THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

Sien Chen

WASTE HEAT RECOVERY AND REUSE FOR SHIP HYDRAULIC OIL TEMPERATURE CONTROL SYSTEM

ABSTRACT
In order to solve the problems of high energy consumption and serious waste of heat energy in the traditional oil cooler of Marine hydraulic system, the waste heat recovery and reuse of Marine hydraulic oil temperature control system is proposed. The hydraulic system waste heat recovery test platform has been established, the influence of electrical load, oil flow rate and working medium flow rate on system operation and energy characteristics is studied. The experimental results show that under the same working condition, compared with the oil cooler of the same specification, the maximum thermal efficiency of the proposed organic Rankine cycle waste heat recovery system is increased to 2.56%. The expander pressure ratio and system thermal efficiency increase with the increase of electric load and oil flow. The experimental results analyzed the energy saving effect of waste heat recovery system on hydraulic system, and obtained the rule of system operation efficiency.
KEYWORDS
hydraulic system, waste heat recovery, organic Rankine cycle, experimental research, operating characteristics
PAPER SUBMITTED: 2022-09-27
PAPER REVISED: 2022-11-26
PAPER ACCEPTED: 2022-12-02
PUBLISHED ONLINE: 2023-03-25
DOI REFERENCE: https://doi.org/10.2298/TSCI2302257C
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2023, VOLUME 27, ISSUE Issue 2, PAGES [1257 - 1263]
REFERENCES
  1. Mahato, A. C., et al., Energy-Saving Strategies on Power Hydraulic System: An Overview, Proceedings of the Institution of Mechanical Engineers - Part I: Journal of Systems and Control Engineering, 235 (2021), 2, pp. 147-169
  2. Dang, X., et al., Incomplete Differentiation-Based Improved Adaptive Backstepping Integral Sliding Mode Control for Position Control of Hydraulic System, ISA Transactions, 109 (2021), 2, pp. 199-217
  3. Li, C., et al., Precision Motion Control of an Independent Metering Hydraulic System With Non-Linear Flow Modelling and Compensation, IEEE Transactions on Industrial Electronics, 69 (2021), 7, pp. 7088-7098
  4. Peixin, G. A. O., et al., Vibration Analysis and Control Technologies of Hydraulic Pipe-Line System in Aircraft: A Review, Chinese Journal of Aeronautics, 34 (2021), 4, pp. 83-114
  5. Abdillah, A. A., Optimization of the Hydraulic System in the Excavator Arm Simulator, Jurnal Poli-Teknologi, 20 (2021), 2, pp. 145-151
  6. Sun, F., et al., Sensitive Monitoring Particles Conveying in Water Hydraulic System Via a Facile Molding Conductive Hydrogel, IEEE Sensors Journal, 21 (2021), 9, pp. 10506-10513
  7. Gong, S., et al., High Thermal Conductivity and Mechanical Strength Phase Change Composite with Double Supporting Skeletons for Industrial Waste Heat Recovery, ACS Applied Materials and Interfaces, 13 (2021), 39, pp. 47174-47184
  8. Varshil, P., et al., A Comprehensive Review of Waste Heat Recovery from a Diesel Engine Using Organic Rankine Cycle, Energy Reports, 7 (2021), 2, pp. 3951-3970
  9. Sharma, G., et al., Performance of Diesel Engine Having Waste Heat Recovery System Fixed on Stainless Steel Made Exhaust Gas Pipe, Materials Today: Proceedings, 48 (2022), 2, pp. 1141-1146
  10. Kose, O., et al., Is Kalina Cycle or Organic Rankine Cycle for Industrial Waste Heat Recovery Applications, A Detailed Performance, Economic and Environment Based Comprehensive Analysis, Process Safety and Environmental Protection, 163 (2022), 2, pp. 421-437
  11. Zhao, J., et al., Industrial Reheating Furnaces: A Review of Energy Efficiency Assessments, Waste Heat Recovery Potentials, Heating Process Characteristics and Perspectives for Steel Industry, Process Safety and Environmental Protection, 147 (2021), 2, pp. 1209-1228
  12. Yaglı, H., et al., Optimisation of Simple and Regenerative Organic Rankine Cycles Using Jacket Water of an Internal Combustion Engine Fuelled with Biogas Produced from Agricultural Waste, Process Safety and Environmental Protection, 155 (2021), 2, pp. 17-31
  13. Yu, X., et al., Numerical Investigation of a New Combined Energy Cycle Based on Miller Cycle, Organic Rankine Cycle, Stirling Engine and Alkaline Fuel Cell, Energy Reports, 7 (2021), 1, pp. 5406-5419
  14. Azad, A., et al., Analysis and Optimization of a Fuel Cell Integrated with Series Two-Stage Organic Rankine Cycle with Zeotropic Mixtures, International Journal of Hydrogen Energy, 47 (2022), 5, pp. 3449-3472
  15. Konur, O., et al., A Comprehensive Review on Organic Rankine Cycle Systems Used as Waste Heat Recovery Technologies for Marine Applications, Energy Sources - Part A: Recovery, Utilization, and Environmental Effects, 44 (2022), 2, pp. 4083-4122
  16. Wang, J., et al., Structural Assessment of Printed Circuit Heat Exchangers in Supercritical CO2 Waste Heat Recovery Systems for Ship Applications, Journal of Thermal Science, 31 (2022), 3, pp. 689-700
  17. Manjunath, K., et al., Entropy Generation and Thermoeconomic Analysis of Printed Circuit Heat Exchanger Using Different Materials for Supercritical CO2 Based Waste Heat Recovery, Materials Today: Proceedings, 21 (2020), 1, pp. 1525-1532
PDF VERSION [DOWNLOAD]
Waste heat recovery and reuse for ship hydraulic oil temperature control system

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence