ABSTRACT
The NOx produced from industrial facilities is a serious environmental problem in China. In this work, the NOx emission from the combustion of natural gas in the sidewall burner was investigated by using CFD method. To achieve the low NOx emission, the sidewall burner structure was optimized involving the width of the primary premixed gas outlet, the secondary fuel gas nozzles number and angular spacing. The mixing rate of fuel gas and air could be improved by increasing the width of primary premixed gas outlet, and the lowest NOx emission of 32.8 ppm was achieved at the width of 8 mm. The NOx emission was remarkably reduced with the increasing of nozzles number, where 28.33 ppm of NOx emission and 357.35 ppm of CO were obtained at four nozzles. The combustion performance and NOx emission was improved as well as NOx emission was reduced at the angular spacing of 55°, compared to that of 30°, 35°, 40°, 45°, 50°, and 60°.
KEYWORDS
PAPER SUBMITTED: 2020-09-16
PAPER REVISED: 2020-12-01
PAPER ACCEPTED: 2020-12-03
PUBLISHED ONLINE: 2021-02-06
THERMAL SCIENCE YEAR
2022, VOLUME
26, ISSUE
Issue 1, PAGES [247 - 258]
- Wang, Y.Q., et al., Experimental investigation of the characteristics of NOx emissions with multiple deep air-staged combustion of lean coal, Fuel, 280 (2020), 118416
- Abbasi, T., et al., Acid rain: past, present, and future, International Journal of Environmental Engineering, 5 (2013), 3, pp. 229-272
- Su, Y., et al., An Overview of Low NOx Gas Combustion Technology and Burner Design, Industrial Boiler, 4 (2016), pp. 17-25
- Houshfar, E., et al., Effect of Excess Air Ratio and Temperature on NOx Emission from Grate Combustion of Biomass in the Staged Air Combustion Scenario, Energy & Fuels, 25 (2011), 10, pp. 4643-4654
- Li, Z., et al., Combustion and NOx emission characteristics of a retrofitted down-fired 660 MWe utility boiler at different loads, Applied Energy, 88 (2011), 7, pp. 2400-2406
- Changyeop, L., et al., An Experimental Study on Industrial Boiler Burners Applied Low NOx Combustion Technologies, Journal of Clean Energy Technologies, (2016), pp. 430-434
- Gupta, A.K., Lilley, D.G., Syred, N., Swirl Flows, Abacus Press, London, 1984
- Nhan, H.K., et al., CFD investigation of NOx reduction with a flue-gas internal recirculation burner in a mid-sized boiler, Journal of Mechanical ence and Technology, 33 (2019), 6, pp. 2967-2978
- Chen, S., et al., CFD investigation on Low-NOx strategy of folded flame pattern based on fuel-staging natural gas burner, Applied Thermal Engineering, 112 (2017), pp. 1487-1496
- Iyogun, C.O., et al., Experimental investigation of the effect of fuel nozzle geometry on the stability of a swirling non-premixed methane flame, Fuel, 90 (2011), 4, pp. 1416-1423
- Fan, C., et al., Experimental study of sidewall effect on flame characteristics of heptane pool fires with different aspect ratios and orientations in a channel, Proceedings of the Combustion Institute, 36 (2017), 2, pp. 3121-3129
- Eric, A., et al., Experimental and numerical study on combustion of baled biomass in cigar burners and effects of flue gas recirculation, Thermal Science, 20 (2016), Suppl. 1, pp. 151-165
- Guo, C., et al., Effect of fuel injection characteristics on the performance of a free-piston diesel engine linear generator: CFD simulation and experimental results, Energy Conversion and Management, 160 (2018), pp. 302-312
- Khalilarya, S., Lotfiani, A.. Determination of flow pattern and its effect on NOx emission in a tangentially fired single chamber square furnace, Thermal Science, 14 (2010), 2, pp. 493-503
- Goh, E., et al., Modeling of Minimum NOx in Staged-Combustion Architectures at Elevated Temperatures, Asme Turbo Expo: Turbomachinery Technical Conference & Exposition, 2017
- Álvarez, L., et al., Oxy-coal combustion in an entrained flow reactor: Application of specific char and volatile combustion and radiation models for oxy-firing conditions, Energy, 62 (2013), pp. 255-268
- Soete, G.G.D. Overall reaction rates of NO and N2 formation from fuel nitrogen, Symposium on Combustion, 15 (1975), 1, pp. 1093-1102
- Kim, J.P., et al.,2008. Comparison of different global reaction mechanisms for mild combustion of natural gas, Combustion Science and Technology, 180 (2008), 4, pp. 565-592.
