International Scientific Journal


The subject of this paper is modeling of an intake manifold of a four-stroke IC engine using contemporary software tools. Virtual 3D CAD model of an intake manifold was designed based on a real intake manifold of a four-stroke IC engine. Based on the CAD model a 3D CFD model of the intake manifold was created. The modeling has been done with the purpose of simulation of the air flow inside the intake manifold in order to monitor values of the internal pressure during several seconds of the engine operation in three different operating points. Also, an experiment was conducted, which included measurements of intake manifold pressure in the same engine operating points in the course of a time interval of approximately the same duration. The results of both the simulation and the experimental measurements have been shown in the paper proving that the created model was good enough for the intended purpose.
PAPER REVISED: 2019-02-05
PAPER ACCEPTED: 2019-02-17
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2020, VOLUME 24, ISSUE Issue 1, PAGES [127 - 136]
  1. Heywood, J., Internal Combustion Engine Fundamentals, McGraw-Hill Co., Singapore, 1988
  2. Dorić, J., Klinar, I., Realisation and analysis of a new thermodynamic cycle for internal combustion engine, Thermal Science, 15 (2011), 4, pp. 961-974
  3. Tomić M., Popović S., Miljić N., Petrović S., Cvetić M., Knežević D., Jovanović Z., A quick simplified approach to the evaluation of combustion rate from an internal combustion engine indicator diagram, Thermal Science, 12 (2008), 1, pp. 85-102
  4. Patil A. S., Halbe V. G., Vora K. C., A System Approach to Automotive Air Intake System Development, SAE Paper, (2005), pp. 287-299
  5. Chalet D., Chesse P., Analysis of Unsteady Flow Through a Throttle Valve Using CFD, Engineering Applications of Computational Fluid Mechanics, (2010), Vol. 4, No. 3, pp. 387-395
  6. D'Mello J., Siras O., Performance Analysis for 4-Cilinder Intake Manifold: An Experimental and Numerical Approach, International Engineering Research Journal (2015), pp. 917-922
  7. Holkar R., Sule-Patil Y., Pise S., Godase Y., Jagadale V., Numerical Simulation of Steady Flow through Engine Intake System Using CFD, Journal for Mechanical and Civil Engineering, Vol. 12, Issue 1, Ver. II (2015), pp. 30-45
  8. Sedlacek F., Skovajsa M., Optimization of an intake system using CFD numerical simulation, Proceedings in Manufacturing Systems, Vol. 11, Issue 2 (2016), pp. 71-76
  9. Kale S. C., Ganesan V., Investigation of the flow field in the various regions of intake manifold of a S.I. engine, Indian Journal of Engineering & Materials Sciences,(2004), Vol. 11, pp.85-92
  10. Hendricks E., Chevalier A., Jensen M., Sorenson S., Trumpy D., Asik J., Modelling of the Intake Manifold Filling Dynamics, SAE Technical Paper Series 960037, (1996)
  11. Deur J., Hrovat D., Petrić J., Šitum Ž., A Control-Oriented Polytropic Model of SI Engine Intake Manifold, ASME International Mechanical Engineering Congress, Washington D.C., (2003), IMECE2003-41086
  12. Mattarelli E., Valentini A., Simulation of a High Performance Turbocharged S.I. Engine, SAE Technical Paper Series 983048, (1998)
  13. Seshadri S., Design and CFD Analysis of The Intake Manifold for The Honda CBR250RR Engine, Master of Science in Mechanical Engineering, The University of Texas at Arlington, USA, 2015
  14. Jemni M., Kantchev G., Abid. M., Intake manifold design effect on air fuel mixing and flow for an LPG heavy duty engine, International Journal of Energy and Environment, (2012), Vol. 3, Issue 1, pp. 61-72
  15. Ribbens W., Understanding Automotive Electronics, Newnes, Boston London New York, 2003
  16. Pogorevc P., Kegl B., Intake system design procedure for engines with special requirements, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automotive Engineering, (2006), Vol. 220, Issue 2, pp. 241-252
  17. Taherkhani A.R, Computational fluid Dynamics based optimisation of emergency response vehicles, Ph.D. thesis, The University of Leeds, School of Mechanical Engineering, Leeds, UK, 2015.
  18. Ružić D., Improvement of thermal comfort in a passenger car by localized air distribution, Acta Technica Conviniensis - Bulletin of Engineering, 4 (2011), pp. 63-67
  19. Ružić D., Bikić S., An approach to the modelling of a virtual thermal manikin, Thermal Science, 18 (2014), 4, pp. 1413-1423
  20. Ferziger J.H., Perić M., Computational methods for fluid dynamics, Springer, Germany, 2002
  21. Holman J. P., Heat Transfer, 10th ed., McGraw-Hill, New York, 2010.
  22. Nikolić N., Razvoj metoda dijagnostike usisnog sistema motora sa unutrašnjim sagorevanjem (in Serbian), Ph.D. thesis, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia, 2015
  23. Phulpagar A., Gogel N., CFD Analysis of Air Intake System, International Journal on Theoretical and Applied Research in Mechanical Engineering, Vol. 4, Issue 2 (2015), pp.2319-3182

© 2023 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence