THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

THERMODYNAMIC MODELLING AND EFFICIENCY ANALYSIS OF A CLASS OF REAL INDIRECTLY FIRED GAS TURBINE CYCLES

ABSTRACT
Indirectly or externally-fired gas-turbines (IFGT or EFGT) are novel technology under development for small and medium scale combined power and heat supplies in combination with micro gas turbine technologies mainly for the utilization of the waste heat from the turbine in a recuperative process and the possibility of burning biomass or 'dirty' fuel by employing a high temperature heat exchanger to avoid the combustion gases passing through the turbine. In this paper, by assuming that all fluid friction losses in the compressor and turbine are quantified by a corresponding isentropic efficiency and all global irreversibilities in the high temperature heat exchanger are taken into account by an effective efficiency, a one dimensional model including power output and cycle efficiency formulation is derived for a class of real IFGT cycles. To illustrate and analyze the effect of operational parameters on IFGT efficiency, detailed numerical analysis and figures are produced. The results summarized by figures show that IFGT cycles are most efficient under low compression ratio ranges (3.0-6.0) and fit for low power output circumstances integrating with micro gas turbine technology. The model derived can be used to analyze and forecast performance of real IFGT configurations.
KEYWORDS
PAPER SUBMITTED: 2008-08-01
PAPER REVISED: 2009-02-03
PAPER ACCEPTED: 2009-02-15
DOI REFERENCE: https://doi.org/10.2298/TSCI0904041M
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2009, VOLUME 13, ISSUE Issue 4, PAGES [41 - 48]
REFERENCES
  1. Martinot, E., Dienst, C., Weiliang, L., et al., Renewable Energy Futures: Targets, Scenarios, and Pathways, Annual Review of Environment and Resources, 32 (2007), 2, pp. 205-239
  2. Klara, J. M., Izsak, M. S., Wherley, M. R., Advanced Power Generation: The Potential of Indirectly-Fired Combined Cycle, ASME Paper 95-GT-261, 1995
  3. Martin, K., Ulf, H., The Externally-Fired Gas-Turbine (EFGT-Cycle) for Decentralized Use of Biomass, Applied Energy, 84 (2007), 7-8, pp. 795-805
  4. Daniele, C., Paolo, D., Giorgio, C., Performance Evaluation of Small Size Externally Fired Gas Turbine (EFGT) Power Plants Integrated with Direct Biomass Dryers, Energy, 31 (2006), 10-11, pp. 1459-1471
  5. LaHaye, P. G., Bary, M. R., Externally Fired Combustion Cycle (EFCC) a DOE Clean Coal V Project: Effective Means of Rejuvenation for Older Coal-Fired Stations, ASME Paper 94-GT-483, 1994
  6. Consonni, S., Macchi, E., Farina, F., Externally Fired Combined Cycles (EFCC). Part A: Thermodynamics and Technological Issues, ASME Paper 96-GT-92, 1996
  7. Consonni, S., Macchi, E., Externally Fired Combined Cycles (EFCC). Part B: Alternative Configurations and Cost Projections, ASME Paper 96-GT-93, 1996
  8. Eidensten, L., Yan, J., Svedberg, G., Biomass Externally Fired Gas Turbine Cogeneration, Journal of Engineering for Gas Turbines and Power, 118 (1996), 3, pp. 604-609
  9. Ferreira, S. B., Pilidis, P., Comparison of Externally Fired and Internal Combustion Gas Turbine Using Biomass Fuel, Journal of Energy Resources, 123 (2001), 4, pp. 291-296
  10. Koetzier, H., Knoef, H., Technical and Economic Feasibility of an Indirectly Fired Gas Turbine for Rural Electricity Production from Biomass, Report no. 9712, EWAB Project, 1997
  11. Evans, R. L., Zaradic, A. M., Optimization of a Wood-Waste-Fuelled, Indirectly Fired Gas Turbine Cogeneration Plant, Bioresource Technology, 57 (1996), 2, pp. 117-126
  12. Nelson, J. O., High Pressure Ceramic air Heater for Indirectly-Fired Gas Turbine Applications. US DOE Contractors Review Meeting on Coal-Fueled Heat Engines, Advanced PFBC and Gas Stream Cleanup Systems, Morgantown, WV, USA, 1992
  13. Solomon, P. R., Serio, M. A., Cosgrove, J. E., et al., A Coal-Fired Heat Exchanger for an Externally Fired Gas Turbine, Journal of Engineering for Gas Turbines and Power, 118 (1996), 1, pp. 23-31
  14. Kumada, M., A Study on the High Performance Ceramic Heat Exchanger for Ultra High Temperatures, Heat Transfer Enhancement of Heat Exchangers, 1999, pp. 301-324
  15. Solomon, P. R. et al., A Coal-Fired Heat Exchanger for an Externally Fired Gas Turbine. Journal of Engineering for Gas Turbines and Power, 118 (1996), 1, pp. 22-31
  16. DiCarlo, J.A., van Roode, M., Ceramic Composite Development for Gas Turbine Engine Hot Section Components., ASME Paper GT2006-90151, 2006
  17. Schulte-Fischedick, J., Dreissigacker, V., Tamme, R., An Innovative Ceramic High Temperature Plate-Fin Heat Exchanger for EFCC Processes, Applied Thermal Engineering, 27 (2007), 8-9, pp. 1285-1294
  18. Aquaro, D., Piccitto, U., Pieve, M., Feasibility Analysis of a High Temperature Heat Exchanger for Combined Cycles, International Journal of Heat and Technology, 21 (2003), 2, pp. 167-174
  19. Yan, J., Externally Fired Gas Turbines: The State-of-the-Art of Research and Engineering Development, Royal Institute of Technology, Chem. Eng. and Techn. Dept., TRITA-KET R87, 1998
  20. Yan, J., Eidensten, L., Status and Perspective of Externally Fired Gas Turbines, Journal of Propulsion and Power, 16 (2000), 4, pp. 572-576
  21. Bram, S., De Ruyck, J., Novak-Zdravkovic, A., Status of External Firing of Biomass in Gas Turbines, Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, 219 (2005), 2, pp. 137-145

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence