THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

online first only

Modeling of pulverized coal combustion for in-furnace NOx reduction and flame control

ABSTRACT
A cost-effective reduction of NOx emission from utility boilers firing pulverized coal can be achieved by means of combustion modifications in the furnace. It is also essential to provide the pulverized coal diffusion flame control. Mathematical modeling is regularly used for analysis and optimization of complex turbulent reactive flows and mutually dependent processes in coal combustion furnaces. In the numerical study, predictions were performed by an in-house developed comprehensive three-dimensional differential model of flow, combustion and heat/mass transfer with submodel of the fuel- and thermal-NO formation/destruction reactions. Influence of various operating conditions in the case-study utility boiler tangentially fired furnace, such as distribution of both the fuel and the combustion air over the burners and tiers, fuel-bound nitrogen content and grinding fineness of coal were investigated individually and in combination. Mechanisms of NO formation and depletion were found to be strongly affected by flow, temperature and gas mixture components concentration fields. Proper modifications of combustion process can provide more than 30% of the NOx emission abatement, approaching the corresponding emission limits, with simultaneous control of the flame geometry and position within the furnace. This kind of complex numerical experiments provides conditions for improvements of the power plant furnaces exploitation, with respect to high efficiency, operation flexibility and low emission.
KEYWORDS
PAPER SUBMITTED: 2016-06-04
PAPER REVISED: 2016-06-08
PAPER ACCEPTED: 2016-06-08
PUBLISHED ONLINE: 2016-08-07
DOI REFERENCE: https://doi.org/10.2298/TSCI160604186B
REFERENCES
  1. Shi, L., et al., Influence of Combustion System Retrofit on NOx Formation Characteristics in a 300 MW Tangentially Fired Furnace, Appl Therm Eng, 98 (2016), Supp C pp. 766-777
  2. Askarova, A. S., et al., Reduction of Noxious Substance Emissions at the Pulverized Fuel Combustion in the Combustor of the BKZ-160 Boiler of the Almaty eat Electropower Station Using the " verfire Air" Technology, Thermophys Aeromech+, 23 (2016), pp. 125-134
  3. Belošević, S., et al., umerical Study of Pulverized Coal-Fired Utility Boiler over a Wide Range of Operating Conditions for In-Furnace SO2/NOx Reduction, Appl Therm Eng, 94 (2016), pp. 657-669
  4. Constenla, I., et al., Numerical Study of a 350 MWe Tangentially Fired Pulverized Coal Furnace of the As Pontes Power Plant, Fuel Process Technol, 116 (2013), pp. 189-200
  5. Wang Z., et al., Numerical Study on the Stereo-Staged Combustion Properties of a 600 MWe Tangentially Fired Boiler, in: Cleaner Combustion and Sustainable World (Eds. H. Qi, B. Zhao), Springer-Verlag Berlin Heidelberg and Tsinghua University Press, 2013, pp. 1141-1152
  6. Yue-yun S., et al., Numerical Study on the Impact of Varying Operation Conditions on NOx Emissions of Large-Scale Pulverized Coal-Fired Utility Boiler, in: Cleaner Combustion and Sustainable World (Eds. H. Qi, B. Zhao), Springer-Verlag Berlin Heidelberg and Tsinghua University Press, 2013, pp. 1109-1120
  7. Belosevic, S., et al., Numerical Analysis of NOx Control by Combustion Modifications in Pulverized Coal Utility Boiler, Energ Fuel, 26 (2012), 1, pp. 425-442
  8. Zhou, H., et al., Numerical Simulation of the NOx Emissions in a 1000 MW Tangentially Fired Pulverized-Coal Boiler: Influence of the Multi-Group Arrangement of the Separated over Fire Air, Energ Fuel, 25 (2011), pp. 2004-2012
  9. Fan, W., et al., Experimental Flow Field Characteristics of OFA for Large-Angle Counter Flow of Fuel-Rich Jet Combustion Technology, Appl Energ, 87 (2010), pp. 2737-2745
  10. Khalilarya, Sh., Lotfiani, A., Determination of Flow Pattern and its Effect on NOx Emission in a Tangentially Fired Single Chamber Square Furnace, Therm Sci, 14 (2010), 2, pp. 493-503
