THERMAL SCIENCE

International Scientific Journal

External Links

TEMPERATURE DEPENDENCE OF YOUNG’S MODULUS OF RED SANDSTONE

ABSTRACT
In the underground rock diagenetic process, or artificial excavation in rock engineering, it is possible to make experience in the high temperature. The temperature dependence of Young’s modulus of red sandstone was characterized by impulse excitation technology. It is shown that after heating-cooling cycle the Young’s modulus of red sandstone decreases down to about 90% from the room temperature up to 800°C of its initial value. The significant change of Young’s modulus with temperature is attributed to thermal-induced damages in red sandstone, including the rock composition variation, mass loss, mineral phase composition change, porosity increasing, grain trans-granular, micro-cracks penetrated and disruption.
KEYWORDS
PAPER SUBMITTED: 2018-08-22
PAPER REVISED: 2018-11-20
PAPER ACCEPTED: 2019-01-05
PUBLISHED ONLINE: 2019-05-26
DOI REFERENCE: https://doi.org/10.2298/TSCI180822229L
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2019, VOLUME 23, ISSUE 3, PAGES [1599 - 1606]
REFERENCES
  1. Zhao, Y.S., Rock Mechanics Problems in Geothermal Exploitation of Hot Dry Rocks. In: The 6th academy conference of Chinese rock mechanics and engineering, Wuhan Science & Technology Press, 2000, pp. 361-364
  2. Zhan, F., et al., Influence of High Temperature on Anchoring System of Cable Bolts at Stope Hangingwall, Journal of Liaoning Technology University, 26 (2007), pp . 524-526
  3. Class, H., et al., A Benchmark Study on Problems Related to CO2 Storage in Geologic Formations, Computers & Geosciences, 13 (2009), pp. 409-434
  4. Sundberg, J., et al., Modelling of Thermal Rock Mass Properties at the Potential Sites of a Swedish Nuclear Waste Repository, International Journal of Rock Mechanics and Mining Sciences, 46 (2009), pp. 1042-1054
  5. Roddy, D.J., et al., Underground Coal Gasification with CCS: a Pathway to Decarbonising Industry, Energy & Environmental Science, 3 (2010), pp. 400-407
  6. Gischig, V.S., Natural Hazards Cracking Cliffs Feel the Heat, Nature Geosciences, 9 (2016), pp. 344-345
  7. Collins, B.D., et al., Rockfall Triggering by Cyclic Thermal Stressing of Exfoliation Fractures, Nature Geosciences, 9 (2016), pp. 395-400
  8. Fredrich, J.T., et al., Micromechanics of Thermally Induced Cracking in Three Crustal Rocks, Journal of Geophysical Research, 91 (1986), pp. 12743-12764
  9. Homand-Etienne, F., et al., Thermally Induced Microcracking in Granites: Characterization and Analysis, International Journal of Rock Mechanics&mining Sciences & Geomechanics Abstracts, 26 (1989), Feb., pp. 125-134
  10. Ferrero, A.M., et al., Experimental Studies on the Mechanical Behaviour of Two Thermal Cracked Marbles, Rock Mechanics and Rock Engineering, 34 (2001), pp. 57-66
  11. Zhang, Y., et al., Process of Sandstone Thermal Cracking, Chinese Journal of geophysics, 48 (2005), March., pp. 722-726
  12. Zhao, H.B., et al., Experimental Study on Effect of Temperature on Sandstone Damage, Chinese Journal of rock mechanics and engineering, 28 (2009), pp. 2784-2788
  13. Zuo, J.P., et al., SEM in Situ Investigation on Thermal Cracking Behaviour of Pingdingshan Sandstone at Elevated Temperatures, Geophysical Journal International, 181 (2010), pp. 593-603
  14. Ranjith, P.G., et al., Transformation Plasticity and the Effect of Temperature on the Mechanical Behaviour of Hawkesbury Sandstone at Atmospheric Pressure, Engineering Geology, 151 (2012), pp. 120-127
  15. Tian, H., et al., Physical Properties of Sandstones after High Temperature Treatment, Rock Mechanics and Rock Engineering, 45 (2012), pp. 1113-1117

© 2019 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence