**ABSTRACT**

In this study, the influences of various engine materials such as palladium, titanium, thorium, zirconium, vanadium, alumina, aluminum bronze, copper, iron (gray cast), manganese, nickel, cobalt, and carbon steel on the effective efficiency and effective power with respect to the variation of equivalence ratio at the maximum combustion temperatures. In-cylinder gas temperatures have been determined with respect to the melting temperatures and the performance values have been calculated with respect to the variation of the gas temperatures. The results indicated that alumina provides the maximum performance values as aluminum bronze gives the minimum performance values due to the combustion temperatures. Further-more, the equivalence ratios which give the maximum performance characteristics have been parametrically described. The obtained results can be assessed by engine designers and manufacturers to choose suitable engine material.

**KEYWORDS**

PAPER SUBMITTED: 2018-09-16

PAPER REVISED: 2019-03-30

PAPER ACCEPTED: 2019-04-30

PUBLISHED ONLINE: 2019-05-12

**THERMAL SCIENCE** YEAR

**2020**, VOLUME

**24**, ISSUE

**Issue 1**, PAGES [183 - 191]

- Xia, S., et al., Engine performance improved by controlling piston motion: Linear phenomenological law system Diesel cycle, International Journal of Thermal Sciences, 51 (2012), 1, pp. 163-174
- Al-Hinti, I., et al., Performance analysis of air-standard Diesel cycle using an alternative irreversible heat transfer approach, Energy Convers. Manage., 49 (2008), 11, pp. 3301-3304
- Sakhrieh, A., et al., Performance of a diesel engine using a gas mixture with variable specific heats model, J Energy Inst., 83 (2010), 1, pp. 217-224
- Acikkalp, E., Caner, N., Determining performance of an irreversible nano scale dual cycle operating with Maxwell-Boltzmann gas, Physica A, 424 (2015), 1, pp. 342-349
- Acikkalp, E., Caner, N., Determining of the optimum performance of a nano scale irreversible Dual cycle with quantum gases as working fluid by using different methods, Physica A, 433 (2015), 1, pp. 247-258
- Ge, Y., et al., Finite-time thermodynamic modeling and analysis for an irreversible Dual cycle, Mathematical and Computer Modelling, 50 (2009), 1, pp. 101-108
- Hou, S.S., Heat Transfer Effects on the Performance of an Air Standard Dual Cycle, Energy Convers. Manage.,45 (2004), 18, pp. 3003-3015
- Ust, Y., et al., Heat Transfer Effects on the Performance of an Air -Standard Irreversible Dual Cycle, International Journal of Vehicle Design, 63 (2013), 1, pp. 102-116
- Gonca, G., Sahin, B., Simulation of Performance and Nitrogen Oxide Formation of a Hydrogen-Enriched Diesel Engine with the Steam Injection Method, Thermal Science, 19 (2015), 6, pp. 1985-1994
- Gonca, G., Thermo-Ecological Analysis of Irreversible Dual-Miller Cycle (DMC) Engine Based on the Ecological Coefficient of Performance (ECOP) Criterion, Iran J. Sci. Technol. Trans. Eng.,41 (2017), 41, pp. 269-280
- Gonca, G., et al., A Study on Late Intake Valve Closing Miller Cycled Diesel Engine, Arab J Sci Eng., 38 (2013), 1, pp. 383-93
- Gonca, G., et al., Performance maps for an air-standard irreversible Dual-Miller cycle (DMC) with late inlet valve closing (LIVC) version, Energy, 5 (2013), 1, pp. 285-290
- Gonca, G., et al., Investigation of Heat Transfer Influences on Performance of Air-Standard Irreversible Dual-Miller Cycle, Journal of Thermophysics and Heat Transfer, 29 (2013), 4, pp. 678-683
- Gonca, G., et al., Theoretical and Experimental Investigation of the Miller Cycle Diesel Engine in Terms of Performance and Emission Parameters, Applied Energy, 138 (2015), 4, pp. 11-20
- Gonca, G., et al., Comparison of Steam Injected Diesel Engine and Miller Cycled Diesel Engine By Using Two Zone Combustion Model, Journal of the Energy Institute, 88 (2015), 1, pp. 43-52
- Gonca, G., et al., The Effects of Steam Injection on the Performance and Emission Parameters of a Miller Cycle Diesel Engine, Energy, 78 (2014), 1, pp. 266-275
- Li, J., et al., Adjusting the operating characteristics to improve the performance of an emulsified palm oil methyl ester run diesel engine, Energy Convers. Manage., 69 (2013), 11, pp. 191-198
- Acikkalp, E., et al., Advanced exergoeconomic analysis of a trigeneration system using a diesel-gas engine, Applied Thermal Engineering, 67 (2014), 1-2, pp. 388-395
- Vellaiyan, S., Amirthagadeswaran K.S.N, Multi-Response Optimization of Diesel Engine Operating Parameters Running with Water-In-Diesel Emulsion Fuel, Thermal Science, 21 (2017), 1, pp. 427-439
- Liu, J., et. al., The Effects of EGR and Injection Timing on The Engine Combustion And Particulate Matter Emission Performances Fuelled With Diesel-Ethanol Blends, Thermal Science, 22 (2018), 3, pp. 1457-1467
- Gonca, G., Thermodynamic analysis and performance maps for the irreversible Dual-Atkinson cycle engine (DACE) with considerations of temperature-dependent specific heats, heat transfer and friction losses, Energy Convers. Manage., 111 (2016), 1, pp. 205-216
- Ebrahimi, R., Performance analysis of an irreversible Miller cycle with considerations of relative air-fuel ratio and stroke length, Applied Mathematical Modelling, 36 (2012), 1, pp. 4073-4079
- Ebrahimi, R., Thermodynamic modeling of performance of a Miller cycle with engine speed and variable specific heat ratio of working fluid, Computers and Mathematics with Applications, 62 (2011), 1, pp. 2169-2176
- Ebrahimi, R., Effects of mean piston speed, equivalence ratio and cylinder wall temperature on performance of an Atkinson engine, Mathematical and Computer Modelling, 53 (2011), 1, pp. 1289-1297
- Rashidi, M.M., Hajipour, A., Comparison of Performances of Air-Standard Atkinson, Diesel and Otto Cycles with Constant Specific Heats, Int J Advanced Design and Manufacturing Technology, 6 (2013), 1, pp. 57-62
- Rashidi, M.M., et. al., First and Second-Law Efficiency Analysis and ANN Prediction of a Diesel Cycle with Internal Irreversibility, Variable Specific Heats, Heat Loss, and Friction Considerations, Advances in Mechanical Engineering, 359872 (2014), 1, pp. 1-16
- Rashidi, M.M., et. al., First and Second-Laws Analysis of an Air-Standard Dual Cycle With Heat Loss Consideration, International Journal of Mechatronics, Electrical and Computer Technology, 4 (2014), 1, pp. 315-332
- Mousapour, A., et. al., Performance evaluation of an irreversible Miller cycle comparing FTT (finite-time thermodynamics) analysis and ANN (artificial neural network) prediction, Energy, 94 (2016), 1, pp. 100-109
- EES Academic Professional Edition, (2017), V.10.305-3D, USA, F-Chart Software
- Ferguson, C.R., Internal combustion engines - applied thermosciences, John Wiley and Sons Inc., New York, USA, 1986
- Hohenberg, G., Advanced Approaches for Heat Transfer Calculations, SAE 790825 (1979), 1, pp. 1-19
- Ge, Y., et. al., Finite-Time Thermodynamic Modelling and Analysis of an Irreversible Otto-Cycle, Applied Energy, 85 (2008), 1, pp. 618-624
- Lin, J., et. al., Finite-Time Thermodynamic Performance of a Dual Cycle, Int J Energy Res., 23 (1999), 9, pp. 765-772.
- www.engineeringtoolbox.com/melting-temperature-metals-d_860.html
- Gonca, G., Palaci, Y., Performance investigation of a Diesel engine under effective efficiency-power-power density conditions, Scientia Iranica, (In press.)