THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

Guangcheng Liu

NUMERICAL SIMULATION AND ANALYSIS OF THE TEMPERATURE EFFECT ON THE FISSION OF CONCRETE

ABSTRACT
In order to further improve the crack resistance of concrete engineering, a numerical simulation method is constructed to study the effect of temperature on the fission of concrete. Based on the finite element method, the mathematical model is constructed, and the numerical calculation and image display are used to simulate and analyze the engineering problems. The temperature sensor is used to observe the whole variation law of typical temperature field, and the temperature of concrete entering and pouring is obtained. Thus, the temperature control real-time automatic acquisition system is set up. According to the temperature field and temperature stress distribution rules, the ideal temperature control curve model of concrete is proposed. Finally, the numerical calculation and experiment of the model are carried out. The results show that the maximum surface stress level decreases in varying degrees after different surface insulation measures are taken, and if the thermal insulation material’s β ≤ 10 kJ/m2h℃, the maximum surface stress of concrete can be reduced to 0.06~0.14 MPa. In this paper, it is shown that the negative effect of the large diurnal temperature difference on concrete surface insulation can be controlled.
KEYWORDS
temperature, concrete, fission, effect, numerical simulation
PAPER SUBMITTED: 2018-12-09
PAPER REVISED: 2019-02-05
PAPER ACCEPTED: 2019-02-15
PUBLISHED ONLINE: 2019-05-18
DOI REFERENCE: https://doi.org/10.2298/TSCI181209184L
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2019, VOLUME 23, ISSUE Issue 5, PAGES [2713 - 2720]
REFERENCES
  1. Ruiz G, Ortega J J, Yu R C, et al. Effect of size and cohesive assumptions on the double- K fracture parameters of concrete[J]. Engineering Fracture Mechanics, 2016, 16(6): 198-217.
  2. Ren J, Lu S. Characterizing Air Void Effect on Fracture of Asphalt Concrete at Low-temperature using Discrete Element Method[J]. Engineering Fracture Mechanics, 2016, 1(70):636-646.
  3. Kallel H, Carré H, Borderie C L, et al. Effect of temperature and moisture on the instantaneous behaviour of concrete[J]. Cement & Concrete Composites, 2017, 80(78):326-332.
  4. Alsheyab M A T, Khedaywi T S. Analysis of the Effect of Temperature on the Resilient Modulus of Asphalt Concrete Mixed with Electric Arc Furnace Dust (EAFD)[J]. Water Air & Soil Pollution, 2016, 227(3):1-6.
  5. Wei W, Lu C, Li Y, et al. Effects of stress and high temperature on the carbonation resistance of fly ash concrete[J]. Construction & Building Materials, 2017, 1(38):486-495.
  6. Jiang H. Multi-scale numerical simulation analysis for influence of combined leaching and frost deteriorations on mechanical properties of concrete[J]. Multidiscipline Modeling in Materials & Structures, 2016, 12(4):648-671.
  7. Mi Z, Yu H, Li Q, et al. Elevated temperature inversion phenomenon in fracture properties of concrete and its application to maturity model[J]. Engineering Fracture Mechanics, 2018, 1(99):159-186.
  8. Zhen C, Li X, Yang Y, et al. Experimental and numerical investigation of the effect of temperature patterns on behaviour of large scale silo[J]. Engineering Failure Analysis, 2018, 91(88):543-553.
  9. Xue–Feng Liu, Dong–Mei Chang, Bao–Lin Wang, et al. Effect of temperature-dependency of material properties on thermal shock fracture of solids associated with non-Fourier heat conduction[J]. Theoretical & Applied Fracture Mechanics, 2018,34(8):429-441.
  10. Gangnant A, Saliba J, Borderie C L, et al. Modeling of the quasibrittle fracture of concrete at meso-scale: Effect of classes of aggregates on global and local behavior[J]. Cement & Concrete Research, 2016, 8(9):35-44.
  11. Martins D J, Correia J R, Brito J. The effect of high temperature on the residual mechanical performance of concrete made with recycled ceramic coarse aggregates[J]. Fire & Materials, 2016, 40(2):289-304.
  12. Haeri H, Sarfarazi V, Hedayat A, et al. Effect of tensile strength of rock on tensile fracture toughness using experimental test and PFC2D simulation[J]. Journal of Mining Science, 2016, 52(4):647-661.
  13. Zhu X, Yuan G, Dai Z, et al. Effect of interfacial transition zone on the Young's modulus of carbon nanofiber reinforced cement concrete[J]. Cement & Concrete Research, 2018, 10(7):49-63.
  14. Dong W, Yang D, Zhou X, et al. Experimental and numerical investigations on fracture process zone of rock–concrete interface[J]. Fatigue & Fracture of Engineering Materials & Structures, 2016, 40(5):820-835.
  15. Zdeněk P. Bažant, Bai Shang-Ping, Ravindra G. Fracture of rock: Effect of loading rate[J]. Engineering Fracture Mechanics, 2016, 45(3):393-398.
PDF VERSION [DOWNLOAD]
Numerical simulation and analysis of the temperature effect on the fission of concrete

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence