THERMAL SCIENCE
International Scientific Journal
INVESTIGATION ON THE IMPACT OF CARBON NANOPLATELETS ON THE THERMAL BEHAVIOR OF MAGNESIUM COMPOSITES
ABSTRACT
The Mg/2.4 wt.% CNP composite has a specific heat capacity improvement of 174%, according to DSC testing results. The TGA data reveals a 2.4% decrease in mass when comparing the Mg/2.4 wt.% CNP composite to pure Mg. The coefficient of heat transfer, the effectiveness of the fin, and the heat conduction via fin were all evaluated with a pin-fin transferring of heat under conditions of both free and forced convection. When carbon nanoplatelets are added to a Mg matrix, the resulting composites have better heat transfer characteristics when subjected to both natural and artificial convection.
KEYWORDS
PAPER SUBMITTED: 2023-03-22
PAPER REVISED: 2023-09-15
PAPER ACCEPTED: 2023-10-31
PUBLISHED ONLINE: 2024-02-18
THERMAL SCIENCE YEAR
2024, VOLUME
28, ISSUE
Issue 1, PAGES [765 - 774]
- Plerdsranoy, P., et al., Compaction of LiBH4-MgH2 doped with MWCNT-TiO2 for Reversible Hydrogen Storage, Int. J. Hydrogen Energy, 42 (2017), 2, pp. 978-986
- Sandeep, K. S., et al., Operational Control Decisions through Random Rule in Flexible Manufacturing System, in: Technology Innovation in Mechanical Engineering: Select Proceedings of TIME 2021, Springer, New York, USA, 2022, pp. 941-950
- Kumari, D., et al., Numerical Solution of the Effects of Heat and Mass Transfer on Unsteady MHD Free Convection Flow Past an Infinite Vertical Plate, Frontiers in Heat and Mass Transfer (FHMT), 16 (2021), 1, pp. 1-10
- Ramya, SD., et al., Performance Study on a Mono-Pass Solar Air Heating System (MPSAH) under the Influence of a PCM, Mater. Today Proc., 69 (2022), Part 3, pp. 934-938
- Munyalo, J. M., et al., Experimental Investigation on Supercooling, Thermal Conductivity and Stability of Nanofluid Based Composite Phase Change Material, Journal Energy Storage, 17 (2018), June, pp. 47-55
- Ramesh, B., et al., Optimization and Experimental Analysis of Drilling Process Parameters in Radial Drilling Machine for Glass Fiber/Nanogranite Particle Reinforced Epoxy Composites, Mater. Today Proc., 62 (2022), Part 2, pp. 835-840
- Pavithra, K. M., et al., A Free Convective Two-Phase Flow of Optically Thick Radiative Ternary Hybrid Nanofluid in an Inclined Symmetrical Channel through a Porous Medium, Symmetry (Basel), 15 (2023), 8
- Kumar, D. D., et al., Study of Microstructure and Wear Resistance of AA5052/B4C Nanocomposites as a Function of Volume Fraction Reinforcement to Particle Size Ratio by ANN, Journal Chem., 2023 (2023), ID2554098
- Rao, M. N., et al., Flexible manufacturing System Scheduling through Branch and Bound Algorithm, in: Technology Innovation in Mechanical Engineering: Select Proceedings of TIME 2021, Springer, New York, USA, 2022, pp. 825-836
- Munjam, S. R. K., et al., Novel Technique MDDIM Solutions of MHD Flow and Radiative Prandtl-Eyring Fluid over a Stretching Sheet with Convective Heating, International Journal of Ambient Energy, 43 (2022), 1, pp. 4850-4859
- Sathiaraj, G., et al., The Mechanical Behavior of Nanosized Al2O3-Reinforced Al-Si7-Mg Alloy Fabricated by Powder Metallurgy and Forging, ARPN Journal of Engineering and Applied Sciences, 11 (2016), 9, pp. 6056-6061
- Thiangviriya, S., et al., The MgH2-TiF4-MWCNT Based Hydrogen Storage Tank with Central Tube Heat Exchanger, Int. J. Hydrogen Energy, 44 (2019), 36, pp. 20173-20182
- Girimurugan, R., et al., Static and Total Pressure Analysis of Three Way Catalytic Convertor Using CFD, 107 (2022), 1, pp. 7381-7387
- Girimurugan, R., et al., Application of Deep Learning to the Prediction of Solar Irradiance through Missing Data, International Journal of Photoenergy, 2023 (2023), ID4717110
- Kasaeipoor, A., et al., Free Convection Heat Transfer and Entropy Generation Analysis of MWCNT-MgO (15% to 85%)/Water nanofluid Using Lattice Boltzmann Method in Cavity with Refrigerant Solid Body-Experimental Thermo-Physical Properties, Powder Technol., 322 (2017), Dec., pp. 9-23
- Mithran, R., Sadhasivam, C., Experimental studies of pressure drop in compact heat exchanger with aluminum Oxide and Magnesium Oxide, International Journal of Mechanical and Production Engineering Research and Development, 9 (2019), 6, pp. 525-534
- Amburi, P. K., et al., Novel Use of CuO Nanoparticles Additive for Improving Thermal Conductivity of MgO/Water and MWCNT/Water Nanofluids, Journal Therm. Anal. Calorim., 148 (2023), 19, pp. 10389-10398
- Khetib, Y., et al., The Influence of Forced Convective Heat Transfer on Hybrid Nanofluid-flow in a Heat Exchanger with Elliptical Corrugated Tubes: Numerical Analyses and Optimization, Applied Sciences (Switzerland), 12 (2022), 6
- Toudja, N., et al., Thermosolutal Mixed Convection in a Lid-Driven Irregular Hexagon Cavity Filled with MWCNT-MgO (15-85%)/CMC Non-Newtonian Hybrid Nanofluid, Journal Therm. Anal. Calorim., 147 (2022), 1, pp. 855-878
- Kardam, A., et al., Ultrafast Thermal Charging of Inorganic Nanophase Change Material Composites for Solar Thermal Energy Storage, RSC Adv., 5 (2015), 70, pp. 56541-56548
