THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

External Links

online first only

Enhanced heat transfer research in liquid-cooled channel based on piezoelectric vibrating cantilever

ABSTRACT
In order to study the variation of vortices and heat transfer enhancement characteristics of piezoelectric vibrating cantilever in liquid-cooled channels, the effects of fluid density and viscosity, mainstream velocity and excitation voltage on vortices were analyzed. The theoretical and numerical simulation of piezoelectric vortices was carried out by using fluid-solid coupling method. On the basis of hydrodynamic function considering the additional effect of liquid viscosity and density on piezoelectric vibrator, the vortex structure of piezoelectric vibrator was analyzed by panel method free-wake model. It is found that the larger the density of the liquid, the smaller the vortex shedding strength and the radius of the core; the larger the viscosity of the liquid, the easier to fully develop the vortex generated by the excitation; the increase of the mainstream flow velocity is beneficial to the development of the vortex structure and the increase of the vorticity intensity; compared with the increase of the mainstream flow velocity, the excitation voltage is more conducive to the enhancement of the vorticity structure, then make it easier to mix hot and cold fluids, thus enhancing heat transfer.
KEYWORDS
PAPER SUBMITTED: 2020-05-20
PAPER REVISED: 2020-06-24
PAPER ACCEPTED: 2020-06-30
PUBLISHED ONLINE: 2020-09-12
DOI REFERENCE: https://doi.org/10.2298/TSCI200520244F
REFERENCES
  1. Wait, S. M., et al., Piezoelectric Fans Using Higher Flexural Modes for Electronics Cooling Applications, IEEE Transactions on Components and Packaging Technologies, 30 (2007), 1, pp. 119-128.
  2. Sufian, S. F., et al., Effect of Side and Tip Gaps of a Piezoelectric Fan on Microelectronic Cooling, IEEE Transactions on Components Packaging and Manufacturing Technology, 3 (2013), 9, pp. 1545-1553.
  3. Zhou, Y., et al., Investigation on the Flow Field and Heat Transfer Characteristics of a Piezoelectric Fan Embedded Cooling System, Piezoelectrics and Acoustooptics, 40 (2018), 2, pp. 309-312.
  4. Kong, Y., et al., Structure Design of Piezoelectric Fans and Research on Influence of Parameters, Journal of Beijing University of Aeronautics and Astronautics, 42 (2016), 9, pp. 1977-1985.
  5. Li, X. J., et al., Experimental Investigation of Pin-Fin Heat Sink with Piezoelectric Cooling Fan, Journal of Engineering Thermophysics, 39 (2018), 1, pp. 155-158.
  6. Li, X. J., et al., Characteristics of Heat Transfer with Dual Piezoelectric Fans in Presence of Cross flow, Acta Aeronautica et Astro, 39 (2018), 1, pp. 108-117.
  7. Toda, M., OSAKA, S., Vibrational fan using the piezoelectric polymer PVF2, Proceedings of the IEEE, 67 (1979), 8, pp. 1171-1173.
  8. Kimber, M., et al., Local Heat Transfer Coefficients Induced by Piezoelectrically Actuated Vibrating Cantilevers, Journal of Heat Transfer, 129 (2007), 9, pp. 1168-1177.
  9. Lin, C. N., Analysis of Three-Dimensional Heat and Fluid Flow Induced by Piezoelectric Fan, International Journal of Heat and Mass Transfer, 55 (2012), 11, pp. 3043-3053.
  10. Lin, C. N., Enhanced Heat Transfer Performance of Cylindrical Surface by Piezoelectric Fan under Forced Convection Conditions, International Journal of Heat and Mass Transfer, 60 (2013), pp. 296-308.
  11. Chon, J. W. M., et al., Experimental Validation of Theoretical Models for The Frequency Response of Atomic Force Microscope Cantilever Beams Immersed in Fluids, Journal of Applied Physics, 87 (2000), pp. 3978-3988.
  12. Korayem, M. H., et. al., Frequency Response of Atomic Force Microscopy Microcantilevers Oscillating in a Viscous Liquid: a Comparison of Various Methods, Scientia Iranica, 18 (2011), 5, pp. 1116-1125.
  13. Maali, A., et. al., Hydrodynamics of Oscillating Atomic Force Microscopy Cantilevers in Viscous Fluids, Journal of Applied Physics, 97 (2005), 7, pp. 71-76.
  14. Tang, L., Paidoussis, M. P., On The Instability and the Post-Critical Behavior of Two-dimensional Cantilevered Flexible Plates in Axial Flow, Journal of Sound and Vibration, 30 5(2007), 1-2, pp. 97-115.
  15. Han, C., et al., Unsteady Aerodynamic Analysis of Tandem Flat Plates in Ground Effect, Journal of Aircraft, 39 (2002), 6, pp. 1028-1034.
  16. Song, K. W., et al., Relationship between Longitudinal Vortex Intensity and Heat Transfer Intensity of Flat Tube Heat Exchanger, Ciesc Journal, 67 (2016), 5, pp. 1858-1867.
  17. Liu, C. J., et. al., Numerical Simulation for Heat Transfer Enhancement Mechanism of Vorticity Intensity, Journal of Hebei University of Technology, 43 (2014), 3, pp. 65-68.
  18. Huang, Q., et. al., Influence of Vortex on Heat Transfer Enhancement in Triangular Grooved Channel by Pulsating Flow, Ciesc Journal, 67 (2016), 9, pp. 3616-3624.