## THERMAL SCIENCE

International Scientific Journal

### HEAT TRANSFER ENHANCEMENT INSIDE CHANNEL BY USING THE LATTICE BOLTZMANN METHOD

**ABSTRACT**

In this study, the Lattice Boltzmann Method (LBM) is employed in order to examine the fluid flow and forced convection heat transfer inside a two-dimensional horizontal channel with and without obstacles. In order to enhance the heat and thermal energy transfer within the channel, different obstacle arrangements are posed to the flow field and heat transfer with the purpose of studying their sensitivity to these changes. The results indicate that, when the value of the Reynolds number is maximum, the maximum average Nusselt numbers happens on the lower wall (Case 4). The paper extends the topic to the use of nanofluids to introduce a possibility to enhancement of the heat transfer in the channel with an array of the obstacles with forced convection. For this purpose, the AgMgO/water micropolar hybrid nanofluid is used, and the volume fraction of the nanoparticle (50% Ag and 50% MgO by volume) is set between 0 and 0.02. The results showed that, when the hybrid nanofluid is used instead of a typical nanofluid, the rate of the heat transfer inside the channel increases, especially for the high values of the Reynolds number, and the volume fraction of the nanoparticles. Increasing the volume fraction of the nanoparticles increase the local Nusselt number ( 1.17-fold). It is shown that the type of obstacle arrangement and the specific nanofluid can exerts significant effects on the characteristics of the flow field and heat transfer in the channel. This study provides a platform for using the LBM to examine fluid flow through discrete obstacles in offset positions.

**KEYWORDS**

PAPER SUBMITTED: 2019-09-19

PAPER REVISED: 2019-11-24

PAPER ACCEPTED: 2020-02-18

PUBLISHED ONLINE: 2020-03-08

**THERMAL SCIENCE** YEAR

**2021**, VOLUME

**25**, ISSUE

**Issue 5**, PAGES [3543 - 3555]

- Jubran, B. A., et al., Convective Heat Transfer and Pressure Drop Characteristics of Various Array Configurations to Simulate the Cooling of Electronic Modules, International Journal of Heat and Mass Transfer, 39 (1996), 16, pp. 3519-3529
- Korichi. A., et al., Numerical Heat Transfer in a Rectangular Channel with Mounted Obstacles on Upper and Lower Walls, International Journal of Thermal Sciences, 44 (2005), 7, pp. 644-655
- Pirouz, M.M., et al., Lattice Boltzmann Simulation of Conjugate Heat Transfer in a Rectangular Channel with Wall-Mounted Obstacles, Scientia Iranica, 18 (2011), 2, pp. 213-221
- Gareh, S., Numerical Heat Transfer in a Rectangular Channel with Mounted Obstacle, International Letters of Chemistry, Physics and Astronomy, 19 (2014), 2, pp. 111-119
- M. Toumi1, et al., Three-Dimensional Study of Parallel Shear Fow Around an Obstacle in Water Channel and air Tunnel, Mechanics & Industry, 18 (2017), 505, pp. 13
- Kanna, M. S., et al., Investigation of Forced Convection Heat Transfer from a Block Located Staggered Cavity with Parallel and Anti-Parallel Wall Motion, Thermal Science, 23 (2019), 4, pp. S1281-S1380
- Dubovsky, V. and R. Letan., Air Forced Convection over Two-Side Plate Extended by Rectangular Hollow Blocks, Thermal Science, 23 (2019), 4, pp. S1251-S1260
- Sahid, NSM., et al., Neural Network Modeling of Grinding Parameters of Ductile Cast Iron Using Minimum Quantity Lubrication, International Journal of Automotive and Mechanical Engineering, 1 (2015), 11, pp. 2608-21
- Najiha, MS., Rahman, MM., Experimental Study on Minimum Quantity Lubrication in end Milling of AA6061-T6 Using Tialn Coated Carbide Tools, International Journal of Automotive and Mechanical Engineering, 1 (2015), 11. pp.2771-85
- Choi, S., Developments and Applications of Non-Newtonian Flows, American Society of Mechanical Engineers, 66 (1995), pp. 99-105
- Yuan, Ma., et al., Study of Nanofluid Forced Convection Heat Transfer in a Bent Channel by Means of Lattice Boltzmann Method, International Journal of Heat and Mass Transfer, 30 (2018), 3, pp. 1291-1303
- Boulahia. Z., et al., Numerical Study of Natural and Mixed Convection in a Square Cavity Filled by a Cu-Water Nanofluid with Circular Heating and Cooling Cylinders, Mechanics & Industry, 18 (2017) 502, pp. 21-32
- Athinarayan, A., et al., Numerical Investigation of Heat Transfer from Flow over Square Cylinder Placed in a Confined Channel Using Cu- Water Nanofluid, Thermal Science, 23 (2019), 4, pp. S1367-S1380
- Syam Sundar. L., et al., Investigation of Thermal Conductivity and Viscosity of Fe3O4 Nanofluid for Heat Transfer Applications, International communications in heat and mass transfer, 44 (2013) , pp.7-14
- Leong K Y., et al., Synthesis and Thermal Conductivity Characteristic of Hybrid Nanofluids, Renewable and Sustainable Energy Reviwes, 75 (2017), pp. 868-878
- Wang, X., et al, Thermal Conductivity of Nanoparticle- Uid Mixture, J. Thermophys Heat Transfer, 13(1999), pp. 474-480
- Mollamahdi, M., et al., Flow field and heat transfer of MgO-Ag/water micropolar hybrid nanofluid in a permeable channel, Trans. Phenom. Nano Micro Scales, 6(,2018): pp. 13-26
- Ho, C.J., et al., Preparation and Properties of Hybrid Water-Based Suspension of Al2O3 Nanoparticles and MEPCM Particles as Functional Forced Convection Fluid, International Communications in Heat and Mass Transfer, 37 (2010), pp. 490-494
- Suresh, S., et al., Synthesis of Al2O3-Cu/Water Hybrid Nanofluids Using Two Step Method and Its Thermo Physical Properties, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 388 (2011), pp. 41-48
- Suresh, S., et al., Effect of Al2O3-Cu/Water Hybrid Nanofluid in Heat Transfer, Therm Fluid Sci, 38 (2012), pp. 54-60
- Abbasia, S., et al., The Effect of Functionalization Method on the Stability and the Thermal Conductivity of Nanofuid Hybrids of Carbon Nanotubes/Gamma Alumina, Ceramics International, 39(2013), pp. 3885-3891, 10.1016/j.ceramint.2012.10.232
- Balla, H., et al., Numerical Study of the Enhancement of Heat Transfer for Hybrid CuO-Cu Nanofluids owing in a Circular Pipe, Journal of Oleo Science, 62 (2013), pp. 533-539
- Takabi, B. and Salehi, S., Augmentation of the heat transfer performance of a sinusoidal corrugated enclosure by employing hybrid nano uid, Advances in Mechanical Engineering, 6(2014), pp. 1459-1470
- Moghadassi, A., et al., A numerical Study of Water Based Al2O3 and Al2O3- Cu Hybrid Nanofluid Effect on Forced Convective Heat Transfer, Int. J. Therm. Sci, 92 (2015), pp. 50-57
- Wolf-Gladrow, DA., Lattice-Gas Cellular Automata and Lattice Boltzmann Models. Springer, Berlin Heidelberg New York 9, 2000
- Shan, X., Chen, H., Lattice Boltzmann Model for Simulating Flows with Multiple Phases and Components, Phys Rev E, 47 (1993), pp. 1815-1819
- Shan, X., Doolen, G., Diffusion in a Multicomponent Lattice Boltzmann Equation Model, Phys Rev E, 54 (1996), pp. 3614-3620
- Yang, ZL., et al., Evaluation of the Darcy's Law Performance for Two-Fluid Hydrodynamics in a Particle Debris Bed Using a Lattice-Boltzmann Model, Heat Mass Transfer, (2000), 36, pp. 295-304
- Zhou, L., et a.l., Multiscale Simulation of Flow and Heat Transfer of Nanofluid with Lattice Boltzmann Method, Int J Multiph Flow, (2010), 36, pp. 364-74
- Boutra, A., et al., Free Convection Heat Transfer of Nanofluids into Cubical Enclosures with a Bottom Heat Source: Lattice Boltzmann Application, Science Direct, Energy Procsdia, 139 (2017), pp. 217-223
- Mohebbi, R.., et al., Lattice Boltzmann Method Based Study of the Heat Transfer Augmentation Associated with Cu/Water Nanofluid in a Channel with Surface Mounted Blocks, Int. J. Heat Mass Transfer, 117 (2018), pp. 425-435
- Izadi, M.., et al., Numerical Simulation of Natural Convection Heat Transfer Inside a ⊥ Shaped Cavity Filled by a MWCNT-Fe3O4/Water Hybrid Nanofluids Using LBM, Chem. Eng. Proces.: Process Intensif, 125 (2018), pp. 56-66
- Mohebbi, R., et al., Heat Source Location and Natural Convection in a C-Shaped Enclosure Saturated by a Nanofluid, Phys. Fluids, 29(2017), 122009
- Boutra, A, et al., Free Convection Heat Transfer of Nanofluids into Cubical Enclosures with a Bottom Heat Source: Lattice Boltzmann Application, Science Direct, Energy Procsdia, 139 (2017), pp. 217-223
- Mohebbi, R., et al., Lattice Boltzmann Simulation of Nanofluid Natural Convection Heat Transfer in a Channel with a Sinusoidal Obstacle, International Journal of Modern Physics, 29 (2018), 9, 1850079
- Mohebbi, R., et al., Enhancement of Heat Transfer of Nanofluids in the Presence of Sinusoidal Side Obstacles Between Two Parallel Plates Through the Lattice Boltzmann Method, International Journal of Mechanical Sciences, 156 (2019), pp. 159-169
- Frisch, U., et al., Lattice-Gas Automata for the Navier-Stokes Equation, Physical Review Letters, 56 (1986), pp. 1505-1508
- Frisch, U., et al., Lattice Gas Hydrodynamics in Two and Three Dimensions, Complex Systems, 1 (1987), pp. 649-707
- Mohamad, A. A., Applied Lattice Boltzmann Method for Transport Phenomena, Momentum, Heat and Mass Transfer, Calgary, 2007
- Sidik, N. A. C. and Mamat, R.., Recent Progress on Lattice Boltzmann Simulation of Nanofluids: A review, Int. J. Heat Mass Transfer, 66 (2015), pp. 11-22
- Khanafer, K., et al., Buoyancy-Driven Heat Transfer Enhancement in a Two Dimensional Enclosure Utilizing Nanofluids, Int. J.Heat Mass Transfer, 46 (2003), pp 3639-3653
- Zou, Q. and He, X., On Pressure and Velocity Boundary Conditions for the Lattice Boltzmann BGK Model, Phys. Fluids, 9(1997), pp. 1591-1598
- Mohamad, A. A., Lattice Boltzmann Method, Springer, 2011
- Santra, A. K., et al., Study of Heat Transfer due to Laminar Flow of Copper Water Nanofluid through Two Isothermally heated Parallel Plates, Int. J. Thermal Sciences, 48 (2009), pp. 391-400
- Bennacer, R. et al., Natural Convection of Nanofluids in a Cavity Including the Soret Effect, International Journal of Computational Thermal Sciences, 1(2009), 4, pp. 425-440