ABSTRACT
Flow separation is necessary for the construction of a rocket engine nozzle. Regenerative cooling is one of the most significant criteria for the safety of wall nozzles because of the high temperature and pressure in the thrust chamber. A review of a comprehensive numerical investigation of the boundary layer separation and heat transfer in a 30°−15° cooled nozzle is presented. The accuracy of the SST-V turbulence model in this study was numerically investigated. For this purpose and for a wide range of chamber conditions, the effects of various parameters, such as wall temperature, turbulent Prandtl number, and constant specific heat ratio vary from 1.31 to 1.4 for constant fluid properties for N2O, CH4, Cl2, and air, respectively. The variable specific heat ratio ranged from 1.39 to 1.66 for variable fluid properties for air, CH4, O2 and Helium, respectively, and we investigated how various parameters impact the position of flow separation and local wall heat transfer.
KEYWORDS
PAPER SUBMITTED: 2023-05-13
PAPER REVISED: 2023-07-30
PAPER ACCEPTED: 2023-08-05
PUBLISHED ONLINE: 2024-04-13
- Saunders, O.A. and Calder, P.H., Heat Transfer in a Nozzle at Supersonic Speeds. Proceedings of the Institution of Mechanical Engineers, Part B: Management and engineering manufacture, 1(1953), 1-12, pp. 232-239. doi.org/10.1177/002034835316701b16
- Ragsdale, W.C and Smith J.M, Heat transfer in nozzles," Chemical Engineering Science, 11(1959), 4, pp. 242-251, 0009-2509. doi.org/10.1016/S0009-2509(15)30003-8
- Baron, J.R. and Durgin, F.H., An experimental investigation of heat transfer at the boundaries of supersonic nozzles," WADC TR 54-541,1954, NavalSupersonic Laboratory, Mas- sachusetts institute of technology, WADC Technical Report 54-541
- Kolozsi, J.J., An Investigation of Heat Transfer through the Turbulent Boundary Layer in an Axially Symmetric, Convergent-Divergent Nozzle," MS Thesis, Ohio State University, Columbus, OH, 1958
- Back, L.H., Massier, P.F. and Gier, H.L., Convective Heat Transfer in a Convergent- Divergent Nozzle," Int. J. Heat Mass Transfer, 7(1964), pp. 549-568. doi.org/10.1016/0017-9310(64)90052-3
- Leccese, G., Bianchi, D., Betti, B., Lentini, D. and Nasuti, F., Convective and Radiative Wall Heat Transfer in Liquid Rocket Thrust Chambers, Journal of Propulsion and Power, 34(2018), 2, pp. 318-326. doi.org/10.2514/1.B36589
- Arnold, R., Suslov, D. and Haidn O.J., Inuence Parameters on Film Cooling Effectiveness in a High Pressure Subscale Combustion Chamber, 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition. Orlando, Florida, 2009. doi.org/10.2514/6.2009-453
- Miranda, A. and Naraghi, M., Analysis of Film Cooling and Heat Trans- fer in Rocket Thrust Chamber and Nozzle," 49th AIAA Aerospace Sciences Meet- ing including the New Horizons Forum and Aerospace Exposition. Orlando, Florida, 2011. doi.org/10.2514/6.2011-712
- Kurtbas, I., The effect of different inlet conditions of air in a rectangular channel on convection heat transfer: Turbulence flow" Experimental Thermal and Fluid Science, 33(2008), I1, pp. 140-152, 0894-1777. doi.org/10.1016/j.expthermflusci.2008.07.012
- Betti, B., Bianchi, D., Nasuti, F. and Martelli, E., Chemical Reaction Effects on Wall Heat Flux in Liquid Rocket Thrust Chambers, 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference Cleveland, OH, 2014. doi.org/10.2514/6.2014-3675
- Kim, J.G., Lee, J.W. and Kim, K.H., Investigation on the Characteristics of Plume- Induced Flow Separation and Wall Heat Transfer, Journal of Spacecraft and Rockets, 49(2012), 1, pp. 189-192. doi.org/10.2514/1.51782
- Daimon, Y., Negishi, H., Yamanishi, N., Nunome, Y., Sasaki, M. and Tomita, T., Combustion and Heat Transfer Modeling in Regeneratively Cooled Thrust Chambers (Optimal Solution Procedures for Heat Flux Estimation of a Full- Scale Thrust Chamber), 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Joint Propulsion Conferences, 2012. DOI:10.2514/6.2012-4009
- Frank, G. and Pfitzner, M., Investigation of the heat transfer coefficient in a tran- spiration film cooling with chemical reactions, International Journal of Heat and Mass Transfer, 113(2017), pp. 755-763, 0017-9310. doi.org/10.1016/j.ijheatmasstransfer.2017.05.103
- Xiao, X., Hassan, H.A. and Edwards, J.R., Role of Turbulent Prandtl Numbers on Heat flux at Hypersonic Mach Numbers, AIAA, 45(2007), 4, pp. 806-813. doi.org/10.2514/1.21447
- Sommer, T.P., So, R.M.C. and Zhang, H.S., A Near Wall Variable Turbulent- Prandtl-Number Turbulence Model For Compressible Flows, AIAA, 31(1993), 1, pp. 27-35. doi.org/10.2514/3.11314
- Vieser, W., Esch, T. and Menter, F., Heat Transfer Predictions Using Advanced Two-Equation Turbulence Models, CFX/ANSYS, Tech. Rept. CFX-VAL 10/0602, Otterfing, Germany, 2002
- Tong, X.L, Luke, E., Turbulence Models and Heat Transfer in Nozzle Flows, AIAA, 42(2004), 11, pp. 2391-2393. doi.org/10.2514/1.8900
- MacCormack, R.W., Current status of numerical solution of the Navier-Stokes equations, AIAA, 2012. doi.org/10.2514/6.1985-32
- J. Steger and R.F. Warming, Flux vector splitting of the invisid gas dynamics equations with application to finite difference methods, NASA, TM-78605, 1979. doi.org/10.1016/0021-9991(81)90210-2
- Campbell, C. and Farley, J., Performance of several conical convergent-divergent rocket type exhaust nozzles, NASA , TN D-467, 1960
- Bensayah, K., Kamri, K., Numerical investigation of supersonic flow separation in thrust-optimized contour rocket nozzle, Journal of the Serbian Society for Computational Mechanics, 16(2022), 2, pp. 43-55. 10.24874/jsscm.2022.16.02.03
- Bensayah, K, Hadjadj, A. and Bounif, A., Heat Transfer in Turbu- lent Boundary Layers of Conical and Bell Shaped Rocket Nozzles with Com- plex Wall Temperature," Numerical Heat Transfer part-a, 66(2014),pp. 289-314. dx.doi.org/10.1080/10407782.2013.873283
- Bensayah, K, Mahfoudi, El., Numerical prediction of compressible heat flow with complex wall temperature in supersonic rocket nozzles" Thermal Science, 22(2018),6 part B, pp. 3043-3056. doi.org/10.2298/TSCI160616270B
- Délery, J. and Marvin, J., Shock-Wave boundary layer Interactions, volume AGAR-Dograph N. 28, AGARD, 1986
- Schmucker, R.H., Status of flow separation prediction in liquid propellant rocket nozzles, Technical Memorandum TM X-64890. NASA, George C. Marshall Space Flight Center, 1974
- Lebedev, V.P., Lemanov, V.V. and Terekhov, V.I., 2006, Film-Cooling Efficiency in a Laval Nozzle Under Conditions of High Freestream Turbulence, Journal of Heat Transfer, 128(2006), pp. 571-579. doi.org/10.1115/1.2188508
- Sommer, T.P., So, R.M.C. and Zhang, H.S., A Near Wall Four-Equation Turbulence model for Compressible Boundary Layers, NASA Contractor Report (NASA-CR-4436), Arizona State Univ, 1994
- Ljuboja, M. and Rodi, W., Prediction of Horizontal and Vertical Turbulent Buoyant Wall Jets., J. Heat Transfer, 103(1981),2, pp. 343-349. doi.org/10.1115/1.3244464
- Cuffel, R.F., Back, L.H. and Massier, P.F., Transonic Flow field in a Supersonic Nozzle with Small Throat Radius of Curvature, AIAA Paper, 7(2012), 7, pp. 1364-1366