- Novosselov, I.V., et al., Development and Application of an Eight-Step Global Mechanism for CFD and CRN Simulations of Lean-Premixed Combustors, Journal of Engineering for Gas Turbines & Power, 130 (2008), 2, pp. 769-779
- Taniguchi, M., et al., Comparison of staged combustion properties between bituminous coals and a low-rank coal; Fiber-shaped crystallized carbon formation, NOx emission and coal burnout properties at very high temperature, Combustion & Flame, 160 (2013), 10, pp. 2221-2230
- Shih, T.H., et al., A new eddy k-ε viscosity model for high Reynolds number turbulent flows, Computer & Fluids, 24 (1995), 3, pp. 227-238
- Jovanovic, R., et al., Experimental and numerical investigation of flame characteristics during swirl burner operation under conventional and oxy-fuel conditions, Thermal Science, 21 (2016), pp. 325-325
- Farokhi, M., Birouk M., A new EDC approach for modeling turbulence/chemistry interaction of the gas-phase of biomass combustion, Fuel, 220 (2018), pp. 420-436
- Lupant, D., Lybaert, P., Assessment of the EDC combustion model in MILD conditions with in-furnace experimental data, Applied Thermal Engineering, 75 (2015), pp. 93-102
- García, A.M., et al., Combustion model evaluation in a CFD simulation of a radiant-tube burner, Fuel, 276 (2020), 118013
- Vaid, H.S., et al., A run time combustion zoning technique towards the EDC approach in large-scale CFD simulations, International Journal of Numerical Methods for Heat & Fluid Flow, 24 (2013), 1, pp. 21-35
- Habibi, A., et al., Multiscale modeling of turbulent combustion and NOx emission in steam crackers, AIChE Journal, 53 (2010), 9, pp. 2384-2398
- Bulysova, L.A., et al., Parametric Computational Studies of NOx Emission Reduction in Staged Combustion of Ideal Fuel-Air Mixtures, Power Technology and Engineering 52 (2018), 2, pp. 1-7
- Terasaki, T., et al., The effects of fuel-air mixing on NOx formation in non-premixed swirl burners, Symposium on Combustion, 26 (1996), 2, pp. 2733-2739
- Cuoci, A., et al., The ignition, combustion and flame structure of carbon monoxide/hydrogen mixtures. Note 2: Fluid dynamics and kinetic aspects of syngas combustion, International Journal of Hydrogen Energy, 32 (2007), 15, pp. 3486-3500
- Yang, X., et al., Numerical investigation on the mixing process in a steam ejector with different nozzle structures, International Journal of Thermal Sciences, 56 (2013) , pp. 95-106
- Fu, Z., et al., Generation characteristics of thermal NOx in a double-swirler annular combustor under various inlet conditions, Energy, 200 (2020), 117487
- Schluckner, C., et al., Fast and accurate CFD-model for NOx emission prediction during oxy-fuel combustion of natural gas using detailed chemical kinetics, Fuel, 264 (2020), 15, 116841
- Chen, H., et al., Combustion and NOx Emission Behavior of Chinese Coals, Chinese Journal of Chemical Engineering, 10 (2002), 3, pp. 333-338
- Yan, Y., et al., Influence of oxygen concentration on combustion characteristics of inferior coal and sludge mixture, Journal of Fuel Chemistry and Technology, 41 (2013) , pp. 430-435