THERMAL SCIENCE

International Scientific Journal

EXPERIMENTAL AND NUMERICAL RESEARCH OF THE FLOW INSIDE THE CONTROL VALVES TRIM

ABSTRACT
In this paper are presented desing, testing and numerical analysis for two manufactured control valve trims. Valve trim is consisted of cage or dick stack, plug, stem and seat. Size from app. 15.88 mm (0.625 in) up to 101.6 mm (4 in) is suitable for 3-D metal and plastic print, what is presented in this paper. Selective laser melting 3-D metal printing is applied on the disc presented in this paper. Even better material properties from rest of the valve parts could be obtained. This is of great importance for valve retrofitting. In this paper is presented, also, new developed channel geometry, what is followed by various fluid-flow phenomena. Measurement results for second prototype manufactured by 3-D printing using plastics are presented in details. Here is shown, in short, procedure for determination of KV values of the test valves according to the EN 60534-2-3, Industrial-process control valves – Part 2-3: Flow capacity – Test procedures. In addition, some aspects of CFD calculations are presented.
KEYWORDS
PAPER SUBMITTED: 2023-04-05
PAPER REVISED: 2023-05-28
PAPER ACCEPTED: 2023-06-12
PUBLISHED ONLINE: 2023-07-16
DOI REFERENCE: https://doi.org/10.2298/TSCI230405157I
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2024, VOLUME 28, ISSUE Issue 1, PAGES [579 - 587]
REFERENCES
  1. Asim, T., et al., Improved Design of a Multi-Stage Continuous-Resistance Trim for Minimum Energy Loss in Control Valves, Energy, 174 (2019), May, pp. 954-971
  2. Savić, Lj. R., et al., Sizing Valve Regulating Element, Proceedings, 8th Int. Cong. of Serbian Society of Mechanics, Kragujevac, Serbia, 2021, pp. 551-556
  3. ***, ISA-75.01.01-2014., Flow Equations for Sizing Control Valves, 2014
  4. ***, EN 60534-2-1: 2011., Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid-flow under installed conditions, 2011
  5. ***, ANSI/ISA-75.02.01-2008 (IEC 60534-2-3 Mod), Control Valve Capacity Test Procedures, 2008
  6. ***, DIN EN 60534-2-3., Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 65B/865/CD:2013), 2013
  7. Baumer, T., Fluid-Flow Measurements for the Disc Stack 20062008-155, Report on Testing, 2021

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence