ABSTRACT
The two-phase loop thermosyphon (TPLT) is generally a technique used in conjunc¬tion with a fan when cooling an electronic chip to enhance the cooling effect. In this context, the TPLT heat transfer efficiency is directly affected by the vibration caused by the associated fan. In this paper, the heat transfer performances of TPLT with diameters of 4 mm, 6 mm, and 8 mm were experimentally investigated under a heat¬ing power capacity ranging from 40-400 W, a filling ratio of 40-70%, and a 30 m/s2 35 Hz vertical reciprocating vibration. The heat transfer performance of the TPLT is compared to the case of operation under the same working conditions in a static state. The influence of the vibration state caused by the fan rotation on the heat transfer performance of TPLT with different diameters is analyzed and discussed. The obtained results indicated that vertical vibration does not change the trend of TPLT heat transfer performance with the corresponding heating power capacity un¬der each pipe diameter. On the other hand, it was found that the vibration enhances or inhibits the heat transfer characteristics of TPLT, affected by the pipe diameter, the heating power capacity, and the liquid filling ratio.
KEYWORDS
PAPER SUBMITTED: 2022-05-30
PAPER REVISED: 2022-10-05
PAPER ACCEPTED: 2022-10-25
PUBLISHED ONLINE: 2022-12-17
THERMAL SCIENCE YEAR
2023, VOLUME
27, ISSUE
Issue 2, PAGES [1587 - 1596]
- Bondarenko, B. I., et al., The Effect of Nanofluids on the Heat Transfer Capacity of Miniature Thermosyphons for Electronics Cooling, Technical Physics Letters, 45 (2019), 3, pp. 299-303
- Cao, J. Y., et al., A Review on Independent and Integrated/Coupled Two-Phase Loop Thermosyphons, Applied Energy, 280 (2020), 115885
- Albertsen, B., et al., Experimental Parameter Studies on a Two-Phase Loop Thermosyphon Cooling System with R1233zd(E) and R1224yd(Z), International Journal of Refrigeration, 131 (2021), Nov., pp. 146-156
- Bai, Y., et al., Characteristic Map of Working Mediums in Closed Loop Two-Phase Thermosyphon: Thermal Resistance and Pressure, Applied Thermal Engineering, 174 (2020), 115308
- Bondarenko, B. I., et al., The Effect of Nanofluids on the Heat Transfer Capacity of Miniature Thermosyphons for Electronics Cooling, Technical Physics Letters, 45 (2019), 3, pp. 299-303
- Ding, T., et al., Experimental Study on a Loop Thermosyphon Cooling System in Data Centers Using CO2 as a Working Fluid, Especially Thermal Environment and Energy-Saving Effect, Applied Thermal Engineering, 175 (2020), 115359
- Elkholy, A., Kempers, R., Experimental Investigation of Geyser Boiling in a Small Diameter Two-Phase Loop Thermosyphon, Experimental Thermal and Fluid Science, 118 (2020), 110170
- Zhang, T., et al., Investigation on the Optimum Volume-Filling Ratio of a Loop Thermosyphon Solar Water-Heating System, Journal of Solar Energy Engineering, 138 (2016), 4, pp. 1-10
- Chang, T B., Wang, Z. L., Experimental Investigation into Effects of Ultrasonic Vibration on Pool Boiling Heat Transfer Performance of Horizontal Low-Finned U-Tube in TiO2/R141b Nanofluid, Heat and Mass Transfer, 52 (2016), 11, pp. 2381-2390
- Heris, S. Z., et al., Effect of Electric Field on Thermal Performance of Thermosyphon Heat Pipes Using Nanofluids, Materials Research Bulletin, 53 (2014), May, pp. 21-27
- Li, F. J., et al., Thermal Performance of a R600a Two-Phase Loop Thermosiphon in Rotational Shaft, Heat and Mass Transfer, 57 (2021), Apr., pp. 1763-1772
- Abou-Ziyan, H. Z., et al., Performance of Stationary and Vibrated Thermosyphon Working with Water and R134a, Applied Thermal Engineering, 21 (2001), 8, pp. 813-830
- Alaei, A., et al., A New Designed Heat Pipe: An Experimental Study of the Thermal Performance in the Presence of Low-Frequency Vibrations, Heat and Mass Transfer, 48 (2011), 4, pp. 719-723
- Alaei, A., et al., A Vertical Heat Pipe: An Experimental and Statistical Study of the Thermal Performance in the Presence of Low-Frequency Vibrations, Heat and Mass Transfer, 49 (2013), Aug., pp. 285-290
- Sarafraz, M. M., et al., Low-Frequency Vibration for Fouling Mitigation and Intensification of Thermal Performance of a Plate Heat Exchanger Working with CuO/Water Nanofluid, Applied Thermal Engineering, 121 (2017), July, pp. 388-399
- Coleman, H. W., Steele, W. G., Experimentation Validation and Uncertainty Analysis for Engineers, Journal of Engineering for Industry, 113 (1991), 2, pp. 343-344
- Amir, A., et al., A Vertical Heat Pipe: An Experimental and Statistical Study of the Thermal Performance in the Presence of Low-Frequency Vibrations, Heat and Mass Transfer, 49 (2013), Aug., pp. 285-290
- Yang, H., et al., Performance Characteristics of Pulsating Heat Pipes as Integral Thermal Spreaders, International Journal of Thermal Sciences, 48 (2009), 4, pp. 815-824