THERMAL SCIENCE

International Scientific Journal

DESIGN AND THERMAL ANALYSIS OF IMPULSE THRUSTERS FOR CONTROL SYSTEMS OF GUIDED MISSILES

ABSTRACT
This paper presents design analysis of impulse thrusters intended for guidance and control systems of missiles. Impulse thrusters are small solid propellant, short-operation, high thrust rocket motors. They are mounted laterally on the missile’s control block, and are used to generate control forces to adjust its trajectory. To minimize the control block weight and achieve better missile performances, aluminum alloy is utilized, due to its favorable strength-to-weight ratio and ease of manufacturing productivity. However, the sensitivity of aluminum alloys to high temperatures necessitates a comprehensive thermal analysis, to ensure structural integrity and performance reliability under operational conditions. For that, three impulse thruster models are designed with incrementally higher thrust and thermal loading. An internal ballistic model is employed to predict their performances, with results validated through static experimental tests. Then, numerical CFD and heat transfer simulations are conducted, to predict eventual thruster block structure overheating, to achieve the maximum possible performances. The study highlights the importance of material selection, thermal analysis, and propellant design for optimizing impulse thruster performance and ensuring the reliability of control systems of missiles.
KEYWORDS
PAPER SUBMITTED: 2024-09-12
PAPER REVISED: 2024-12-01
PAPER ACCEPTED: 2024-12-07
PUBLISHED ONLINE: 2025-01-09
DOI REFERENCE: https://doi.org/10.2298/TSCI240912284A
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2025, VOLUME 29, ISSUE Issue 1, PAGES [651 - 662]
REFERENCES
  1. Karthikeyan, T. V., Kapoor, A. K., Guided Missiles, Defence Research and Development Organization, Delhi, India, 1990
  2. Palumbo, N. F., Guest Editor's Introduction: Homing Missile Guidance and Control, Johns Hopkins APL Technical Digest, 29 (2010), 1, 8
  3. Gupta, S. K., et al., Trajectory Correction Flight Control System using Pulsejet on an Artillery Rocket, Defence Science Journal, 58 (2008), 1, pp. 15-33
  4. Glebocki, R., Jacewicz, M., Sensitivity Analysis and Flight Tests Results for a Vertical Cold Launch Mis­sile System, Aerospace, 7 (2020), 168
  5. Bagley, C. J., General Dynamics Corp, Lateral Thruster for Missiles. Patent 4,967,982, patentim­ages.storage.googleapis.com/43/02/e2/02235cbc360569/US4967982.pdf, 1990
  6. Pavković, B., et al., Enhancing the Precision of Artillery Rockets Using Pulsejet Control Systems with Active Damping, Scientific Technical Review, 62 (2012), 2, pp. 10-19
  7. ***, Oryx, www.oryxspioenkop.com/2021/05/novel-capabilities-ukraines-vilkha-mrl.html?m=1, 2021
  8. Živković, S., Technical Solutions and Gasodynamic Efficiency of Thrust Vector Control Systems for Mis­siles (in Serbian), MTI, Belgrade, Serbia, 2015
  9. Divac, S., Elements of Solid Propellants Rocket Motors Construction (in Serbian), in: Solid Propellant Rocket Motors MTI, Belgrade, Serbia, 2013, pp. 223-280
  10. Zečević, B., et al., Specific Design Features of Solid Propellant Rocket Motors for Shoulder-Launched Weapon Systems, Proceedings, 8th International Armament Conference on Scientific Aspects of Arma­ment and Safety Technology, Pultusk, Poland, 2010
  11. Caveny. L. H., Summerfield, M., Micro-Rocket Impulsive Thrusters, Department of Aerospace and Me­chanical Sciences, Princeton University, New Jersey, USA, 1971
  12. Platzek, H., Preliminary Solid Rocket Motor Design Techniques, Naval Weapons Center, China Lake, Cal., USA, 1975
  13. Živković, S., et al., Experimental Determination of Rocket Motor Internal Ballistic Coefficients and Per­formance Parameters, Proceedings, OTEH 2014: 6th International Scientific Conference on Defensive Technologies, Belgrade, Serbia, 2014, pp. 289-295
  14. Živković, S., et al., Solid Propellant Rocket Motor Components Initial Design, Proceedings, OTEH 2011: 4th International Scientific Conference on Defensive Technologies, Belgrade, Serbia, 2011
  15. Marjanović, G., et al., Program "SVOD" for Solid Propellant Grain Design, Proceedings, OTEH 2012: 5th International Scientific Conference on Defensive Technologies, Belgrade, Serbia, 2012
  16. Wolszakiewicz, T., et al., Thermochemistry of the Binary System Nitrocellulose+2,4-Dinitrotoluene, Journal of Thermal Analysis and Calorimetry, 77 (2004), July, pp. 353-361
  17. Alazeezi, M., et al., Two-Component Propellant Grain for Rocket Motor Combustion Analysis and Geo­metric Optimization, Thermal Science, 26 (2022), 2B, pp. 1567-1578
  18. Živković, S., et al., Experimental and Simulation Testing of Thermal Loading in the Jet Tabs of a Thrust Vector Control System, Thermal Science, 20 (2016), Suppl. 1, pp. S275-S286
  19. ***, ANSYS Inc, Fluent User's Guide, www.ansys.com

2025 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence