THERMAL SCIENCE

International Scientific Journal

Lei Wang

,

Changhong Zhan

,

Jianli Zhang

,

Xudong Zhao

THE ENERGY AND EXERGY ANALYSIS OF COUNTER-FLOW REGENERATIVE EVAPORATIVE COOLER

ABSTRACT
Recently the regenerative evaporative cooler (REC) has drawn great attention from researchers because it can cool the intake air below the wet-bulb temperature and approaching its dew point temperature. For further understanding of the heat and mass transfer occurred in a counter-flow REC, a novel mathematical model is developed based on the law of energy conservation and the principle of the thermodynamic theory. The proposed mathematical model is validated against experimental data from literature. The parametric study is performed to investigate the performance of the REC under different operating and geometrical conditions. It is found that the exergy destruction and exergy efficiency ratio of the REC are strongly influenced by the intake air velocity, the working to intake air ratio and channel gap, followed by the channel length. The working to intake air ratio choosing from 0.3 to 0.4 is appropriate in order to achieve better thermal performance with permissible level of thermodynamic cost. Moreover, the results obtained in this paper reveal that the best thermal performance does not correspond to the best thermodynamic performance. Thus, both the first and second law of thermodynamics should be considered for a comprehensive analysis.
KEYWORDS
regenerative evaporative cooler, heat and mass transfer, energy, exergy
PAPER SUBMITTED: 2018-06-02
PAPER REVISED: 2018-09-04
PAPER ACCEPTED: 2018-10-16
PUBLISHED ONLINE: 2018-11-04
DOI REFERENCE: https://doi.org/10.2298/TSCI180602304W
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2019, VOLUME 23, ISSUE Issue 6, PAGES [3615 - 3626]
REFERENCES
  1. Zhao X. D., et al., Numerical study of a novel counter-flow heat and mass exchanger for dew point evaporative cooling, Applied Thermal Engineering, 28(2008), pp. 1942-1951.
  2. Riangvilaikul, B., Kumar, S., Numerical study of a novel dew point evaporative cooling system, Energy and Buildings, 42(2010), pp. 2241-2250.
  3. Hasan A., Going below the wet-bulb temperature by indirect evaporative cooling: Analysis using a modified e-NTU method, Applied Energy, 89(2012), pp. 237-245.
  4. Pandelidis D, Anisimov S, Worek WM. Comparison study of the counter-flow regenerative evaporative heat exchangers with numerical methods. Applied Thermal Engineering 84(2015), pp. 211-224.
  5. Duan Z. Y., et al. Experimental study of a counter-flow regenerative evaporative cooler. Building and Environment, 104(2016), pp. 47-58.
  6. Kabeel A. E., Abdelgaied M, Numerical and experimental investigation of a novel configuration of indirect evaporative cooler with internal baffles, Energy Conversion and Management, 126(2016), pp. 526-536.
  7. Moshari S, Heidarinejad G. Numerical study of regenerative evaporative coolers for sub-wet bulb cooling with cross- and counter-flow configuration, Applied Thermal Engineering, 89(2015), pp. 669-683.
  8. Cui X, et al., Developing a performance correlation for counter-flow regenerative indirect evaporative heat exchangers with experimental validation, Applied Thermal Engineering, 108(2016), pp. 774-784.
  9. Duan Z. Y., et al., Design, fabrication and performance evaluation of a compact regenerative evaporative cooler: Towards low energy cooling for buildings, Energy, 40(2017), pp. 506-519.
  10. Boukhanouf R, et al., Computer modelling and experimental investigation of building integrated sub-wet bulb temperature evaporative cooling system, Applied Thermal Engineering, 115(2017), pp. 201-211.
  11. Saravanan, M. N., et al., Energy and exergy analysis of counter flow wet cooling towers, Thermal Science, 12(2008), pp. 69-78.
  12. Santos, J. C., et al., Energy and exergy analysis applied to the evaporative cooling process in air washers, International Journal of refrigeration, 36(2013), pp. 1154-1161.
  13. Pandey A, et al., Energy and exergy performance evaluation of a typical solar photovoltaic module, Thermal Science, 19(2015), pp. 625-636.
  14. Zhao, X. D., et al., Comparative study of heat and mass exchanging materials for indirect evaporative cooling systems, Building and Environment, 43(2008), pp. 1902-1911.
  15. Baehr, H. D., Stephan, K., Heat and mass transfer, Springer, New York, USA, 2006.
  16. Kays, W. M., Whitelaw J. H., Convective heat and mass transfer, Cambridge University Press, New York, USA, 2011.
  17. Bergman, T. L., et al., Fundamentals of heat and mass transfer. John Wiley & Sons, New York, USA, 2011.
  18. Riangvilaikul B., Kumar S., An experimental study of a novel dew point evaporative cooling system, Energy and Buildings, 42(2010), pp. 637-644.
  19. Alpuche, M. G., et al., Exergy analysis of air cooling systems in buildings in hot humid climates, Applied Thermal Engineering, 25(2005), pp. 507-517.
  20. Ren, C. Q., et al., Principles of exergy analysis in HVAC and evaluation of evaporative cooling schemes, Building and Environment, 37(2002), pp. 1045-1055.
PDF VERSION [DOWNLOAD]
The energy and exergy analysis of counter-flow regenerative evaporative cooler

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence