THERMAL SCIENCE

International Scientific Journal

MODELING OF THE BUCKSTAY SYSTEM OF MEMBRANE-WALLS IN WATERTUBE BOILER CONSTRUCTION

ABSTRACT
Membrane walls are very important structural parts of water-tube boiler construction. Based on their specific geometry, one special type of finite element was defined to help model the global boiler construction. That is the element of reduced orthotropic plate with two thicknesses and two elasticity matrixes, for membrane and bending load separately. A global model of the boiler construction showed that the high value of stress is concentrated in plates of the buckstay system in boiler corners. Validation of the new finite element was done on the local model of the part of membrane wall and buckstay. A very precise model of tubes and flanges was compared to the model formed on the element of a reduced orthotropic plate. Pressure and thermal loads were discussed. Obtained results indicated that the defined finite element was quite favorable in the design and reconstruction of the boiler substructures such as a buckstay system. [Projekat Ministarstva nauke Republike Srbije, br. TR 35040 i br. TR 35011]
KEYWORDS
PAPER SUBMITTED: 2013-02-04
PAPER REVISED: 2013-07-27
PAPER ACCEPTED: 2013-11-12
PUBLISHED ONLINE: 2014-07-06
DOI REFERENCE: https://doi.org/10.2298/TSCI120204174N
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2014, VOLUME 18, ISSUE Supplement 1, PAGES [S59 - S72]
REFERENCES
  1. Taljat, B., Zacharia, T., Wang, L., Keiser, J. R., Swindeman, R. W., Hubbard, C. R., Mechanical design of steel tubing for use in black liquor recovery boiler: a look at how finite element analy-sis methods can evaluate stress conditions, Pulp & Paper (Canada), 100 (1999), 10, pp. 34-38
  2. Mac Lean, K., Fournier, E., Gomez-Grande, J., Scandroli, T., The "World´s Largest" Inconel Waterwall Weld Overlay, Power Engineering (Barrington), 113 (2010), 11, pp. 174
  3. Šijaèki Žeravèić, V., Bakić, G., Ðukić, M., Andjelić, B., Analysis of test results of hot-water boiler as a basic for its integrity assessment, Structural Integrity and Life, 7 (2007), 2, pp.133-140
  4. Othman, H., Purbolaksono, J., Ahmad, B., Failure Investigation on Deformed Superheater Tubes, Engineering Failure Analysis, 16 (2009), 1, pp. 329-339
  5. Caligiuri, R., Foulds, J., Sire, R., Andrew S., Thermal Constraint Conside-ration in Design of a Heat Recovery Boiler, Engineering Failure Analysis, 13 (2006), 8, pp. 1388-1396
  6. Gaćeša, B., Milošević-Mitić, V., Maneski, T., Kozak, D., Sertic, J., Numerical and Experimental Strength Analysis of Fire-Tube Boiler Construction, Technical Gazette, 18 (2011), 2, pp. 237-242
  7. Arsić, M., Aleksić, V., Hut, N., Analysis of state and integrity assessment of boilers - Structural performance diagnostics, Structural Integrity and Life, 5 (2005), 1, pp. 3-17
  8. Mitrović, R., Momèilović, D., Erić, O., Atanasovska, I., Hut, N., Study on Impact properties of Creep-Resistant Steel Thermally Simulated Heat Affected Zone, Thermal Science, 16 (2012), 2, pp. 513-525
  9. Kalaba, D., Sedmak, A., Radaković, Z., Miloš, M., Thermomechanical modeling of the resistance welding of PbSb Alloy, Thermal Science, 14 (2010), 2, pp. 437-450
  10. Gaćeša, B., Maneski, T., Milošević-Mitić, V., Condition and Behavior Diagnostics of Boiler Constructions, FME Transactions, 40 (2012), 2, pp. 87-92
  11. Mijuca, D., Žiberna, A., Medjo, B., A new multifield finite element method in steady state heat analysis, Thermal Science, 9 (2009), 1, pp. 111-130
  12. Maneski, T., Milosevic-Mitic, V., Gacesa, B., Problems in the Modeling of Steam Boilers, Proceedings (Šumarac, Kuzmanović),1st Int. Cong. of Serbian Soc. of Mech. 2007, pp. 451-456
  13. Tomić, R., Sedmak, A., ćatić, D., Miloš, M., Stefanović, Z., Thermal stress analysis of a fiber-epoxy composite material, Thermal Science, 15 (2011), 2, pp. 559-563
  14. Gipson, R.F., Principles of Composite Material Mechanics, McGraw-Hill Companies, New York, 1994
  15. Maneski, T., Computer modeling and calculation of structures, Faculty of Mechanical Engineering, Belgrade, Serbia, 1998
  16. Maneski, T., Milošević-Mitić, V., Numerical and experimental diagnostics of structural strength, Structural Integrity and Life, 10 (2010), 1, pp. 3-10
  17. Gaćeša, B., Numerical and experimental strength analysis of boiler constructions (in Serbian), Ph. D. Thesis, Faculty of Mechanical Engineering, University of Belgrade, Serbia, 2011
  18. Milošević-Mitić, V., Gaćeša, B., Andjelić, N., Maneski, T., Numerical calculation of the water tube boiler using finite element of the orthotropic plate, Structural Integrity and Life, 12 (2012), 3, pp. 185-190
  19. Gulić, M., Brkić, Lj., Perunović, P., Steam boilers (in Serbian), Faculty of Mechanical Engineering, Belgrade, Serbia, 1988

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence