THERMAL SCIENCE
International Scientific Journal
METALLIC PLATE HEATING BY A FLAT BURNER: EXPERIMENTS AND CFD SIMULATIONS
ABSTRACT
Metal plate heating by new microflare burner has been studied experimentally and by CFD simulations, additionally, concentrations of NOx were measured to compare conventional and microflare burners. In addition, the article provides a numerical simulation of the combustion of a microflame burner. It has been demonstrated that microflare burners are more efficient and allows more uniform heating of metal plates. The comparison of NOx concentrations of conventional and microflare burners indicate better performance of the latter.
KEYWORDS
PAPER SUBMITTED: 2021-04-19
PAPER REVISED: 2021-08-18
PAPER ACCEPTED: 2021-08-22
PUBLISHED ONLINE: 2021-10-10
THERMAL SCIENCE YEAR
2022, VOLUME
26, ISSUE
Issue 2, PAGES [1959 - 1969]
- Dostiyarov A.M. Development of fuel-burning arrangement with microflame burning and method of calculation, Doctoral thesis, Almaty, 2000, (in Russian)
- Umyshev D.R., Dostiyarov A.M., et al., Effects of different fuel supply types on combustion characteristics behind group of V-gutter flame holders: Experimental and numerical study, Thermal Science, Vol. 24, 2020, pp. 379-391.
- Umyshev D.R., Dostiyarov A.M., et al., Experimental investigation of distance between v-gutters onx flame stabilization and NOx emissions, Thermal Science, Vol. 23 (Part 5B), 2019, pp. 2971-2981.
- Pchelkin Y.M., Gas turbine combustion chambers, Energya, Moscow, 1984. (in Russian language).
- Dostiyarov, A.M., et al., Results of investigation of the GTE combustion chamber with a two-stage burner, Revista Espacios, 39 (24), pp. 33.
- Dostiyarov A.M., Kibarin A.A., Tumanov M.E. The determination of flame stabilization with microflame burning. South-Kazakhstan university herald, 2000, pp.67-69.
- Jithin Edacheri Veetil, et al., Effect of hole pattern on the structure of small scale perorated plate burner flames, Fuel, Vol. 216, (2018), pp.722-733.
- Vijaykumar Hindasageri, et al., An experimental and numerical investigation of heat transfer distribution of perforated plate burner flames impinging on a flat plate, International Journal of Thermal Sciences, Vol. 94, (2015), pp.156-169.
- Sherif S. Rashwan, et al., Experimental investigation of partially premixed methane-air and methane-oxygen flames stabilized over a perforated-plate burner, Applied Energy, Vol.169, (2016), pp. 126-137.
- Anna-Karin Jannasch, et al., Development of a novel catalytic burner for natural gas combustion for gas stove and cooking plate applications, Catalysis Today, Vol. 117, Issue 4, (2006), pp. 433-437.
- Lopez-Ruiz, I. Alava, J.M. Blanco, Study on the feasibility of the micromix combustion principle in low NOx H2 burners for domestic and industrial boilers: A numerical approach, Energy, Vol. 236, 2021, p.121456.
- A.A. Araoye et al., On the quality of micromixing in an oxy-fuel micromixer burner for gas turbine applications: A numerical study, Chemical Engineering and Processing - Process Intensification, Vol. 162, (2021), pp.108336
- Mohammad Hossein et al., Numerical study of geometric parameters effecting temperature and thermal efficiency in a premix multi-hole flat flame burner, Energy, Vol.125, (2017), pp.654-662.
