ABSTRACT
Gas turbine combustor performance was explored by utilizing a 1-D flow network model. To obtain the preliminary performance of combustion chamber, three different flow network solvers were coupled with a chemical reactor network scheme. These flow solvers were developed via simplified, segregated and direct solutions of the nodal equations. Flow models were utilized to predict the flow field, pressure, density and temperature distribution inside the chamber network. The network model followed a segregated flow and chemical network scheme, and could supply information about the pressure drop, nodal pressure, average temperature, species distribution, and flow split. For the verification of the model’s results, analyses were performed using CFD on a seven-stage annular test combustor from TUSAS Engine Industries, and the results were then compared with actual performance tests of the combustor. The results showed that the preliminary performance predictor code accurately estimated the flow distribution. Pressure distribution was also consistent with the CFD results, but with varying levels of conformity. The same was true for the average temperature predictions of the inner combustor at the dilution and exit zones. However, the reactor network predicted higher elemental temperatures at the entry zones.
KEYWORDS
PAPER SUBMITTED: 2018-06-02
PAPER REVISED: 2018-08-15
PAPER ACCEPTED: 2018-08-16
PUBLISHED ONLINE: 2018-09-30
THERMAL SCIENCE YEAR
2020, VOLUME
24, ISSUE
Issue 3, PAGES [1977 - 1989]
- Lefebvre, A.H., Ballal, D.R., Gas Turbine Combustion, CRC Press, 3rd ed., 2010
- Walsh, P.P., Fletcher, P., Gas Turbine Performance, Blackwell Science, 2nd ed., 2004
- Boyce, M.P., Gas Turbine Engineering Handbook, Gulf Professional Publishing 3rd ed., 2006
- Greyvenstein, G.P., Laurie, D.P., A Segregated CFD Approach to Pipe Network Analysis, International Journal for Numerical Methods in Engineering, 37: 3685-3705, 1999
- Liu, H., Pipeline Engineering, Lewis Publishers, 2003
- Stuttaford, P.J., Preliminary Gas Turbine Combustor Design Using a Network Approach, Ph.D. thesis, School of Mechanical Engineering, Cranfield University, UK 1997
- Dupuis, P., et al., A Modified Element Method for Pipe Network Analysis, Journal of Hydraulic research, 25:1 (1987)
- Costa, A.L.H., et al., Steady-State Modeling and Simulation of Pipeline Networks for Compressible Fluids, Braz. J. Chem. Eng., 15: 4 (1998)
- Krope, J., et al., Flow Pressure Analysis of Pipe Networks with Linear Theory Method, Proceedings, International Conference on Fluid Mechanics, 2006, pp. 59-62
- Krope, J., et al., Flow-Pressure Analysis of Loop Gas Networks, International Journal of Systems Applications, Engineering & Development, 4: 5 (2011)
- Jeppson, R.W., Steady Flow Analysis of Pipe Networks: An Instructional Manual, Report, Utah Water Research Laboratory, USA, 1974
- Stuttaford, P.J., Rubini, P.A., Preliminary Gas Turbine Combustor Design Using a Network Approach, ASME Journal of Engineering for Gas Turbines and Power, 119: 546-552 (1997)
- Pretorius, J.J., A Network Approach for The Prediction of Flow and Flow Splits within a Gas Turbine Combustor, M.Sc. thesis, Faculty of Engineering, University of Pretoria, SA, 2005
- Pretorius, J.J., et al., A Flow Network Formulation for Compressible and Incompressible Flow, International Journal of Numerical Methods for Heat & Fluid Flow, 18: 2: 185-201 (2008)
- Tabkhi, F., et al., Total Cost Minimization of a High-Pressure Natural Gas Network, Journal of Energy Resources Technology, 131 (2009)
- Tabkhi, F., et al., Improving the Performance of Natural Gas Pipeline Networks Fuel Consumption Minimization Problems, AICHE Journal, 56: 4: 946-964 (2010)
- Hataysal, E.H., A Coupled Flow and Chemical Reactor Network Model for Predicting Gas Turbine Combustor Performance, Ph.D. thesis, Mechanical Engineering Department, Middle East Technical University, Turkey, 2016
- Murthy, J.N., Gas Turbine Combustor Modelling for Design, Ph.D. thesis, School of Mechanical Engineering, Cranfield University, UK, 1988
- Falcitelli, M., et al., CFD+Reactor Network Analysis: An Integrated Methodology for The Modeling and Optimisation of Industrial Systems for Energy Saving and Pollution Reduction, Applied Thermal Engineering, 22: 971-979 (2002)
- Fichet, V., et al., A Reactor Network Model for Predicting NOx Emissions in Gas Turbines, Fuel, 89:2202-2210 (2010)
- De Toni, A., et al., A Reactor Network Model for Predicting NOx Emissions in an Industrial Natural Gas Burner, J. Braz. Soc. Mech. Sci. Eng., 35: 199-206 (2013)
- Chen, X., et al., Preliminary Combustor Design Using a Network Approach Based on Chemical Reactor Modeling, Journal of Chemical and Pharmaceutical Research, 5(12): 599-606 (2013)
- Novosselov, I.V., Chemical Reactor Networks for Combustion System Modeling, Ph.D. thesis, Mechanical Engineering, University of Washington, USA, 2006
- Rezvani, R., A Conceptual Methodology for The Prediction of Engine Emissions, Ph.D. thesis, School of Aerospace/ College of Engineering, Georgia Institute of Technology, USA, 2010
- Drennan, S.A., et al., Flow Field Derived Equivalent Reactor Networks for Accurate Chemistry Simulation In Gas Turbine Combustors, Proceedings, ASME Turbo Expo, 2009, GT2009-59861
- Xu, K., et al., A New Procedure for Predicting NOx Emission in Preliminary Gas Turbine Combustor Design, Proceedings, ASME Turbo Expo, 2013, GT2013-95248
- Nilsson, T., Development of a Simulation Methodology for Gas Turbine Combustion, M.Sc. thesis, Lund University, Sweden, 2014
- Jovanovic, R.D., et al., Experimental and Numerical Investigation of Flame Characteristics During Swirl Burner Operation under Conventional and Oxy-Fuel Conditions, Thermal Science, Vol.21, No.3, pp.1463-1477, 2017.
- Liu, X., Zheng, H., Influence of Deflection Hole Angle on Effusion Cooling in a Real Combustion Chamber Condition, Thermal Science, Vol.19, No.2, pp.645-656, 2015
- Cantera Documentation on Reactor Networks, www.cantera.org/docs/sphinx/html/reactors.html, 2015
- Al-Agha, M.S., Szentannai, P., 1-D Numerical Model for Prediction of Jetsam Concentration in Segregating Fluidized Beds, Thermal Science, DOI: 10.2298/TSCI170418066A, 2018.
- White, F.M., Fluid Mechanics, McGraw Hill, 7th ed., 2011
- Colket, M., et al., Development of an Experimental Database and Kinetic Models for Surrogate Jet Fuels, Proceedings, 45th AIAA Aerospace Sciences Meeting and Exhibit, American Institute of Aeronautics and Astronautics, AIAA 2007-770, 2007
- Oldani, A.L., Surrogate Modeling of Alternative Jet Fuels for Study of Autoignition Characteristics, M.Sc. thesis, University of Illinois at Urbana-Champaign, USA, 2014
- Honnet, S., et al., A Surrogate Fuel for Kerosene, Proceedings, Thirty-Second International Symposium on Combustion, 2008
- Ranzi, E., et al., Reduced Kinetic Schemes of Complex Reaction Systems: Fossil and Biomass-Derived Transportation Fuels, International Journal of Chemical Kinetics, 2014
- Ranzi, E., et al., Hierarchical and Comparative Kinetic Modeling of Laminar Flame Speeds of Hydrocarbon and Oxygenated Fuels, Progress in Energy and Combustion Science, 38: 468-501 (2012)
- Topal, A., et al., One-Dimensional Heat Transfer Analysis and Experimental Investigation of A Gas Turbine Combustor, Proceedings, CONV-14: Int. Symp. on Convective Heat and Mass Transfer, CONV-14-123, 2014
- Peters, N., Turbulent Combustion, Cambridge University Press, 2000
- Hataysal, S.E., Yozgatlıgil, A., Effect of Different Reaction Mechanisms on Calculation of a Jet Flame, Proceedings, Eighth Mediterranean Combustion Symposium, 2013