THERMAL SCIENCE
International Scientific Journal
A NUMERICAL STUDY OF THE EFFECTS OF INJECTION RATE SHAPE ON COMBUSTION AND EMISSION OF DIESEL ENGINES
ABSTRACT
The spray characteristics including spray droplet sizes, droplet distribution, spray tip penetration length and spray diffusion angle directly affects the mixture process of fuel and oxygen and then plays an important role for the improvement of combustion and emission performance of diesel engines. Different injection rate shapes may induce different spray characteristics and then further affect the subsequent combustion and emission performance of diesel engines. In this paper, the spray and combustion processes based on four different injection rate shapes with constant injection duration and injected fuel mass were simulated in the software of AVL FIRE. The numerical models were validated through comparing the results from the simulation with those from experiment. It was found that the dynamic of diesel engines with the new proposed hump shape of injection rate and the original saddle shape is better than that with the injection rate of rectangle and triangle shape, but the emission of NOX is higher. And the soot emission is lowest during the late injection period for the new hump-shape injection rate because of a higher oxidation rate with a better mixture between fuel and air under the high injection pressure.
KEYWORDS
PAPER SUBMITTED: 2013-08-10
PAPER REVISED: 2013-10-22
PAPER ACCEPTED: 2013-12-27
PUBLISHED ONLINE: 2014-02-09
THERMAL SCIENCE YEAR
2014, VOLUME
18, ISSUE
Issue 1, PAGES [67 - 78]
- Zhou Longbao. The Internal Combustion Engine
- Masahiko Miyak, Hideya Fujisawa, Akira Masuda, et al, Development of new electronically controlled fuel injection system ECD-U2 for diesel engines
- Katsunori Furuta, Shinobu Sasaki, Michihiro Tokuda. Study of the in-line pump system for diesel engines to meet future emission regulations
- Zhang Xiaobin. Tubocharged Diesel Engine Thermodynamic System Working Process Simulation
- L.Dambrosio, G.Pascazio, S.De Robertis, and Fortunato. VGT Turbocharger controlled by means of an Adaptive Control Technique. 2001 IEEE/ASME International Conference On Advanced Intelligent Mechatronics Proceedings
- MoriK. Worldwide Trands in Heavy-Duty Diesel Engine Exhaust Emission Legislation and Compliance Technologies
- B.Terry and P Richards. A Method for Assessing the Low Temperature Regeneration Performance of Diesel Particulate Filters and Fuel-borne Catalysts
- Badami M, Millo F., Mallamo F, Influence of multiple injection strategies on emissions, combustion noise and BSFC of DI common-rail diesel engine
- Hyun Kyu Suh, Investigations of multiple injection strategies for the improvement of combustion and exhaust emissions characteristics in a low compression ratio (CR) engine
- Cenk Sayin , Murat Ilhan , Mustafa Canakci, Effect of injection timing on the exhaust emissions of a diesel engine using diesel-methanol blends
- Avinash Kumar Agarwal ,Dhananjay Kumar Srivastava, Atul Dhar, Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine
- J.M. Desantes, J. Benajes, S.Molina, C.A. González, The modification of the fuel injection rate in heavy-duty diesel engines. Part 1: Effects on engine performance and emissions
- J.M. Desantes, J. Benajes, S.Molina, C.A. González, The modification of the fuel injection rate in heavy-duty diesel engines Part 2: Effects on combustion
- Shijin Shuai, Neerav Abani, Takeshi Yoshikawa, Rolf D. Reitz, Sung Wook Park, Evaluation of the effects of injection timing and rate-shape on diesel low temperature combustion using advanced CFD modeling
- Vivak Luckhchoura, Modeling of Injection-Rate Shaping in Diesel Engine Combustion
- S. K. Aggarwal, A Computational Study on the Effects of Pre-Ignition Processes on Diesel Engine Combustion and Emissions,8th Thermal Engineering Joint Conference,March 13-17, 2011
- AVL Fire version 2011_main program. October 2011
- AVL Fire Product Description _Turbulence modeling. 2011
- AVL Fire version 2011 _Lagrangian Multiphase Module .October 2011
- Reitz, R.D. and Diwakar, J, Effect of Drop Break-up on Fuel Sprays, SAE 860469
- AVL Fire version 2011_ Combustion / Emission Module .October 2011
- Agafonov G. L., Nullmeier M., Vlasov P. A., Warnatz J. and Zaslonko I. S. (2002) Kinetic Modeling of Solid Carbon Particle Formation and Thermal Decomposition during Carbon Suboxide Pyrolysis behind Shock Waves
- Appel, J., Bockhorn, H. and Frenklach, M. (2000) Kinetic Modeling of Soot Formation with Detailed Chemistry and Physics: Laminar Premixed Flames of C2 Hydrocarbons
- Evlampiev A.V., Frolov S.M., Basevich V.Ya., Belyaev A.A. (2001) Chemical Physics Reports, Vol. 20, No. 1, p. 21-27.
- Kiefer, J. H., Sidhu, S. S., Kern, R. D., Xie, K, Chen, H. and Harding, L. B. (1992) The Homogeneous Pyrolysis of Acetylene II: The High Temperature Radical Chain Mechanism
- Krestinin, A. V. (2000) Detailed Modeling of Soot Formation in Hydrocarbon Pyrolysis
- Wagner, H.Gg. and Haynes, B.S. "Soot Formation." Prog
- Wagner, H. Gg., Vlasov, P. A., Dörge, K. J., Eremin, A. V., Zaslonko, I. S. and Tanke, D. (2001) The Kinetics of Carbon Cluster Formation during C3O2 Pyrolysis
- WANG Hui, SU Wan-hua, Liu Bin, Lin Tiejian, A Study of Realization of Modulated Multi-Pulse Injection Mode and Its Effects on HCCI Combustion, Trans actions of CSICE
- He Xueliang, The Determination Methods of the Start and End Point of Combustion in Diesel Engine
- WEI Haiqiao, SHU Gequn, WANG Yangjun, Yang Zhiyi, Effect of Transient Conditions on Combustion Noise of Internal Combustion Engines
- WEI Haiqiao, Stimulation Mechanism of Combustion noise in Transient Condition of DI-Diesel Engine
