THERMAL SCIENCE
International Scientific Journal
STUDY ON HEAT TRANSFER MODEL THEORY AND NUMERICAL SIMULATION USED IN DEEP ROCK IN-SITU TEMPERATURE-PRESERVED CORING
ABSTRACT
Deep rock in-situ temperature-preserved corers are important when evaluating and developing deep resources. The core temperature change law is the basis for realizing thermal insulation coring during coring, and it is explored from the perspective of the theoretical heat transfer model and numerical simulation. The results indicate that at a 150°C deep rock temperature, the theoretical calculation results only have a difference of approximately 4% compared with the minimum value of numerical simulation. With increasing core lifting speed, the core cooling range decreases, the power demand for active thermal insulation decreases. A core lifting speed of 2.5 m/s can meet the lower energy supply requirements and engineering costs at the same time. The research results can provide theoretical and technical support for deep resource mining.
KEYWORDS
PAPER SUBMITTED: 2022-08-19
PAPER REVISED: 2022-11-22
PAPER ACCEPTED: 2022-11-25
PUBLISHED ONLINE: 2023-03-04
THERMAL SCIENCE YEAR
2023, VOLUME
27, ISSUE
Issue 1, PAGES [639 - 646]
- Xie, H. P., et al., Research and Development of Rock Mechanics in Deep Ground Engineering (in Chinese), Chinese Journal of Rock Mechanics and Engineering, 34 (2015), 11, pp. 2161-2178
- Xie, H. P., et al., Quantitative Definition and Investigation of Deep Mining (in Chinese), Journal of China Coal Society, 40 (2015), 1, pp. 1-10
- Xie, H. P., Research Framework and Anticipated Results of Deep Rock Mechanics and Mining Theory (in Chinese), Advanced Engineering Sciences, 49 (2017), 2, pp. 1-16
- Gao, M. Z., et al., The Novel Idea and Technical Progress of Lunar In-situ Condition Preserved Coring, Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 8 (2022), 2, pp. 885-897
- Zhou, H. W., et al., Experimental Study of The Effect of Depth on Mechanical Parameters of Rock (in Chinese), Chinese Science Bulletin, 55 (2010), 34, pp. 3276-3284
- Xie, H. P., et al., Mechanical Behavior of Brittle-Ductile Transition in Rocks at Different Depths (in Chinese), Journal of China Coal Society, 46 (2021), 3, pp. 701-715
- Gao, M. Z., et al., Discing Behavior and Mechanism of Cores Extracted from Songke-2 Well at Depths Below 4500 m, International Journal of Rock Mechanics and Mining Sciences, 149 (2022), Jan. 104976
- Gao, M. Z., et al., Principle and Technology of Coring with In-situ Pressure and Gas Maintaining in Deep Coal Mine (in Chinese), Journal of China Coal Society, 46 (2021), 03, pp. 885-897
- Gao, M. Z., et al., In-situ Disturbed Mechanical Behavior of Deep Coal Rock (in Chinese), Journal of China Coal Society, 45 (2020), 8, pp. 2691-2703
- Zuo, J. P., et al., Study on Failure Behavior of Rock Under Coupling Effects of Temperature and Confining Pressure (in Chinese), Chinese Journal of Rock Mechanics and Engineering, 24 (2005), 16, pp. 2917-2921
- Gao, M. Z., et al., Characteristics and Mechanism of Rock 3D Volume Fracturing in Microwave Field (in Chinese), Journal of China Coal Society, 47 (2022), 3, pp. 1122-1137
- Gao, M. Z., et al., The Mechanism of Microwave Rock Breaking and Its Potential Application to Rock-Breaking Technology in Drilling, Petroleum Science, 19 (2022), 3, pp. 1110-1124
- Yang, M. Q., et al., On Distribution Characteristics of the Temperature Field and Gas Seepage Law of Coal in Deep Mining, Thermal Science, 24 (2020), 6B, pp. 3923-3931
- Rack, R., New Techniques in Sediment Core Analysis: An Introduction, Geological Society, 267 (2006), 1, pp. 1-29
- Abegg, F., et al., Development and Application of Pressure-Core-Sampling Systems for the Investigation of Gas- and Gas-Hydrate-Bearing Sediments, Deep-Sea Research Part I-Oceanographic Research Papers, 55 (2008), 11, pp. 1590-1599
- Zhu, H. Y., et al., Pressure and Temperature Preservation Techniques for Gas-Hydrate-Bearing Sediments Sampling, Energy, 36 (2011), 7, pp. 4542-4551
- Qin, H. W., et al., Pressure Tight Piston Corer - a New Approach on Gas Hydrate Investigation, China Ocean Engineering, 19 (2005), 1, pp. 121-128
- He, Z. Q., et al., The Optimization of Pressure Controller for Deep Earth Drilling, Thermal Science, 23 (2019), Suppl. 3, pp. S877-S885
- He, Z. Q., et al., Design and Verification of a Deep Rock Corer with Retaining the In Situ Temperature, Advances in Civil Engineering, 2020 (2020), ID8894286
- He, Z. Q., et al., Research on Properties of Hollow Glass Microspheres/Epoxy Resin Composites Applied in Deep Rock In-situ Temperature-Preserved Coring, Petroleum Science, 19 (2022), 2, pp. 720-730
- Xie, H. P., et al., Study on Concept and Progress of In Situ Fidelity Coring of Deep Rocks (in Chinese), Chinese Journal of Rock Mechanics and Engineering, 39 (2020), 5, pp. 865-876