dec., pp. 561-569
  45. Nan, J., et al., Particle Size Distribution Measurement Based on Ultrasonic Attenuation Spectra Using Burst Superposed Wave, Results Phys., 13, (2019), June, 102273
  46. Wang, J., et al., Frequency Dependence of Sound Speed and Attenuation in Fine-Grained Sediments from 25 to 250 kHz Based on A Probe Method, Ocean Eng., 160 (2018), July, pp. 45-53
  47. Jodhani, J., et al., Ultrasonic Non-destructive Evaluation of Composites: A review, Mater. Today: Proc., 78 (2022), 3, pp. 627-632
  48. Ramesh, C., et al., Evaluation of Mechanical Properties of Polyamide-Eggshell Powder Composite Materials, Int. J. Sci. Technoledge, 2 (2014), 1, pp. 90-95
  49. Zaman, T., et al., Evolution and Characterization of Eggshell as A Potential Candidate of Raw Material, Ceramica, 64 (2018), 370, pp. 236-241
  50. Katırcıoğlu-Bayel, D., Fire Retardant Mineral Fillers, OHU J. Eng. Sci., 7 (2018), 3, pp. 1175-1179
PDF VERSION [DOWNLOAD]
Effect of variation of egg-shell particulate reinforcement on ultrasonic pulse velocity, attenuation, and hardness prediction in ceramic-metal composites

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence