THERMAL SCIENCE

International Scientific Journal

EFFECT OF BUBBLE SIZE ON NANOFIBER DIAMETER IN BUBBLE ELECTROSPINNING

ABSTRACT
Polymer bubbles are widely used for fabrication of nanofibers. Bubble size affects not only bubble's surface tension, but also fiber's morphology. A mathematical model is established to reveal the effect of bubble size on the spinning process, and the experiment verification shows the theoretical analysis is reliable.
KEYWORDS
PAPER SUBMITTED: 2015-10-12
PAPER REVISED: 2016-02-15
PAPER ACCEPTED: 2016-02-15
PUBLISHED ONLINE: 2016-08-13
DOI REFERENCE: https://doi.org/10.2298/TSCI1603845R
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2016, VOLUME 20, ISSUE Issue 3, PAGES [845 - 848]
REFERENCES
  1. Chen, R., et al., Bubble Rupture in Bubble Electrospinning, Thermal Science, 19 (2015), 4, pp. 1141-1149
  2. Shen, J., et al., Effect of Pore Size on Gas Resistance of Nanofiber Membrane by the Bubble Electrospinning, Thermal Science, 19 (2015), 4, pp. 1349-1351
  3. He, C. H., et al., Bubbfil Spinning for Fabrication of PVA Nanofibers, Thermal Science, 19 (2015), 2, pp. 743-746
  4. Liu, H. Y., et al., A Novel Method for Fabrication of Fascinated Nanofiber Yarns, Thermal Science, 19 (2015), 4, pp. 1331-1335
  5. Liu, Z, et al., Active Generation of Multiple Jets for Producing Nanofibres with High Quality and High Throughput, Materials & Design, 94 (2016), Mar., pp. 496-501
  6. Shen, J., et al., Bio-Mimic Design of PM2. 5 Anti-Smog Masks, Thermal Science, 18 (2014), 5, pp. 1689-1690
  7. Li, Y., et al., Copper/PA66 Nanofibers by Bubbfil-Spinning, Thermal Science, 19 (2015), 4, pp.1463-1465
  8. Liu, Z., et al., Tunable Surface Morphology of Electrospun PMMA Fiber Using Binary Solvent, Applied Surface Science, 364 (2016), pp. 516-521
  9. Liu, Z., et al., A Mathematical Model for the Formation of Beaded Fibers in Electrospinning, Thermal Science, 19 (2015), 4, pp. 1151-1154
  10. Xu, L., et al., Numerical Simulation for the Single Bubble Electrospinning Process, Thermal Science, 19 (2015), 4, pp. 1255-1259
  11. Ren, Z., et al., Thermal and Hydrodynamic Performance Analysis of Charged Jet in Electrospinning , International Journal of Numerical Methods for Heat& Fluid Flow, 24 (2014), 6, pp. 1260-1267

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence