International Scientific Journal


In this paper, we introduced a numerical analysis for the effect of a magnetic field on the mixed convection and heat transfer inside a two-sided lid-driven cavity with convective boundary conditions on its adjacent walls under the effects of the presence of thermal dispersion and partial slip. A single-phase model in which the water is the base fluid and a copper is nanoparticles is assumed to represent the nanofluid. The bottom and top walls of the cavity move in the horizontal direction with constant speed, while the vertical walls of the cavity are stationary. The right wall is mentioned at relatively low temperature and the top wall is thermally insulated. Convective boundary conditions are imposed to the left and bottom walls of the cavity and the thermal dispersion effects are considered. The finite volume method is used to solve the governing equations and comparisons with previously published results are performed. It is observed that the increase in the Hartmann number causes that the shear friction near the moving walls is enhanced and consequently the horizontal velocity component decreases.
PAPER REVISED: 2019-11-26
PAPER ACCEPTED: 2020-03-25
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2021, VOLUME 25, ISSUE Issue 3, PAGES [1703 - 1717]
  1. Chol, S., Eastman, J. A., Enhancing Thermal Conductivity of Fluids with Nanoparticles, ASME-Publications-Fed, 231 (1995), Jan., pp. 99-106
  2. Eastman, J. A., et al., Anomalously Increased Effective Thermal Conductivities of Ethylene Glycol-Based Nanofluids Containing Copper Nanoparticles, Applied Physics Letters, 78 (2001), 6, pp. 718-720
  3. Mansour, M. A., et al., Numerical Simulation of Mixed Convection Flows in a Square Lid-Driven Cavity Partially Heated from below Using Nanofluid, International Communications in Heat and Mass Transfer, 10 (2010), 10), pp. 1504-1512
  4. Mansour, M., Ahmed, S. E., Mixed Convection in Double Lid-Driven Enclosures Filled With Al2O3-Water Nanofluid, Journal of Thermophysics and Heat Transfer, 27 (2013), 4, pp. 707-718
  5. Hayat, T., et al., Comparative Study of Silver and Copper Wnanofluids with Mixed Convection and Non-Linear Thermal Radiation, International Journal of Heat and Mass Transfer, 102 (2016), Nov., pp. 723-732
  6. Chen, B.-S., Liu, C.-C., Entropy Generation in Mixed Convection Magnetohydrodynamic Nanofluid-Flow in Vertical Channel, International Journal of Heat and Mass Transfer, 91 (2015), Dec., pp. 1026-1033
  7. Selimefendigil, F., Oztop, H. F., Analysis of MHD Mixed Convection in a Flexible Walled and Nanofluids Filled Lid-Driven Cavity with Volumetric Heat Generation, International Journal of Mechanical Sciences, 118 (2016), Nov., pp. 113-124
  8. Rashidi, M. M., et al., Numerical Investigation of Magnetic Field Effect on Mixed Convection Heat Transfer of Nanofluid in a Channel with Sinusoidal Walls, Journal of Magnetism and Magnetic Materials, 401 (2016), Mar., pp. 159-168
  9. Hsiao, K.-L., Stagnation Electrical MHD Nanofluid Mixed Convection with Slip Boundary on a Stretching Sheet, Applied Thermal Engineering, 98 (2016), Apr., pp. 850-861
  10. Sankar, M., et al., Natural-Convection in a Non-Uniformly Heated Vertical Annular Cavity, Defect and Diffusion Forum, 377 (2017), Sept., pp. 189-199
  11. Mahajan, A., et al., Penetrative Internally Heated Convection in Magnetic Fluids, Defect and Diffusion Forum, 387 (2018), Sept., pp. 373-384
  12. Das, S., et al., Influence of Wall Conductivities on a Fully Developed Mixed-Convection Magnetohydrodynamic Nanofluid-Flow in a Vertical Channel, Journal of Engineering Physics and Thermophysics, 91 (2018), 3, pp. 784-796
  13. Ismael, M. A., et al., Mixed Convection in a Nanofluid Filled-Cavity with Partial Slip Subjected to Constant Heat Flux and Inclined Magnetic Field, Journal of Magnetism and Magnetic Materials, 416 (2016.), Suppl. C, pp. S25-S36
  14. Rashad, A. M., et al., The MHD Mixed Convection of Localized Heat Source/Sink in a Nanofluid-Filled Lid-Driven Square Cavity with Partial Slip, Journal of the Taiwan Institute of Chemical Engineers, 68 (2016.), Suppl. C, pp. S173-S186
  15. Hayat, T., et al., Investigation of Hall Current and Slip Conditions on Peristaltic Transport of Cu-Water Nanofluid in a Rotating Medium, International Journal of Thermal Sciences, 112 (2017), Feb., pp. 129-141
  16. Alsabery, A., et al., Transient Free Convective Heat Transfer in Nanoliquid-Saturated Porous Cquare Cavity with a Concentric Solid Insert and Sinusoidal Boundary Condition, Superlattices and Microstructures, 100 (2016), Dec., pp. 1006-1028
  17. Djoko, J., Koko, J., Numerical Methods for the Stokes and Navier-Stokes Equations Driven by Threshold Slip Boundary Conditions, Computer Methods in Applied Mechanics and Engineering, 305 (2016), June, pp. 936-958
  18. Abbas, Z., Sheikh, M., Numerical Study of Homogeneous-Heterogeneous Reactions on Stagnation Point Flow of Ferrofluid with Non-Linear Slip Condition, Chinese Journal of Chemical Engineering, 25 (2017), 1, pp. 11-17
  19. Akbar, N. S., Khan, Z. H., Effect of Variable Thermal Conductivity and Thermal Radiation with CNTS Suspended Nanofluid over a Stretching Sheet with Convective Slip Boundary Conditions: Numerical study, Journal of Molecular Liquids, 222 (2016), Oct., pp. 279-286
  20. Mansour, M., et al., Fluctuating Thermal and Mass Diffusion on Unsteady MHD Convection of a Micro Polar Fluid through a Porous Medium Past a Vertical Plate in Slip-Flow Regime, International Journal of Applied Mathematics and Mechanics, 3 (2007), pp. 99-117
  21. Murthy, P., et al., Magnetic Effect on Thermally Stratified Nanofluid Saturated Non-Darcy Porous Medium under Convective Boundary Condition, International Communications in Heat and Mass Transfer, 47 (2013), Oct., pp. 41-48
  22. Aziz, A., A Similarity Solution for Laminar Thermal Boundary-Layer over a Flat Plate with a Convective Surface Boundary Condition, Communications in Non-Linear Science and Numerical Simulation, 14 (2009), 4, pp. 1064-1068
  23. Makinde, O. D., Aziz, A., Boundary-Layer Flow of a Nanofluid Past a Stretching Sheet with a Convective Boundary Condition, International Journal of Thermal Sciences, 50 (2011), 7, pp. 1326-1332
  24. Ishak, A., Similarity Solutions for Flow and Heat Transfer over a Permeable Surface with Convective Boundary Condition, Applied Mathematics and Computation, 217 (2010), 2, pp. 837-842
  25. Bachok, N., et al., Flow and Heat Transfer at a General 3-D Stagnation Point in a Nanofluid, Physica B: Condensed Matter, 405 (2010), 24, pp. 4914-4918
  26. Ahmad, S., Pop, I., Mixed Convection Boundary-Layer Flow from a Vertical Flat Plate Embedded in a Porous Medium Filled with Nanofluids, International Communications in Heat and Mass Transfer, 37 (2010), 8, pp. 987-991
  27. Bataller, R. C., Similarity Solutions for Flow and Heat Transfer of a Quiescent Fluid over a Non-Linearly Stretching Surface, Journal of Materials Processing Technology, 203 (2008), 1-3, pp. 176-183
  28. Ahmed, S. E., Mixed Convection in Thermally Anisotropic Non-Darcy Porous Medium in Double Lid-Driven Cavity Using Bejan's Heatlines, Alexandria Engineering Journal, 55 (2016), 1, pp. 299-309
  29. Iwatsu, R., et al., Mixed Convection in a Driven Cavity with a Stable Vertical Temperature Gradient, International Journal of Heat and Mass Transfer, 36 (1993), 6, pp. 1601-1608
  30. Khanafer, K. M., Chamkha, A. J., Mixed Convection Flow in a Lid-Driven Enclosure Filled with a Fluid-Saturated Porous Medium, Int. J. Heat Mass Transfer, 42 (1999), 13, pp. 2465-2481

© 2022 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence