THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

DESIGN AND PERFORMANCE ANALYSIS OF A HEAT PUMP SYSTEM FOR MOTOR PHASE CHANGE THERMAL STORAGE

ABSTRACT
Along with the rapid economic development and social progress, the problem of energy and environment is becoming more and more outstanding. Therefore, it is very important to use new energy saving techniques to increase energy consumption and reduce energy consumption. In this paper, we have developed a hot water system, which is based on solar energy technology, gas-source heat pump, and phase change energy storage technology. The system was designed and constructed, and its performance was tested in various control conditions, with an emphasis on the analysis of the influence of phase change heat supply on heat storage properties. In this paper, the effect of the heat storage property is analyzed. Studies have shown that compared to a conventional tank that does not have a phase change heat storage device, the heat storage tanks equipped with phase change energy storage devices have longer discharge time, higher discharge temperature, better temperature, and better operation efficiency. In addition, the data show that flow rate control is also an important factor in optimizing the thermal storage characteristics of the system.
KEYWORDS
PAPER SUBMITTED: 2023-04-05
PAPER REVISED: 2023-07-01
PAPER ACCEPTED: 2023-08-11
PUBLISHED ONLINE: 2024-04-13
DOI REFERENCE: https://doi.org/10.2298/TSCI2402229X
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2024, VOLUME 28, ISSUE Issue 2, PAGES [1229 - 1235]
REFERENCES
  1. Xiao, Z., Heat Transfer and Mechanical Characteristics of the Absorber in Solar Photo-Thermal Power Generation System, Thermal Science, 27 (2023), 2A, pp. 1023-1030
  2. Heng, W., et al., Experimental Study on Phase Change Heat Storage Floor Coupled with Air Source Heat Pump Heating System in a Classroom, Energy and Buildings, 251 (2021), 8, 111352
  3. Mckenna, P., et al., Thermal Energy Storage Using Phase Change Material: Analysis of Partial Tank Charging and Discharging on System Performance in a Building Cooling Application, Applied Thermal Engineering, 198 (2021), 3, 117437
  4. Ide, T., et al., Influences of Operational Improvement on Ground Temperature and Energy Performance in Ground Source Heat Pump System in Warm Region, AIJ Journal of Technology and Design, 229 (2023), 71, pp. 280-285
  5. Fujinawa, T., Mae, M., Performance Evaluation of Residential Heat-Pump Water Heaters - Part 1: Performance Test Data Acquisition and Analysis, Journal of Environmental Engineering (Transactions of AIJ), 86 (2021), 789, pp. 840-851
  6. Ren, Y., and Ogura, H., Performance Evaluation of off-Grid Solar Chemical Heat Pump for Cooling/Heating, Solar Energy, 224 (2021), June, pp. 1247-1259
  7. Yao, J., et al., Two-Phase Flow Investigation in Channel Design of the Roll-Bond Cooling Component for Solar Assisted PVT Heat Pump Application, Energy Conversion and Management, 235 (2021), 7, 113988
  8. Oota, M., et al., Analysis of Hems Data in a Detached House - Part 3: Energy Balance Analysis Including Photovoltaic and Battery Energy Storage, Journal of Environmental Engineering (Transactions of AIJ), 86 (2021), 784, pp. 660-669
  9. Li, J., Signal Processing and Thermal Performance Analysis of Motor Heat Recovery System, Thermal Science, 27 (2023), 2A, pp. 1125-1131
  10. Zamengo, M., et al., Numerical Evaluation of a Carnot Battery System Comprising a Chemical Heat Storage/Pump and a Brayton Cycle, The Journal of Energy Storage, 41 (2021), 7, 102955

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence