THERMAL SCIENCE
International Scientific Journal
DIMENSIONLESS ANALYSIS FOR THE 3-D PRINTING PROCESS
ABSTRACT
The dimensionless analysis is a highly effective mathematical tool for the physical comprehension of intricate phenomena. This paper employs the aforementioned mathematical tool to study the 3-D printing process. A number of criteria for a precise printing process have been identified, which can be used to optimize the printing process and offer a new strategy to improve its printing accuracy.
KEYWORDS
PAPER SUBMITTED: 2024-04-15
PAPER REVISED: 2024-07-07
PAPER ACCEPTED: 2024-07-07
PUBLISHED ONLINE: 2025-07-06
THERMAL SCIENCE YEAR
2025, VOLUME
29, ISSUE
Issue 3, PAGES [1701 - 1704]
- Zastrow, M., The New 3-D Printing, Nature, 578 (2020), 7793, pp. 20-23
- Wallin, T. J., et al., 3-D Printing of soft Robotic Systems, Nature Reviews Materials, 3 (2018), 6, pp. 84- 100
- Joyee, E. B., Pan, Y. Y., A Fully 3-D Printed Inchworm-Inspired Soft Robot with Magnetic Actuation, Soft Robotics, 6 (2019), 3, pp. 333-345
- Thompson, B., Bundell, S., How to 3-D Print Fully Formed Robots, Nature, On-line first, doi.org/10.1038/d41586-023-03570-w, 2023
- Zhang, S. J., et al., Piezo Robotic Hand for Motion Manipulation from Micro to Macro, Nature Communications, 14 (2023), 1, 500
- Kong, Y. L., Multi-Material 3-D Printing Guided by Machine Vision, Nature, 623 (2023), 7987, pp. 488-490
- Buchner, T. J. K., et al., Vision-Controlled Jetting for Composite Systems and Robots, Nature, 623 (2023), 7987, pp. 522-530
- Zuo, Y. T., A Gecko-like Fractal Receptor of a Three-dimensional Printing Technology: A Fractal Oscillator, Journal of Mathematical Chemistry, 59 (2021), 3, pp. 735-744
- Zuo, Y. T., Effect of SiC Particles on Viscosity of 3-D Print Paste: A Fractal Rheological Model and Experimental Verification, Thermal Science, 25 (2021), 3B, pp. 2403-2407
- Zuo, Y. T., Liu, H. J., A Fractal Rheological Model for SiC Paste Using a Fractal Derivative, Journal of Applied and Computational Mechanics, 7 (2021), 1, pp. 13-18
- Zuo, Y. T., Liu, H. J., Fractal Approach to Mechanical and Electrical Properties of Graphene/SiC Composites, Facta Universitatis-Series Mechanical Engineering, 19 (2021), 2, pp. 271-284
- Zuo, Y. T., Liu, H. J., Instability of the Printing Jet During the Three-dimensional Printing Process, Journal of Low Frequency Noise, Vibration & Active Control, 40 (2021), 4, pp. 1795-1803
- Estrada-Diaz, J. A., et al., A Mathematical Dimensionless Model for Electrohydrodynamics, Results in Physics, 25 (2021), 10425
- He, J.-H., On the Height of Taylor Cone in Electrospinning, Results in Physics, 17 (2020), June, 103096
- He, C. H., et al., Taylor Series Solution for Fractal Bratu-type Equation Arising in Electrospinning Process, Fractals, 28 (2020), 1, 2050011
- He, J.-H., et al., The Maximal Wrinkle Angle During the Bubble Collapse and Its Application to the Bubble Electrospinning, Frontiers in Materials, 8 (2022), 800567
- Qian, M. Y., He, J.-H., Collection of Polymer Bubble As A Nanoscale Membrane, Surfaces and Interface, 28 (2022), 101665
- Qian, M. Y., et al., Enhanced Piezoelectric Performance of PVDF Nanofibers by Biomimicking The Spider's Long Liquid Transport, Chemical Engineering Journal, 483 (2024), 149159
- He, C. H., Liu, C., Fractal Dimensions of a Porous Concrete and Its Effect on the Concrete's Strength, Facta Universitatis Series, Mechanical Engineering, 21 (2023), 1, pp. 137-150
- He, C. H., et al., A Novel Bond Stress-slip Model for 3-D Printed Concretes, Discrete and Continuous dynamical Systems-Series S, 15 (2022), 7, pp. 1669-1683
- Zuo, Y. T., Liu, H. J., Is the Spider a Weaving Master or a Printing Expert?, Thermal Science, 26 (2022), 3B, pp. 2471-2475
- Zuo, Y. T., Gecko-inspired Fractal Buffer for Passenger Elevator, Facta Universitatis-Series Mechanical Engineering, On-line first, doi.org/10.22190/FUME240314022Z, 2024
- Aronne, M., et al., 3-D-Printed MEMS in Italy, Micromachines, 15 (2024), 6, 678
- Dahle, R., Rasel, R., 3-D Printing as an Effective Educational Tool for MEMS Design and Fabrication, IEEE Transactions on Education, 59 (2016), 3, pp. 210-215
- He, J.-H., Periodic Solution of a Micro-Electromechanical System, Facta Universitatis, Series: Mechanical Engineering, 22 (2024), 2, pp. 187-198
- He, J.-H., et al., Piezoelectric Biosensor Based on Ultrasensitive MEMS System, Sensors and Actuators A: Physical, 376 (2024), 115664
- He, C. H., A Variational Principle for a Fractal Nano/Microelectromechanical (N/MEMS) System, International Journal of Numerical Methods for Heat & Fluid Flow, 33 (2023), 1, pp. 351-359
- He, C. H., et al., A Novel Bond Stress-Slip Model for 3-D Printed Concretes, Discrete and Continuous Dynamical Systems, 15 (2021), 7, pp. 1669-1683
- Liu, H., et al., Influence of Pore Defects on the Hardened Properties of 3-D Printed Concrete with Coarse Aggregate, Additive Manufacturing, 55 (2022), 102843
- Zuo, Y. T., Variational Principle for a Fractal Lubrication Problem, Fractals, 32 (2024), 5, pp. 1-6
- Zhang, J. Q., et al., Ultrauniform, Strong, and Ductile 3-D Printed Titanium Alloy Through Bifunctional Alloy Design, Science, 383 (2024), Feb., pp. 639-645
- Zhang, L. C., Wang, J. C., Stabilizing 3-D Printed Metal Alloys, Science, 383 (2024), Feb., pp. 586-587
- Han, C., et al., A High-Precision Numerical Approach to Solving Space Fractional Gray-Scott Model, Applied Mathematics Letters, 125 (2022), 1077596