**ABSTRACT**

Particle collision is an important process in soot particle growth. In this research, based on gas-solid two-phase flow, particle trajectory was traced by the Lagrange approach with periodic boundaries. Trajectory intersection, collision probability, and critical velocity were considered, and the growth path of each particle was traced. The collision frequency, fc, agglomeration frequency, fa, and friction collision frequency, ffc, were calculated, and the main influence factors of particle collision were analyzed. The results showed that fc, fa, fa/fc increased with the increase of the particle volume fraction and gas phase velocity, v, but the particle initial diameter, dpi, and velocity had the great influence on fa/fc. fa/fc obviously decreased with the increase of dpi and v. The statistical analysis of fa/fc and Stokes number showed that fa/fc decreased with the increase of Stokes number, especially when Stokes number was extremely small, fa/fc decreased rapidly. Using the trajectory analysis of each particle, the particle growth process could be classified in three types: firstly, the particles that did not agglomerate with any particles during the entire calculation process, secondly, the particles that continually agglomerated with small particles to generate larger ones, and finally, the particles that were agglomerated by larger particles at some calculation moment.

**KEYWORDS**

PAPER SUBMITTED: 2019-11-10

PAPER REVISED: 2020-07-30

PAPER ACCEPTED: 2020-07-31

PUBLISHED ONLINE: 2020-08-08

**THERMAL SCIENCE** YEAR

**2021**, VOLUME

**25**, ISSUE

**Issue 5**, PAGES [3741 - 3752]

- Tao, F., et al., A Phenomenological Model for the Prediction of Soot Formation in Diesel Spray Combustion, Combustion and Flame, 136(2004), 3, pp. 270-282
- Zhao, F., et al., Numerical Modelling of Soot Formation and Oxidation Using Phenomenological Soot Modeling Approach in a Dual-fueled Compression Ignition Engine, Fuel, 188(2017), pp. 382-389
- Zhou, D. Z., et al., an Enhanced Primary Reference Fuel Mechanism Considering Conventional Fuel Chemistry in Engine Simulation, Journal Engineering for Gas Turbines and Power, 138(2016), No. 092804-1-8
- Mohaghegh, F., Udaykumar, H. S., Modeling Collisions of Arbitrary-shaped Particles in Simulations of Particulate Flows, Powder Technology, 344(2019), pp. 756-772
- Stübing, S., et al., Modelling Agglomeration and the Fluid Dynamic Behavior of Agglomerates, report No. AJK2011-12025, Proceedings of the ASME-JSME 2011 Joint Fluids Engineering Conference, Hamamatsu, Japan, July 24-29, 2011
- Yu, L., et al., Direct Numerical Simulation of Polydisperse Aerosol Particles Deposition in Low Reynolds Number Turbulent Flow, Annals of Nuclear Energy, 121(2018), pp. 223-231
- Karimi, M., Andersson, R., an Exploratory Study on Fluid Particles Breakup Rate Models for the Entire Spectrum of Turbulent Energy. Chemical Engineering Science, 192(2018), pp. 850-863
- Kittelsion, D., et al., Review of Diesel Particulate Matter Sampling Methods, Final Report University of Minnesota, MN, USA, 1999
- Wang, L., et al., Numerical Simulation of the Growth of Nanoparticles in a Flame CVD Process, China Particuology, 2(2004), 5, pp. 215-221
- Kazakov, A., Foster, D.E., Modeling of Soot Formation during DI Diesel Combustion using a Multi-step Phenomenological Model, SAE paper, paper No. 982463, 1998
- Frenklach, M., Wang, H., Detailed Modeling of Soot Particle Nucleation and Growth, Proceedings of the Combustion Institute, 23(1991), 1, pp. 1559-1566
- Shao, T., et al., Effect of Soot Model, Moment Method, and Chemical Kinetics on Soot Formation in a Model Aircraft Combustor, Proceeding of the Combustion Institute, 37(2019), 1, pp. 1065-1074
- Yan, B., Caflisch, R. E., A Monte Carlo Method with Negative Particles for Coulomb Collisions, Journal of Computational Physics, 298(2015), pp. 711-740
- Xiao, H., et al., An Experimental Study of the Combustion and Emission Performances of 2,5-dimethylfuran Diesel Blends on a Diesel Engine, Thermal Science, 21(2017), 1B, pp.543-553
- Ho, C. A., Sommerfeld, M., Modelling of Micro-particle Agglomeration in Turbulent Flows, Chemical Engineering Science, 57(2002), 15, pp. 3073-3084
- Laín, S., Sommerfeld, M., Characterization of Pneumatic Conveying Systems Using the Euler/Lagrange Approach, Powder Technology, 235(2013), pp. 764-782
- Ray, M., et al., An Euler-Euler Model for Mono-dispersed Gas-particle Flows Incorporating Electrostatic Charging due to Particle-wall and Particle-particle Collision, Chemical Engineering Science, 197(2019), pp. 327-344
- Saffman, P. G., Turner, J. S., On the Collision of Drops in Turbulent Clouds, Journal of Fluid Mechanics, (1956), 1, pp. 16-30
- Park, K. S., Heister, S. D., Modeling Particle Collision Processes in High Reynolds Number Flow, Journal of Aerosol Science, 66(2013), pp. 123-138
- Sommerfeld, M., Validation of a Stochastic Lagrangian Modeling Approach for Inter-particle Collision in Homogeneous Isotropic Turbulence, International Journal of Multiphase Flow, 27(2001), 10, pp. 1829-1858
- Jorge, H. O., On the Diffusion- controlled Rate Coefficient for Chemical Reactions and Collisions of Nano-particles, Chemical Engineering Science, 171(2017), pp. 481-484
- Meyer, D. W., Eggersdorfer, M. L., Simulating Particle Collisions in Homogeneous Turbulence with Kinematic Simulation - a Validation Study, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 454(2014), pp. 57-64
- Gui, N., et al., Numerical Study of Particle-particle Collision in Swirling Jets: A DEM-DNS coupling simulation, Chemical Engineering Science, 65(2010), 10, pp. 3268-3278
- Saini, N., Kleinstreuer, C., A New Collision Model for Ellipsoidal Particles in Shear Flow, Journal of Computational Physics, 376(2019), pp. 1028-1050
- Oesterle, B., Petitjean, a Simulation of Particle-to-particle Interaction in Gas-solid Flow, International Journal of Multiphase Flow, 19(1993), 1, pp. 199-211
- Ansys, Inc., Ansys Fluent User's Guide, www.ansys.com
- Alipchenkov, V. M., Zaichik, L. I., Particle Collision Rate in Turbulent Flow, Fluid Dynamics, 36(2001), 4, pp. 608-618