International Scientific Journal


This study determined the heat, flow, and electrical power values of and automotive thermoelectric generation system integrated in the exhaust system of an internal combustion gasoline engine. The combustion analyses of the engine integrated with and without automotive thermoelectric generation were carried out. The 20 thermoelectric modules were placed on the rectangular structure which was made of the aluminum 6061 material. The thermoelectric modules were electrically connected to each other in series. The gasoline engine was operated at full load at 1250, 1750, and 2250 rpm, and the electrical energy generated by the automotive thermoelectric generation system was calculated. At the same time, the heat and flow analyses of the automotive thermoelectric generation system were performed using the ANSYS FLUENT commercial software.
PAPER REVISED: 2019-02-17
PAPER ACCEPTED: 2019-03-06
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2020, VOLUME 24, ISSUE Issue 1, PAGES [137 - 145]
  1. Balcı, C., Climatization of a vehicle cabinet by an NH3-H2O absorption system performing with exhaust gas energy., postgraduate thesis, Süleyman Demirel University, Isparta, Turkey, 2011
  2. Temizer İ., et al., Effects on vehıcle systems of technology thermoelectric, Batman University Journal of Life Sciences, 1(2) (2012), 2, pp. 199-209
  3. Goncalves, L. M., et al., Heat-pipe assisted thermoelectric generators for exhaust gas applications, ASME 2010 International Mechanical Engineering Congress & Exposition, (2010), pp. 1387-1396
  4. Saqr, K. M., et al., Thermal design of automobile exhaust based thermoelectric generators: objectives and challenges, International Journal Automotiv Technology, 9 (2008), pp. 155-160
  5. Thacher, E. F., et al., Progress in thermoelectrical energy recovery from a light truck exhaust , Paper presentation at the DEER conf,
  6. Thacher, E. F., et al., Testing of an automobile exhaust thermoelectric generator in a light truck, Automobile Engineering, 221-1 (2007), pp. 95-107
  7. Antonova, E.E., Looman, C. D., T Finite elements for thermoelectric device analysis in ansys, ICT 2005, 24th International Conference on, (2005), pp. 215-218
  8. Li, S. L., et al., Thermo-mechanical analysis of thermoelectric modules, Microsystems Packaging Assembly and Circuits Technology Conference, (2010), pp. 1-4
  9. Admasu, T. B., et al., Effects of temperature non-uniformity over the heat spreader on the outputs of thermoelectric power generation system, Energy Conversion and Management, 76 (2013), pp. 553-540
  10. Hsu, T. C., et al., An effective seebeck coefficient obtained by experimental results of a thermoelectric generator module, Applied Energy, (2011), pp. 5173-5179
  11. Kulbachinskii, V. A., Kaminskii, A. Y., Thermoelectric power and shubnikov-de has effect in magnetic impurity-doped Bİ2Te3 and Bİ2Se, Journal of Magnetism and Magnetic Materials, 272 (2004), pp. 1991-2015
  12. Kim, S. K., et al., Power Generation System for Future Hybrid Vehicles Using Hot Exhaust Gas, Journal of Electronic Materials, 40-5 (2011), pp. 778-783
  13. Liu, X., et al., An energy-harvesting system using thermoelectric power generation for automotive application, Electrical Power and Energy Systems, 67 (2015), pp. 510-516
  14. Hajmohammadi, M. R., et al., Effects of a thick plate on the excess temperature of iso-heat flux heat sources cooled by laminar forced convection flow: conjugate analysis, Numerical Heat Transfer, Part A: Appl , 2 (2014), pp. 205-216
  15. Abouzar, P., et al., Investigations on the internal shape of constructal cavities intruding a heat generating body, Thermal Science, 19-2 (2012), pp. 164-179
  16. Najafi, H., et al., Energy and cost optimization of a plate and fin heat exchanger using genetic algorithm, Applied Thermal Engineering, 31 (2011), pp. 1839-1847
  17. Hajmohammadi, M. R., et al., Improvement of forced convection cooling due to the attachment of heat sources to a conducting thick plate, J Heat Transfer, 135-12 (2013), pp. 124504-214508
  18. Kim, T. Y., et al., Waste heat recovery of a diesel engine using a thermoelectric generator equipped with customized thermoelectric modules, Energy Conversion Management, 124 (2016), pp. 280-286

© 2022 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence