THERMAL SCIENCE
International Scientific Journal
HEAT TRANSFER STUDIES ON SPIRAL PLATE HEAT EXCHANGER
ABSTRACT
In this paper, the heat transfer coefficients in a spiral plate heat exchanger are investigated. The test section consists of a plate of width 0.3150 m, thickness 0.001 m and mean hydraulic diameter of 0.01 m. The mass flow rate of hot water (hot fluid) is varying from 0.5 to 0.8 kg/s and the mass flow rate of cold water (cold fluid) varies from 0.4 to 0.7 kg/s. Experiments have been conducted by varying the mass flow rate, temperature, and pressure of cold fluid, keeping the mass flow rate of hot fluid constant. The effects of relevant parameters on spiral plate heat exchanger are investigated. The data obtained from the experimental study are compared with the theoretical data. Besides, a new correlation for the Nusselt number which can be used for practical applications is proposed.
KEYWORDS
PAPER SUBMITTED: 2007-12-17
PAPER REVISED: 2008-03-12
PAPER ACCEPTED: 2008-03-17
THERMAL SCIENCE YEAR
2008, VOLUME
12, ISSUE
Issue 3, PAGES [85 - 90]
- Seban, R. A., McLaughlin, E. F., Heat Transfer in Tube Coils with Laminar and Turbulent Flow, International Journal of Heat and Mass Transfer, 6 (1963), 5, pp. 387-395
- Rogers, G. F. C., Mayhew, Y. R., Heat Transfer and Pressure Loss in Helically Coiled Tubes with Turbulent Flow, International Journal of Heat and Mass Transfer, 7 (1964), 11, pp.1207-1216
- Mori, Y., Nakayama, W., Study on Forced Convective Heat Transfer in Curved Pipes, International Journal of Heat and Mass Transfer, 8 (1965), 1, pp. 67-82
- Kubair, V., Kuloor, N. R., Heat Transfer to Newtonian Fluids in Coiled Pipes in Laminar Flow, International Journal of Heat and Mass Transfer, 9 (1966), 1, pp. 63-75
- Jha, R. K., Rao, M. R., Heat Transfer through Coiled Tubes in Agitated Vessels, International Journal of Heat and Mass Transfer, 10 (1967), 3, pp. 395-397
- Kalb, C. E., Seader, J. D., Heat and Mass Transfer Phenomena for Viscous Flow in Curved Circular Tubes, International Journal of Heat and Mass Transfer, 15 (1972), 4, pp. 801-817
- Kalb, C. E., Seader, J. D., Fully Developed Viscous-Flow Heat Transfer in Curved Circular Tubes with Uniform Wall Temperature, AIChE Journal, 20 (1974), 2, pp.340-346
- Yao, L. S., Berger, S. A., Flow in Heated Curved Pipes, Journal of Fluid Mechanics, 88 (1978), 2, pp. 339-354
- Zapryanov, Z., Christov, C., Toshev, E., Fully Developed Laminar Flow and Heat Transfer in Curved Tubes, International Journal of Heat and Mass Transfer, 23 (1980), 6, pp. 873-880
- Lee, J. B., Simon, H. A., Chow, J. C. F., Buoyancy in Developed Laminar Curved Tube Flows, International Journal of Heat and Mass Transfer, 28 (1985), 2, pp. 631-640
- Havas, G. A.,Deak., Sawinsky, J., Heat Transfer to Helical Coils in Agitated Vessels, The Chemical Engineering Journal, 35 (1987), 1, pp. 61-64
- Acharya, N., Sen, M.,Chang, H. C., Heat Transfer Enhancement in Coiled Tubes by Chaotic Mixing, International Journal of Heat and Mass Transfer, 35 (1992), 10, pp. 2475-2489
- Acharya, N., Sen, M., Chang, H. C., Analysis of Heat Transfer Enhancement in Coiled-Tube Heat Exchangers, International Journal of Heat and Mass Transfer, 44 (2001), 17, pp. 3189-3199
- Lemenand, T., Peerhossaini. H., A Thermal Model for Prediction of the Nusselt Number in a Pipe with Chaotic Flow, Applied Thermal Engineering, 22 (2002), 15, pp. 1717-1730
- Guo, L., et al., Transient Convective Heat Transfer in a Helical Coiled Tube with Pulsating Fully Developed Turbulent Flow, International Journal of Heat and Mass Transfer, 41 (1998), 19, pp. 2867-2875
- Inagaki, Y., et al., Thermal Hydraulic Study on a High-Temperature Gas-Gas Heat Exchanger with Helically Coiled Tube Bundles, Nuclear Engineering and Design, 185 (1998), 2, pp. 141-151
- Martin, H., Heat Exchangers, Hemisphere Publishing Corporation, London, 1992