## THERMAL SCIENCE

International Scientific Journal

### CREEP TRANSITION STRESSES IN A THIN ROTATING DISC WITH SHAFT BY FINITE DEFORMATION UNDER STEADY-STATE TEMPERATURE

**ABSTRACT**

Creep stresses and strain rates have been derived for a thin rotating disc with shaft at different temperature. Results have been discussed and presented graphically. It has been observed that radial stress has maximum value at the internal surface of the rotating disc made of incompressible material as compared to circumferential stress and this value of radial stress further increase with the increase of angular speed. With the introduction of thermal effect, it has been observed that radial stress has higher maximum value at the internal surface of the rotating disc made of incompressible material as compared to circumferential stress, and this value of radial stress further increases with the increase of angular speed as compared to the case without thermal effect. Strain rates have maximum values at the internal surface for compressible material. Rotating disc is likely to fracture by cleavage close to the inclusion at the bore.

**KEYWORDS**

PAPER SUBMITTED: 2009-06-26

PAPER REVISED: 2010-01-04

PAPER ACCEPTED: 2010-01-08

**THERMAL SCIENCE** YEAR

**2010**, VOLUME

**14**, ISSUE

**Issue 2**, PAGES [425 - 436]

- Boyle, J. T., Spence, J., Stress Analysis for Creep, Butterworths Co., London, 1983
- Kraus, H., Creep Analysis, John Wiley & Sons, New York, USA, 1980
- Lubhan, D., Felger R. P., Plasticity and Creep of Metals, John Wiley & Sons, New York, USA, 1961
- Nabarro, F. R. N., Villiers H. L., de, Physics of Creep, Taylor & Francis, London, 1995
- Odqvist, F. K.G., Mathematical Theory of Creep and Creep Rupture, Clarendon Press, Oxford, UK, 1974
- Penny, R. K., Mariott, D. L., Design for Creep Chapman and Hall, London, 1995
- Wahl, A. M., Analysis of Creep in Rotating Discs Based on Tresca Criterion and Associated Flow Rule, Jr. Appl. Mech., 23 (1956), 2, pp. 103-106
- Seth, B. R., Transition Theory of Elastic-Plastic Deformation, Creep and Relaxation, Nature, 195 (1962), pp. 896-897
- Seth, B. R., Measure Concept in Mechanics, Int. J. Non-linear Mech., 1 (1966), 1, pp. 35-40
- Parkus, H., Thermo-Elasticity, Springer-Verlag, New York, USA, 1976
- Seth, B. R., Creep Rupture, IUTAM Symposium on Creep in Structures, Gothenberg, 1970, pp. 167-169
- Seth, B. R., Creep Transition, J. Math. Phys. Sci., 6 (1972), 1, pp. 1-5
- Seth, B. R., Creep Transition in Rotating Cylinder, J. Math. Phys. Sci., 8 (1974), 1, pp. 1-5
- Gupta, S. K., Dharmani, R. L., Creep Transition in Rotating Cylinders, Int. J. Pure Applied Math., 15 (1981), 6, pp. 525-536
- Gupta, S. K., Creep Transition in Bending of Rectangular Plates, Proceedings, International Symposium on Non-Linear Mech., Kharagpur, India, 1980, pp. 169-175
- Gupta, S. K., Rana, V. D., Thermo Elastic-Plastic and Creep Transition in Rotating Cylinder, J. Math. Phy. Sci., 23 (1989), 1, pp. 71-90
- Gupta, S. K., Dharmani, R. L., Creep Transition in Thick Walled Cylinder under Internal Pressure, Z.A.M.M. Mech., 59 (1979), 2, pp. 517- 521
- Gupta , S. K., Sonia, T. P., Creep Transition in a thin Rotating Disc of Variable Density, Defence Sci. Journal, India, 50 (2000), 2, pp. 147-153
- Gupta, S. K., Sharma, S., Proceeding, 3rd International Congress on Thermal Stresses, Cracow, Poland, 1999 , pp. 345-348
- Gupta, S. K., Pankaj, T., Creep Transition in a Thin Rotating Disc with Rigid Inclusion, Defence Science Journal, India, 57 (2007), 2, pp. 185-195
- Sokolnikoff, I. S., Mathematical Theory of Elasticity, 2nd ed., New York, USA,1952, pp. 65-79
- Levitsky, M., Shaffer, B. W., Residual Thermal Stresses in a Solid Sphere form a Thermosetting Material, Jr. of Appl. Mech., Trans. of ASME, 42 (1975), 3, pp. 651-655