  11. Filkoski, R., et al., Optimisation of Pulverized Coal Combustion by Means of CFD/CTA Modelling, Therm Sci, 10 (2006), pp. 161-179
  12. Liu, H., et al., Effects of Air Staging Conditions on the Combustion and NOx Emission Characteristics in a 600 MW Wall Fired Utility Boiler Using Lean Coal , Energ Fuel, 27 (2013), pp. 5831-5840
  13. Vascellary M., Cau G., Influence of Turbulence-Chemical Interaction on CFD Pulverized Coal MILD Combustion Modeling, Fuel, 101 (2012), pp. 90-101
  14. McAdams, J. D., Minimize NOx Emissions Cost-Effectively, Hydrocarb Process, 80 (2001), 6, pp. 51-58
  15. Hill, S. C., Smoot, L. D., Modeling of Nitrogen Oxides Formation and Destruction in Combustion Systems, Prog Energ Combust, 26 (2000), 4-6, pp. 417-458
  16. Lockwood, F. C., Romo-Millares, C. A., Mathematical Modeling of Fuel NO Emissions From PF Burners, J I Energy, 65 (1992), pp. 144-152
  17. Smoot, L. D., Smith, P. J., Coal Combustion and Gasification, Plenum Press, New York, 1985
  18. Yang, M., et al., Numerical Investigation of the Nonlinear Flow Characteristics in an Ultra-Supercritical Utility Boiler Furnace, Appl Therm Eng, 88 (2015), pp. 237-247
  19. Al-Abbas, A. H., et al., Numerical Simulation of Brown Coal Combustion in a 550 MW Tangentially Fired Furnace under Different Operating Conditions, Fuel, 107 (2013), pp. 688-698
  20. Lotfiani A., Khalilarya S., Extended Semi-Analytical Model for the Prediction of Flow and Concentration Fields in a Tangentially-Fired Furnace, Therm Sci, 17 (2013), pp. 1233-1243
  21. Belosevic, S., et al., Numerical Prediction of Pulverized Coal Flame in Utility Boiler Furnaces, Energ Fuel, 23 (2009), 11, pp. 5401-5412
  22. Belosevic, S., et al., Numerical Study of a Utility Boiler Tangentially-Fired Furnace under Different Operating Conditions, Fuel, 87 (2008), 15-16, pp. 3331-3338
  23. Belošević, S., et al., Three-Dimensional Modeling of Utility Boiler Pulverized Coal Tangentially Fired Furnace, Int J Heat Mass Tran, 49 (2006), 19-20, pp. 3371-3378
  24. Subramaniam, S., Lagrangian-Eulerian Methods for Multiphase flows, Prog Energ Combust, 39 (2013), pp. 215-245
  25. Mando, M., et al., Turbulence Modulation in Dilute Particle-Laden flow, Int J Heat Mass Tran, 30 (2009), pp. 331-338
  26. Elghobashi S., An Updated Classification Map of Particle-Laden Turbulent Flows, in: Proceedings of the IUTAM Symposium on Computational Multiphase Flow (Eds. S. Balachandar, A. Prosperetti), Springer: Printed in the Netherlands, 2006, pp. 3-10
  27. Blokh, A. G., Thermal Radiation of a Pulverized-Coal Flame, in: Heat Transfer in Steam Boiler Furnaces, Hemisphere Publishing, New York, 1988, pp. 85-124
  28. Crnomarković, ., et al., umerical Determination of the Impact of the Ash Deposit on the Furnace Walls to the Radiative Heat Exchange Inside the Pulverized Coal Fired Furnace, Proceedings, International Conference Power Plants 2014, Zlatibor, Serbia, 28-31. October 2014, ISBN 978-86-7877-024-1, pp. 679-690
  29. Belošević, S., et al., A umerical Study of Pulverized Coal Ignition by means of Plasma Torches in Air-Coal Dust Mixture Ducts of Utility Boiler Furnaces, Int J Heat Mass Tran, 51 (2008), 7-8, pp. 1978-1978
  30. Solomon, P. R., Colket, M. B., Evolution of Fuel Nitrogen in Coal Devolatilisation, Fuel, 57 (1978), 12, pp. 749-755
  31. De Soete, G. G., Overall Reaction Rates of NO and N2 Formation from Fuel Nitrogen, P Combust Inst, 15 (1975), 1, pp. 1093-1102
  32. De Soete, G. G., Heterogeneous N2O and NO Formation from Bound Nitrogen Atoms during Coal Char Combustion, P Combust Inst, 23 (1991), 1, pp. 1257-1264
  33. Stojiljković, D., Nitrogen Oxides During Combustion of Domestic Lignites, Andrejević Foundation, Belgrade, 2001 (in Serbian)
  34. El-Mahallawy F., Habik S., Fundamentals and Technology of Combustion, Elsevier Science Ltd, Oxford, UK, 2002