ABSTRACT
Reasonable capacity configurations of distributed energy system are issues which need to be discussed. Determinate design without considering variations in energy load and energy prices can result in non-achievement of project targets during its service life. Therefore, a design method that takes into account uncertain factors takes precedence over other methods. In this paper, a three-stage optimization method is proposed to provide theoretical guidance on the optimization of combined cooling, heating, and power system configurations. The first two stages link the optimization of the operation strategy and equipment capacities simultaneously under current load and energy prices. The Monte-Carlo simulation is applied in the third stage to fully consider the effects of various possible scenarios, and the Tabu search algorithm was introduced for system optimization. The comprehensive benefits include energy consumption, economy, and emission level. These were taken into consideration in the objective function. Moreover, a detailed design process was presented to illustrate the application of the proposed method. In conclusion, the proposed method is not only suitable for the design of combined cooling, heating, and power system, but could easily extend to other energy system easily.
KEYWORDS
PAPER SUBMITTED: 2019-05-21
PAPER REVISED: 2019-08-13
PAPER ACCEPTED: 2019-09-05
PUBLISHED ONLINE: 2019-10-06
THERMAL SCIENCE YEAR
2021, VOLUME
25, ISSUE
Issue 1, PAGES [527 - 540]
- Pierluigi Mancarella, G.C., Real-time demand response from energy shifting in distributed multi-generation, IEEE TRANSACTIONS ON SMART GRID, 4. (2013), 4, pp. 1928 - 1938, DOI No. 10.1109/TSG.2013.2258413
- Li, L., et al., Optimization and analysis of CCHP system based on energy loads coupling of residential and office buildings, Applied Energy, 136. (2014), pp. 206-216, DOI No. 10.1016/j.apenergy.2014.09.020
- Ren, H., et al., Multi-objective optimization for the operation of distributed energy systems considering economic and environmental aspects, Applied Energy, 87. (2010), 12, pp. 3642-3651, DOI No. 10.1016/j.apenergy.2010.06.013
- Wu, Q., et al., Multi-criteria assessment of combined cooling, heating and power systems located in different regions in Japan, Applied Thermal Engineering, 73. (2014), 1, pp. 660-670, DOI No. 10.1016/j.applthermaleng.2014.08.020
- Wang, J., et al., Sensitivity analysis of optimal model on building cooling heating and power system, Applied Energy, 88. (2011), 12, pp. 5143-5152, DOI No. 10.1016/j.apenergy.2011.07.015
- Wang, J.-J., et al., Optimization of capacity and operation for CCHP system by genetic algorithm, Applied Energy, 87. (2010), 4, pp. 1325-1335, DOI No. 10.1016/j.apenergy.2009.08.005
- Mavromatidis, G., et al., Uncertainty and global sensitivity analysis for the optimal design of distributed energy systems, Applied Energy, 214. (2018), pp. 219-238, DOI No. 10.1016/j.apenergy.2018.01.062
- Pang, Z.,Z. O'Neill, Uncertainty quantification and sensitivity analysis of the domestic hot water usage in hotels, Applied Energy, 232. (2018), pp. 424-442, DOI No. 10.1016/j.apenergy.2018.09.221
- Fu, X., et al., Failure probability estimation of the gas supply using a data-driven model in an integrated energy system, Applied Energy, 232. (2018), pp. 704-714, DOI No. 10.1016/j.apenergy.2018.09.097
- Lv, J., et al., Planning energy-water nexus system under multiple uncertainties - A case study of Hebei province, Applied Energy, 229. (2018), pp. 389-403, DOI No. 10.1016/j.apenergy.2018.08.010
- Yu, L.,Y.P. Li, A flexible-possibilistic stochastic programming method for planning municipal-scale energy system through introducing renewable energies and electric vehicles, Journal of Cleaner Production, 207. (2019), pp. 772-787, DOI No. 10.1016/j.jclepro.2018.10.006
- data.stats.gov.cn/.
- Yan, D., et al., DeST — An integrated building simulation toolkit Part I: Fundamentals, Building Simulation, 1. (2008), 2, pp. 95-110, DOI No. 10.1007/s12273-008-8118-8
- Domínguez-Muñoz, F., et al., Design of solar thermal systems under uncertainty, Energy and Buildings, 47. (2012), pp. 474-484, DOI No. 10.1016/j.enbuild.2011.12.031
- Rout, A., et al., Risk modeling of domestic solar water heater using Monte Carlo simulation for east-coastal region of India, Energy, 145. (2018), pp. 548-556, DOI No. 10.1016/j.energy.2018.01.018
- Olaru, M., et al., Monte Carlo Method Application for Environmental Risks Impact Assessment in Investment Projects, Procedia - Social and Behavioral Sciences, 109. (2014), pp. 940-943, DOI No. 10.1016/j.sbspro.2013.12.568
- Chauhan, A.,R.P. Saini, Techno-economic optimization based approach for energy management of a stand-alone integrated renewable energy system for remote areas of India, Energy, 94. (2016), pp. 138-156, DOI No. 10.1016/j.energy.2015.10.136
- Fu, X., et al., Uncertainty analysis of an integrated energy system based on information theory, Energy, 122. (2017), pp. 649-662, DOI No. 10.1016/j.energy.2017.01.111
- Glover, F., Tabu search, in: Encyclopedia of Operations Research and Management Science, (Ed., Editor^Editors), Springer US: Boston, MA. 2001, pp. 821-827.