International Scientific Journal


In this study, theoretical investigation of two evaporator ejector refrigeration system was carried out based on energy and exergy analysis using R134a and low global warming potential refrigerants (namely R1234yf and R1234ze(E)). In order to perform the analyses, a simulation model was developed and then the influence of different parameters on the COP, COP increase rate and exergy destructions were discussed for each refrigerant. The model was validated with experi¬mental data for R134a and later used to predict the behavior with R1234yf and R1234ze(E). It was found that the highest exergy destruction occurs in the R1234yf system and the increase rate in the COP with respect to the conventional system by using ejector as an expansion device are 15% for R134a, about 17% for R1234yf and about 15% for R1234ze(E), respectively.
PAPER REVISED: 2017-02-17
PAPER ACCEPTED: 2017-03-03
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2018, VOLUME 22, ISSUE Issue 3, PAGES [1515 - 1524]
  1. Kyoto Protocol, Report of the Conference of the Parties, United Nations Framework Convention on Climate Change (UNFCCC), 1997.
  2. Regulation (EU) No 517/2014 of the European Parliament and of the Council on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006.
  3. Jarahnejad, M., New Low GWP Synthetic Refrigerants, Master of Science Thesis, KTH School of Industrial Engineering and Management Energy Technology, Sweden, 2012.
  4. Minor, M., Spatz, M., HFO-1234yf low GWP refrigerant update, International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, 2008, USA, Paper No. 2349,
  5. Reasor, P., Aute, V., Radermacher, R., Refrigerant R1234yf Performance Comparison Investigation, International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, USA, 2010Paper No. 1085.
  6. Lu, M.C., Tong, J.R., Wang, C.C., Investigation of the two-phase convective boiling of R-1234yf in a 3.9 mm diameter tube. Int. J. Heat. Mass Transf., 65(2013), pp. 65, 545-551.
  7. Longo, G.A., Zilio, C., Condensation of the low GWP refrigerant HFC1234yf inside a brazed plate heat exchanger. Int. J. Refrigeration, 36(2013), pp. 612-621.
  8. Mota-Babiloni, A., Navarro-Esbri, J., Moles, F., Cervera, A.B., Peris, B., Verdu, G., A review of refrigerant R1234ze(E) recent investigations, Appl. Therm. Eng., 95(2016), 95, 211-222.
  9. Yataganbaba, A., Kilicarslan, A., Kurtbas, I., Exergy analysis of R1234yf and R1234ze as R134a replacements in a two evaporator vapour compression refrigeration system, Int. J. Refrig., 60(2015pp. 26-37.
  10. Qi, Z., Performance improvement potentials of R1234yf mobile air conditioning system, Int. J. Refrig., 58(2015), pp. 35-40.
  11. Sarkar, J., Ejector enhanced vapor compression refrigeration and heat pump systems-a review, Renew Sustain Energy Rev., 16(2012), pp. 6647-59.
  12. Besagni, G., Mereu, R., Inzoli, F., Ejector refrigeration: A comprehensive review, Renew Sustain Energy Rev., 53(2016), pp. 373-407.
  13. Chen, J.Y., Jarall, S., Havtun, H., Palm, B., A review on versatile ejector applications in refrigeration systems, Renew Sustain Energy Rev., 49(2015), pp. 67-90.
  14. Besagni, G., Mereu, R., Di Leo, G., Inzoli, F., A study of working fluids for heat driven ejector refrigeration using lumped parameter models, Int. J. Refrig., 58(2015), pp. 154-171.
  15. Wang, X., Yu, J., Experimental investigation on two-phase driven ejector performance in a novel ejector enhanced refrigeration system, Energy Conversion and Management, 111(2016), pp. 391-400.
  16. Li, C., Li, Y.Z., Cai, W.J., Hu, Y., Chen, H.R., Yan, J., Analysis on performance characteristics of ejector with variable area-ratio for multi-evaporator refrigeration system based on experimental data. Appl. Therm. Eng., 68(2014), pp.125-32.
  17. Kutlu, Ç., Ünal, Ş., Erdinç, M.T.. Thermodynamic analysis of bi-evaporator ejector refrigeration cycle using R744 as natural refrigerant, Journal of Thermal Engineering,2( 2016), pp.735-740.
  18. Ünal, Ş., Yılmaz, T., Thermodynamic analysis of the two-phase ejector air conditioning system for buses. Appl. Therm. Eng., 79(2015), pp.108-16.
  19. Trott, A.R., Welch, T., Refrigeration and Air-conditioning, third ed., Butter-worth-Heinemann, Oxford, UK, 2000.
  20. Dincer, I., Rosen, M.A., Exergy, energy, environment and sustainable development, 1st Ed., Elsevier, Oxford, U.K, 2007.
  21. Zhao, H., Zhang, K., Wang, L., Han, J.i Thermodynamic investigation of a booster-assisted ejector refrigeration system, Appl. Therm. Eng., 104(2016), pp. 274-281.
  22. Yan, G., Chen, J., Yu, J., Energy and exergy analysis of a new ejector enhanced auto-cascade refrigeration cycle, Energy Conversion and Management, 105(2015), pp. 509-517.
  23. Fazelpour, F., Energetic and exergetic analyses of carbon dioxide transcritical refrigeration systems for hot climates, Thermal science, 19(2015), pp. 905-914.
  24. Dai, Y., Wang, J., Gao, L., Exergy analysis, parametric analysis and optimization for a novel combined power and ejector refrigeration cycle. Appl. Therm. Eng., 29(2009), pp. 1983-90.
  25. Cihan, E., Kavasoğulları, B., Energy and exergy analysis of a combined refrigeration and waste heat driven organic rankine cycle system, Thermal Science, (2016), Doi:10.2298/TSCI150324002C.
  26. Klein, S.A., Engineering Equation Solver Academic Commercial V9, F-Chart Software, 2015.
  27. Climatic Design Information, ASHRAE Handbook, fundamentals, Atlanta, USA, 2001.
  28. Liu, F., Groll, E.A., Study of ejector efficiencies in refrigeration cycles, Appl.Therm. Eng., 52(2013), pp. 360-370.
  29. Ünal, Ş., Determination of the ejector dimensions of a bus air-conditioning system using analytical and numerical methods, Appl.Therm. Eng., 90(2015), pp.110-119.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence