THERMAL SCIENCE
International Scientific Journal
A MODEL FOR THE EVALUATION OF HEAT LOSS FROM UNDERGROUND CABLES IN NON-UNIFORM SOIL TO OPTIMIZE THE SYSTEM DESIGN
ABSTRACT
With the proliferation of technologies and underground systems, analysis of thermal fields in soil has become a topic of great interest in the developing technology of buried structures. In this work, we have investigated the steady state temperature field (from linear heat sources - buried cable -) in a different type of soil and excavation geometry. In a laboratory, a physical model was built on scale, which reproduces an "undisturbed" area containing a linear thermal source. This scale model was produced for experimental activity. A measuring chain was made to analyze the thermal field in various types of soils, by varying the electrical current through the line source. The physical model was recreated using a finite volume calculation software. Analysis of the different field system configurations were completed and we have studied a model for the improvement of the design method.
KEYWORDS
PAPER SUBMITTED: 2012-05-28
PAPER REVISED: 2013-09-01
PAPER ACCEPTED: 2013-09-05
PUBLISHED ONLINE: 2013-09-22
THERMAL SCIENCE YEAR
2015, VOLUME
19, ISSUE
Issue 2, PAGES [461 - 474]
- El-Kady, M. A., Calculation of the sensitivity of power cable capacity to variations of design and environmental parameters, IEEE Trans. Power App. Syst., vol. PAS-103, n° 8 (1985), pp. 2043-2050.
- Mochlinski, K., Assessment of the influence of soil thermal resistivity on the ratings of distribution cables, Proc. IEE, vol. 123, no. 1 (1976), pp. 60-72.
- Devendra N. Singh, Devid K.., Generalized relationships for estimating soil thermal resistivity, Experimental Thermal and Fluid Science 22 (2000) pp. 133-143.
- Groeneveld, G. J., Snijders, A. L., Koopmans, G., Vermeer, J., Improved method to calculate the critical conditions for drying out sandy soils around power cables, Proc. IEE, vol. 131, part C, n°. 2 (1984), pp. 42-53.
- Black, W. Z. et al. (Sept. 1982), "Thermal stability of soils adjacent to underground transmission power cables,", Final report of EPRI Research Project 7883.
- CEI 20-21 (10/2007). Electric cables. Calculation of the current capacity.
- IEC 60287-3-1/2 Electric cables - Calculation of the current rating - Sections on operating conditions (1999).
- IEC 287-2-1: 1994, Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 1: Calculation of thermal resistance (1994).
- De Vries, D. A. (1963). Thermal properties of soils. In W.R. van Wijk, Physics of plant Environment, John Wiley, New York.
- Naidu A. D., Devendra N. Singh, A generalized procedure for determine thermal resistivity of soils. International Journal of Thermal Sciences 43 (2004) 43-51.
- Arman, A. N., Cherry, D. M., Gosland, L., Hollingsworth, P. M. (1964), "Influence of soil moisture migration on power rating of cables in H.V. transmission," Proc. IEE, vol. 111, pp. 1000-1016.
- Donnazi, F., Occhini, E., and Seppi, A. (1979), "Soil thermal and hydrological characteristics in designing underground cables," Proc. IEE, vol. 126, n° 6.
- Brakelmann, H. (1984), "Physical principles and calculation methods of moisture and heat transfer in cable trenches," EU Report 19. Berlin: VDE Verlag.
- CIGRE (1986), "Current ratings of cables buried in partially dried out soil. Part 1: Simplified method that can be used with minimal soil information, Electra n°104, pp.11-22.
- CIGRE (Dee. 1992), "Determination of a value of critical temperature rise for a cable backfill material," Electra, vol. 145, pp. 15-29.
- IEC (1993), "Amendment 3 to IEC publication 287: Calculation of the continuous current rating of cables (100% load factor)."
- R.de Lieto Vollaro, L. Fontana, A. Quintino, Improving evaluation of the heat losses from arrays of pipes or electric cables in homogenous soil, Applied Thermal Engineering (Elsevier Journal) 6/2011.
- R. De Lieto Vollaro, F. Salata, A. Vallati, Studio sperimentale del comportamento termico di vari tipi di suolo in presenza di una sorgente di calore - Proceedings, 65° Congresso Nazionale ATI - Domus de Maria (CA), 13-17 Settembre 2010.
- A. De Lieto Vollaro, R. De Lieto Vollaro, F. Salata, A. Vallati, Implementazione di un modello CFD per studiare il campo termico all'interno del terreno in prossimità di cavi elettrici - Proceedings, 66° Congresso Nazionale ATI - Rende (Cosenza), 5-9 Settembre 2011.
- UNI 10351. Building materials. Thermal conductivity and vapor permeability (1994).
- UNI EN ISO 10456. Materials and building products. Properties hygrometric - Tabulated values design and methods for the determination of thermal values declared and designed (2008).
- H.S. Carlslaw and J.C. Jaeger, "Conduction of heat in solids": Cap. II "Linear flow of heat: the infinite and semi infinite solid", 2.10 (pag.77) "Application to the determination of thermal conductivity" New York, USA, 1990.