THERMAL SCIENCE

International Scientific Journal

Mohammad B. Ayani

,

Javad Abolfazli Esfahani

,

Antonio C. M. Sousa

THE EFFECT OF SURFACE REGRESSION ON THE DOWNWARD FLAME SPREAD OVER A SOLID FUEL IN A QUIESCENT AMBIENT

ABSTRACT
The present work is addressed to the numerical study of the transient laminar opposed-flow flame spread over a solid fuel in a quiescent ambient. The transient governing equations - full Navier-Stokes, energy, and species (oxygen and volatiles) for the gas phase, and continuity and energy equations for the solid phase (fuel) with primitive variables are discretized in a staggered grid by a control volume approach. The second-order Arrhenius kinetics law is used to determine the rate of consumption of volatiles due to combustion, and the zero-order Arrhenius kinetics law is used to determine the rate of degradation of solid fuel. The equations for the fluid and solid phases are solved simultaneously using a segregated technique. The physical and thermo-physical properties of the fluid (air) such as density, thermal conductivity, and viscosity vary with temperature. The surface regression of the solid fuel is modeled numerically using a discrete formulation, and the effect upon the results is analyzed. The surface regression of the solid fuel as shown affects on the fuel surface and gas temperature, mass flux and velocity of volatiles on the top surface of fuel, total energy transferred to the solid phase, etc. It seems the results to be realistic. .
KEYWORDS
fire, flame spread, standard tests, assessment, materials
PAPER SUBMITTED: 2005-12-15
PAPER REVISED: 2006-01-15
PAPER ACCEPTED: 2006-02-20
DOI REFERENCE: https://doi.org/10.2298/TSCI0702067A
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2007, VOLUME 11, ISSUE Issue 2, PAGES [53 - 66]
REFERENCES
  1. ***, Code of Practice for the Provision of Means of Access for Firefighting and Rescue Purpose, Building Authority, Hong Kong Special Administrative Region, 2004
  2. ***, Code of Practice for the Provision of Means of Escape in Case of Fire, Building Authority, Hong Kong, 1996
  3. ***, Code of Practice for Fire Resisting Construction, Buildings Department, Hong Kong, 1996
  4. Bukowski, R. W., Babrauskas, V., Developing Rational, Performance-Based Fire Safety Requirements in Model Building Codes, Fire and Materials, 19 (1994), 2, pp. 173-191
  5. ***, Code of Practice for Minimum Fire Service Installations and Equipment and Inspection and Testing of Installations and Equipment, Fire Services Department, Hong Kong, 1998
  6. ***, Fire Tests on Building Materials and Structure, Part 7. Method of Test to Determine the Classification of the Surface Spread of Flame of Products, BS476: Part 7: 1997, British Standards Institution, London, 1997
  7. Chow, W. K., Fire Hazard Assessment on Polyurethane Sandwich Panels for Temporary Accommodation Units, Polymer Testing, 23 (2004), 8, pp. 973-977
  8. ***, Guide to Fire Engineering Approach, Practice Note for Authorized Persons and Registered Structural Engineers PNAP 204, Buildings Department, Hong Kong, 1998
  9. Chow, W. K., Fire Safety in Green or Sustainable Buildings: Application of the Fire Engineering Approach in Hong Kong, Architectural Science Review, 46 (2003), 3, pp. 297-303
  10. ***, Application of Fire Safety Engineering Principles to the Design of Buildings, BS7974: 2001, British Standards Institution, London, 2001
  11. Babrauskas, V., Grayson, S. J., Heat Release in Fires, Elsevier Applied Science, London, 1992
  12. Cleary, T. G., Quintiere, J. G., A Framework for Utilizing Fire Property Tests, Proceedings (Eds. G. Cox, B. Langford), 3rd International Symposium, Fire Safety Science, Edinburgh Scotland, UK, 1991, pp. 647-656
  13. ***, Legislative Council, Karaoke Establishments Bill. Press Release, Hong Kong Special Administrative Region Government, 2000
  14. Chow, W. K., Lui Gigi, C. H., A Fire Safety Ranking System for Karaoke Establishments in Hong Kong, Journal of Fire Sciences, 19 (2001), 2, pp. 106-120
  15. Leung, C. W., Fire Spreading of Materials and Its Contribution to Compartment Fire, Ph. D. thesis, The Hong Kong Polytechnic University, Hong Kong, 2006
  16. Chow, W. K., Han, S. S., Chow, C. L., Fire Behaviour of Timber Products with and without Fire Retardant, Journal of Applied Fire Science, 11 (2002-2003), 3, pp. 209-227
  17. Hasemi, Y., Yoshida, M., Hayashi, Y., Yabuta, T., Correlations between Bench-Scale Test and Room Corner Test Based on a Flame Spread Modelling: Interpretation of Small and Intermediate Scale Fire Testing, NISTIR 6588, 15th Meeting of the US-Japan National Research, Panel on Fire Research and Safety, San Antonio, Tex., USA, 2000, Vol. 1, pp. 51-61
  18. ***, Standard Test Method for Determining Material Ignition and Flame Spread Properties, ASTM E1321-97a, American Society for Testing and Materials, West Conshohocken, Pa., USA, 1997
  19. ***, Standard Test Method for Surface Burning Characteristics of Building Materials, ASTM E84-99, American Society for Testing and Materials, West Conshohocken, Pa., USA, 1999
  20. ***, Standard Method of Test of Surface Burning Characteristics of Building Materials, NFPA 255: 2000, National Fire Protection Association, Quincy, Ma., USA, 2000
  21. ***, Fire Tests - Full-Scale Room Test for Surface Products, ISO 9705: 1993(E), International Standards Organization, Geneva, Switzerland, 1996
  22. Babrauskas, V., Wickström, U., The Rational Development of Bench-Scale Fire Tests for Full-scale Fire Prediction, Proceedings, 2nd International Symposium on Fire Safety Science, Hemisphere Publishing Comp., New York, USA, 1989, pp. 813-822
  23. Walker, A.G., Flammability Testing in Europe, Fire and Materials, 4 (1980), 3, pp. 149-153
  24. Murrell, J. M., Barnfield, J. R., The Role and Application of Standard Tests, Fire and Materials, 13 (1988), 1, pp. 141-147
  25. Allender, P. J., Specification of Combustible Materials for Passenger Train Design, Fire and Materials, 8 (1984), 3, pp. 113-124
  26. Janssens, M. L., Garabedian A., Gray, W., Establishment of International Standards Organization (ISO) 5660 Acceptance Criteria for Fire Restricting Materials Used on High Speed Craft. Final Report, No. CG-D-22-98, U. S. Coast Guard Research and Development Center, Southwest Research Institute, San Antonio, Tex., USA, 1998
  27. ***, Recommendation on Improved Fire Test Procedure for Surface Flammability of Bulkhead, Ceiling, and Surface Finish Materials, IMO Resolution A 653(16), International Maritime Organization, London, 1989. Reproduced in the FTP Code, pp. 61-93
  28. ***, Standard Test Method for Flammability of Marine Surface Finishes, ASTM E1317-97a, American Society for Testing and Materials, West Conshohocken, Ma., USA, 1997
  29. Dowling, V. P., McArthur, N. A., Webb, A. K., Leonard, J. E., Blackmore, J. M., Large-Scale Fire Tests on Three Building Materials, Proceedings, 3rd International Conference on Fire Research and Engineering, Society of Fire Protection Engineers, Chicago, Ill., USA, 1999, pp. 217-227
  30. Bhatnagar, S. K., Varshney, B. S., Mohanty, B., An Appraisal of Standard Methods for Determination of Flame Spread Behaviour of Materials, Fire and Materials, 16 (1992), 3, pp. 141-151
  31. Quintiere, J., Harkeroad, M., New Concepts for Measuring Flame Spread Properties, Fire Safety Science and Engineering, ASTM STP 882 (Ed. T. Z. Harmanthy), 1985, pp. 239-267
  32. Dyar, C. G., Boser, R., Testing Low-Flame-Spread Wallcoverings on Typical Construction Substrates in ASTM E84, Fire Technology, 32 (1996), 3, pp. 231-238
  33. Chow, W. K., Han, S. S., Superposition of Heat Release Rate Curves for Combustibles with Bench-Scale Tests, Polymer Testing, 25 (2006), 1, pp. 75-82
  34. Babrauskas, V., Sandwich Panel Performance in Full-Scale and Bench-Scale Fire Tests, Fire and Materials, 21 (1997), 2, pp. 53-65
  35. Chow, W. K., Based Fire Codes, International Journal on Engineering Performance (Special issue on full-scale burning tests), 6 (2004), 3, pp. 88-180
  36. Gardner, W. D., Thomson, C. R., Flame Spread Properties of Forest Products - Comparison and Validation of Prescribed Australian and North American Flame Spread Test Methods, Fire and Materials, 12 (1988), 2, pp. 71-85
  37. Hovde, P. J., Comparison between Nordtest and ISO Fire Test Methods. Evaluation of Classification Systems, EUREFIC Seminar Proceedings, Copenhagen, 1991, Interscience Communications, London, pp. 47-54
  38. Sundström, B., Goranssön, U., Possible Classification Criteria and Their Implications for Surface Materials Tested in Full Scale According to ISO DP 9705 or NT Fire 025, SP Report 1988: 19, Fire Technology, SP, Swedish National Testing Institute, Sweden, 1988
  39. Sundström, B., Classification of Wall and Ceiling Linings, EUREFIC Seminar Proceedings, Copenhagen, 1991, Interscience Communications, London, pp. 23-36
  40. Bluhme, D. A., Correlation of Test Results with Other European Test Methods, EUREFIC Seminar Proceedings, Copenhagen, 1991, Interscience Communications, London, pp. 55-63
  41. Grenier, A. T., Janssens, M. L., Nash, L., Developing Cone Calorimeter Acceptance Criteria for Materials Used in High Speed Craft, Fire and Materials, 24 (2000), 1, pp. 29-35
  42. ***, Standard for Qualifying Marine Materials for High Speed Craft as Fire-Resisting Materials, Resolution MSC.40(64), International Maritime Organization, London, 1994
  43. ***, European Commission, Commission Decision of September 9, 1994, Implementing Article 20 of Directive 89/106/EEC on Construction Products, Official Journal of the European Communities, No. 6, Brussels, 1994
  44. ***, Reaction to Fire Tests for Building Products. Building Products Excluding Floorings Exposed to the Thermal Attack by a Single Burning Item, BS EN 13823:2002, British Standards Institution, London, 2002
  45. ***, The Building Regulations 2000. Approved Document B: Fire Safety, Office of the Deputy Prime Minister, London, 2000
  46. ***, European Commission, Update No. 9 on Progress Regarding Fire Related Issues, Document, Brussels, 1998
  47. Hedskog, B., Ryber, F., The Classification Systems for Surface Lining Materials Used in Buildings in Europe and Japan - A Summary and Comparison, Report 5023, Department of Fire Safety Engineering, Lund Institute of Technology, Lund University, Lund, Sweden,1998
  48. ***, Reaction to Fire Tests for Building Products. Non-Combustibility Test, BS EN ISO1182: 2002, British Standards Institution, London, 2002
  49. ***, Reaction to Fire Tests for Building Products. Determination of the Heat of Combustion, BS EN 1716: 2002, British Standards Institution, London, 2002
  50. ***, Reaction to Fire Tests. Ignitability of Building Products Subjected to Direct Impingement of Flame. Single-flame Source Test, BS EN ISO 11925-2:2002, British Standards Institution, London, 2002
  51. ***, Fire Classification of Construction Products and Building Elements. Part 1: Classification Using Test Data from Reaction to Fire Tests, BS EN 13501-1: 2002, British Standards Institution, London, 2002
  52. ***, Fire Tests - Reaction to Fire - Part 1: Rate of Heat Release from Building Products (Cone Calorimeter Method), ISO 5660-1: 1993, International Standards Organization, Geneva, Switzerland, 1993
  53. ***, Certification of Quasi-Noncombustible Materials and Fire Retardant Materials, Notification No. 1321 of the Ministry of Construction, 3rd ed., The Building Center of Japan, Tokyo, 1994
  54. Yoshida, M., Hasemi, Y., Tanaike, Y., Tasaka, S., Saito, F., Fangrat, J., Comparative Studies in the Reduced-Scale Model Box and the Room Corner Test, Proceedings, 8th International Interflam Conference, Edinburgh, Scotland, UK, 1999, 1, pp. 23-33
  55. ***, Standard Test Method for Surface Burning Characteristics of Building Materials (E84-91a), Annual Book of ASTM Standards, Section 4, Part 7, American Society for Testing Materials, Philadelphia, Pa., USA, 1993, pp. 299-313
  56. Torvi, D. A., Lougheed, G. D., Carpenter, D. W., Senez, P. L., Locke, H. A., Evaluating Materials and Fire Protection Systems Using Full-scale Fire Tests, Proceedings, 3rd International Conference on Fire Research and Engineering, Society of Fire Protection Engineers, Chicago, Ill., USA, 1999, pp. 363-374
  57. Belles, D. W., Fisher, F. L., Williamson, R. B., How Well Does ASTM E84 Predict Fire Performance of Textiles and Wallcoverings, Fire Journal, 84 (1988), 1, pp. 25-27, 29-30, 74
  58. Isner, M. S., Five Die in High-Rise Office Building Fire, Fire Journal, 84 (1990), 4, pp. 50-59
  59. ***, Standard Building Code (SBCC), Southern Building Code Congress International, Birmingham, Al., USA, 1997
  60. ***, Uniform Building Code, The International Conference of Building Officials, Whittier, Cal., USA, 1997
  61. ***, BOCA National Building Code, The Building Officials and Code Administrators International, Inc., Country Club Hills, Ill., USA, 1999
  62. ***, Life Safety Code Handbook, National Fire Protection Association, Quincy, Ma., USA, 1991
  63. ***, Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies, ULC Standard CAN4-S102-M83, Underwriters' Laboratories of Canada, Scarborough, Ont., Canada, 1983
  64. ***, Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Covering, and Miscellaneous Materials and Assemblies, ULC Standard CAN4-S102.2-M83, Underwriters' Laboratories of Canada, Scarborough, Ont., Canada, 1983
  65. Mehaffey, J. R., Flammability of Building Materials and Fire Growth, Proceedings, Building Science Insight '87, Institute for Research in Construction, National Research Council Canada, Ottawa, NRCC 2827, 1987, pp. 21-23
  66. Ostman, B., Nussbaum, R., Correlation between Small-Scale Rate of Heat Release and Full-Scale Room Flashover for Surface Linings, Proceedings (Ed. Wakamatsu et al.), 2nd International Symposium on Fire Safety Science, International Association of Fire Safety Science (IAFSS), Tokyo, Hemisphere Publishing Comp., New York, USA, 1987, pp. 823-832
  67. Ostman, B., Tsantaridis, L., Correlation between Cone Calorimeter Data and Time to Flashover in the Room Fire Test, Fire and Materials, 18 (1994), 4, pp. 205-209
  68. Karlsson, B., Modeling Fire Growth on Combustible Lining Materials in Enclosures, Report TVB-1009, Department of Fire Safety Engineering, Lund University, Lund, Sweden, 1992
  69. Beyler, C. L., Hunt, S. P., Lattimer, B. Y., Iqbal, N., Lantenberger, C., Prediction of ISO 9705 Room/Corner Test Results, Volume I, Final Report No. CG-D-22-99, U. S. Coast Guard Research and Development Center, Groton, Ct., USA, 1999
  70. Wright, M. T., Barnett, J. R., Dembsey, N. A., Flame Spread on Cored Composite Panels for Use in High Speed Craft, Proceedings, 3rd International Conference on Fire Research and Engineering, Society of Fire Protection Engineers, Chicago, Ill. , USA, 1999, pp. 228-239
  71. Mitler, H., Steckler, K., Spread - A Model of Flame Spread on Vertical Surfaces, Technical Report NISTIR 5619, Department of Commerce, National Institute of Standards and Technology, Gaithersburg, Md., USA (written 1993, issued 1995)
  72. Mitler, H., An Algorithm to Describe the Speed of a Wall Fire Under a Ceiling, Technical Report NISTIR 5547, Department of Commerce, National Institute of Standards and Technology, Gaithersburg, Md., USA, 1994
PDF VERSION [DOWNLOAD]
The effect of surface regression on the downward flame spread over a solid fuel in a quiescent ambient

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence