International Scientific Journal

Authors of this Paper

External Links


The critical heat flux occurring during upflow of boiling water in vertical smooth and porous-coated tubes were investigated experimentally. The experiments were performed at low pressures from 0.11-0.7 MPa and at mass fluxes from 100-400 kg/m2s, with inlet subcoolings from 1-70 K. The experiments were carried out with four test sections, two of which were porous coated by sintering. The two tubes in each of the cases, porous and smooth, had the same geometries (L/D = 28.3, L/D = 38.75) to ensure a direct comparison of the measured data in the porous-coated tubes with those of the smooth tubes. In addition, the critical heat flux data for water in uniformly heated vertical porous-coated tubes were obtained from the literature. These experiments were conducted using two smooth and four inner porous-coated tubes (L/D = 14.1, L/D = 50) in the same experimental set-up used in the present study. In general, it was found that the critical heat flux decreased with an increase in the L/D ratio for both the smooth and porous-coated tubes. The effect of porous coating on critical heat flux can be positive, negative, or even neutral.
PAPER ACCEPTED: 2019-01-04
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2021, VOLUME 25, ISSUE Issue 1, PAGES [613 - 623]
  1. Body, R.D., Subcooled Flow Boiling Critical Heat Flux (CHF) and its Application to Fusion Energy Components, Part 1: A Review of Fundamentals of CHF and Related Database, Fusion Technology 7 (1985) pp.7-30.
  2. Incropera, F.P., DeWitt, D.P., Fundamentals of Heat and Mass Transfer, Fourth Edition, John Wiley and Sons, 1996.
  3. Celata, G.P., et al., Geometrical Effects on the Subcooled Flow Boiling Critical Heat Flux, Rev. Gen. Therm. Vol. 36 (1997) pp.807 - 814.
  4. Tanase, A., Improved methodology for deriving the Critical Heat Flux Look-Up Table. Master of Applied Science. University of Ottawa, Ottawa, Canada, May 2007.
  5. Collier, J.G., Thome, J.R., Convective Boiling and Condensation. Third edition, Oxford Unversity Press, 1994.
  6. Mastrullo, R., et al., Experimental CHF for low-GWP fluids and R134a. Effect of the Lh/D ratio at low and high mass velocities. International Journal of Heat and Mass Transfer 109 (2017) pp.1200-1216.
  7. Sudo, Y., Effect of channel length on Critical Heat Flux under conditions of high subcooling and high velocity in short heated channels. Heat Transfer-Japanese Research 27 (7) (1998) pp.509-521.
  8. Mudawar, L., et al., Ultra-high critical heat fux (CHF) for subcooled water flow boiling-I: CHF data and parametric effects for small diameter tubes. International Journal of Heat and Mass Transfers 42 (1999) pp.1405-1428.
  9. Lee, Y.H., et al., A correction method for heated length effect in critical heat flux prediction. Nuclear Engineering and Design 199 (2000) pp.1-11.
  10. Roday, A.P., et al., A review of the critical heat flux condition in mini-and microchannels. Journal of Mechanical Science and Technology 23 (2009) pp.2529-2547.
  11. Wu, Z., et al., A new predictive tool for saturated critical heat flux in micro/mini-channels: effect of the heated length-to-diameter ratio. International Journal of Heat and Mass Transfers 54 (2011) pp.2880-2889.
  12. Kovalev, S.A., et al., Heat Transfer in the Boiling of Water on a Porous Surface in an Annular Channel, High Temperature 26 (1988) pp.712-717.
  13. Leont'ev, A.I., et al., Experimemtal Study of Heat-Transfer Burnout in Horizontal Steam- Generating Channels with a Porous Inner Lining and Circumferentially Nonuniform Heating, High Temperature 20 (1982) pp.897-901.
  14. Kovalev, S.A., et al., Liquid Boiling on Porous Surfaces, Heat Transfer-Soviet Research 19 (3) (1987).
  15. Kotov, S.A., et al., Burnout in Steam-Generating Channels with Porous Coatings, High Temperature 30 (1992) pp.640-645.
  16. Zuev, A.V., et al., Dry-Out Phenomena at Two-Phase Flows in Tubes with Porous Coatings, in: Proceedings of 10th International Heat Transfer Conference, Brighton UK, 6, 1994, pp.147-150.
  17. Dawidowicz, B., et al., Heat transfer and pressure drop during flow boiling of pure refrigerants and refrigerant/oil mixtures in tube with porous coating. International Journal of Heat and Mass Transfers 55 (2012) pp.2549-2558.
  18. Mel'nikov, V.N., et al., Experimental Study of the Effect of Ferric-Oxide Scale on the Critical Heat Flux in Forced-Convection Boiling of Water, Heat Transfer-Soviet Research 11 (3) (1979) pp.36-39.
  19. Yildiz, S., Experimentelle Untersuchung der kritischen Wärmestromdichte im Übergang von DNB- zum Dryout-Mechanismus in glatten und porös beschichteten Rohren bei niedrigen Drücken und Massenstromdichten, Köster, PhD thesis, Band 5, 1998.
  20. Stein, M., Systematische Untersuchung der kritischen Wärmestromdichte beim Strömungssieden von Wasser in lotrechten Kreisrohren mit und ohne poröser Beschichtung. PhD thesis, Technical University of Berlin, 2004.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence