THERMAL SCIENCE
International Scientific Journal
HEAT TRANSFER ANALYSIS OF DOUBLE TUBE HEAT EXCHANGER WITH WAVY INNER TUBE
ABSTRACT
The effect of the design on the heat transfer is numerically investigated by using the wavy inner tube in a double-pipe heat exchanger. A wavy inner tube was used in the design to give a turbulent effect to the fluid along the inner tube of a double tube heat exchanger. In numerical study, ANSYS 12.0 Fluent code program was used, and the basic protection equations were solved for steady-state, 3-D and turbulent flow conditions. The study was examined at Reynolds numbers ranging from 2700-5300. The obtained results were compared with the experimental data performed under the same conditions. As a result of this comparison, after it was seen that the results obtained from the numerical analysis and the experimental results were compatible with each other, the wave number of the inner tube was increased and analyzed with the ANSYS fluent code program. When the data obtained as a result of the analyzes were evaluated, it was seen that the highest heat transfer was obtained from the 16 wave tube heat exchanger, which has the highest number of waves and under counter flow conditions. The increase in heat transfer increased by 270% compared to the straight tube.
KEYWORDS
PAPER SUBMITTED: 2021-06-28
PAPER REVISED: 2021-07-17
PAPER ACCEPTED: 2021-07-23
PUBLISHED ONLINE: 2021-09-04
THERMAL SCIENCE YEAR
2022, VOLUME
26, ISSUE
Issue 4, PAGES [3455 - 3462]
- Heyhat, M.M., Abdi, A., Jafarzad, A., Performance Evaluation and Exergy Analysis of a Double Pipe Heat Exchanger Under Air Bubble Injection, Applied Thermal Engineering, 143(2018), pp.582-593
- Kumar, R., Chandra, P., Thermal Analysis of Compact Shell and Wire Coil-İnserted Helical Coil Tube Heat Exchanger, International Journal Ambient Energy (2019), Doi: doi.org/10.1080/01430750.2019.1684992
- Serageldin, A.A., Sakata, Y., Katsura, T., Nagano, K., Thermo-Hydraulic Performance of The U-Tube Borehole Heat Exchanger with a Novel Oval Cross-Section: Numerical Approach, Energy Conversion and Management, 177 (2018), pp.405-406
- Padmanabhan, S., Reddy, O. Y., Yadav, K.V.A.K., Raja, V.K.B., Palanikumar, K., Heat Transfer Analysis of Double Tube Heat Exchanger With Helical Inserts, Materials Today: Proceedings, (2021) Doi :doi.org/10.1016/j.matpr.2021.01.337
- Xiong, O., Izadi, M., Rad, M.S., Shehzad, S.A., Mohammed, H.A., 3D Numerical Study of Conical and Fusiform Turbulators for Heat Transfer Improvement in a Double-Pipe Heat Exchanger, International Journal of Heat and Mass Transfer, 170 (2021), pp.120-995
- Vivekanandan, M., Saravanan, G., Vijayan, V., Gopalakrishnan, K., Krishna, J.P., Experimental and CFD Investigation of Spiral Tube Heat Exchanger, Materials Today: Proceedings, 37 (2021) pp.3689-3696
- Altwieb, M., Kubiak, K.J., Aliyu, A.M., Mishra, R., A New Three-Dimensional CFD Model for Efficiency Optimisation of Fluid-Toair Multi-Fin Heat Exchanger, Thermal Science and Engineering Progress, 19 (2020) pp.100-658
- Doğan, S., Darici, S., Ozgoren, M., Numerical Comparison of Thermal And Hydraulic Performances for Heat Exchangers Having Circular and Elliptic Cross-Section, International Journal of Heat and Mass Transfer, 145 (2019) pp.118731
- Abeykoon, C., Compact Heat Exchangers - Design and Optimization with CFD, International Journal of Heat and Mass Transfer, 146 (2020) pp.118766
- Maakoul, A., Laknizi, A., Saadeddine, S., Abdellah, A., Meziane, A., Metoui A., Numerical Design and Investigation of Heat Transfer Enhancement and Performance for an Annulus with Continuous Helical Baffles In a Double-Pipe Heat Exchanger, Energy Conversion and Management, 133(2017) pp.76-86
- Çakmak, G., Yücel, H.L., Argunhan, Z., Yıldız, C., Experimental Investigation of Thermal Performance in a Concentric-Tube Heat Exchanger with Wavy Inner Pipe, International Journal Thermophys 33 (2012) pp.1055-1067
- Budak, N., Yücel, H.L., Argunhan, Z., Experimental and Numerical Investigation of the Effect of Turbulator on Heat Transfer in a Concentric-type Heat Exchanger, Experimental Heat Transfer 29 (2016) pp.322-336