THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Authors of this Paper

External Links

online first only

Enhancement on the thermal behavior using heat pipe arrays in battery thermal management compared to cooper rods

ABSTRACT
In the present study, the thermal behavior of a power battery cooling Cooling structure employing copper rods and heat pipes was compared. The influences of flow rate and inlet temperature of coolant, as well as input power were discussed by numerical methods. The numerical computation results showed that heat pipe could significantly augment the heat transfer of the battery cooling system than the copper rod. Within the scope of this study, the heat pipe reduced the maximum temperature by 41.6%- 60.9%. The distributions of temperature ratios on the battery surface, together with the heat flux as soon as streamlines around the heat pipe condenser was also illustrated.
KEYWORDS
PAPER SUBMITTED: 2019-12-10
PAPER REVISED: 2020-01-17
PAPER ACCEPTED: 2020-02-03
PUBLISHED ONLINE: 2020-03-15
DOI REFERENCE: https://doi.org/10.2298/TSCI191210124W
REFERENCES
  1. CHOI Y S, KANG D M. Prediction of thermal behaviors of an air-cooled lithium-ion battery system for hybrid electric vehicles. Journal of Power Sources, 270 (2014), pp. 273-280.
  2. ETACHERI V, MAROM R, ELAZARI R, et al. Challenges in the development of advanced Li-ion batteries: a review. Energy & Environmental Science, 4 (2011), 9, pp. 3243-3262.
  3. TRAN T-H, HARMAND S, SAHUT B. Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery. Journal of Power Sources, 265 (2014), pp. 262-272.
  4. RAO Z, WANG S, WU M, et al. Experimental investigation on thermal management of electric vehicle battery with heat pipe. Energy Conversion and Management, 65 (2013), p. 92-97.
  5. WALDMANN T, WILKA M, KASPER M, et al. Temperature dependent ageing mechanisms in Lithiumion batteries-A Post-Mortem study. Journal of Power Sources, 262 (2014), pp. 129-135.
  6. BANDHAUER T M, GARIMELLA S, FULLER T F. A critical review of thermal issues in lithium-ion batteries. Journal of the Electrochemical Society, 158 (2011), 3, pp. R1-R25.
  7. TROXLER Y, WU B, MARINESCU M, et al. The effect of thermal gradients on the performance of lithium-ion batteries. Journal of Power Sources, 247 (2014), pp. 1018-1025.
  8. WANG T, TSENG K, ZHAO J, et al. Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies. Applied Energy, 134 (2014), pp. 229-238.
  9. GRECO A, CAO D, JIANG X, et al. A theoretical and computational study of lithium-ion battery thermal management for electric vehicles using heat pipes. Journal of Power Sources, 257 (2014), pp. 344-355.
  10. RAO Z, HUO Y, LIU X. Experimental study of an OHP-cooled thermal management system for electric vehicle power battery. Experimental Thermal and Fluid Science, 57 (2014), pp. 20-26.
  11. [YE Y, SAW L H, SHI Y, et al. Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging. Applied Thermal Engineering, 86 (2015), pp. 281-291.
  12. [YE Y, SAW L H, SHI Y, et al. Effect of thermal contact resistances on fast charging of large format lithium ion batteries. Electrochimica Acta, 134 (2014), pp. 327-337.
  13. WANG Q, JIANG B, XUE Q, et al. Experimental investigation on EV battery cooling and heating by heat pipes. Applied Thermal Engineering, 88 (2015), pp. 54-60.
  14. YE Y, SHI Y, SAW L H, et al. Performance assessment and optimization of a heat pipe thermal management system for fast charging lithium ion battery packs. International Journal of Heat and Mass Transfer, 92 (2016), pp. 893-903.
  15. ZUO Z, FAGHRI A. A network thermodynamic analysis of the heat pipe. International Journal of Heat and Mass Transfer, 41 (1998), 11, pp. 1473-1484.
  16. CHI S. Heat pipe theory and practice: a sourcebook, John Wiley and Sons Inc., New York, USA, 1976.
  17. PRASHER R S. A simplified conduction based modeling scheme for design sensitivity study of thermal solution utilizing heat pipe and vapor chamber technology. Journal of Electronic Packaging, 125 (2003), 3, pp. 378-385.
  18. WEI X, SIKKA K. Modeling of vapor chamber as heat spreading devices, Proceedings, Proceedings of the Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, San Diego, California. USA, 2006. Vol. 2, pp. 231-238.
  19. LING Z, CHEN J, FANG X, et al. Experimental and numerical investigation of the application of phase change materials in a simulative power batteries thermal management system. Applied Energy, 121 (2014), pp. 104-113.
  20. LIANG J, GAN Y, LI Y. Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures. Energy Conversion and Management, 155 (2018), pp. 1-9.
  21. CELIK I, GHIA U, ROACHE P, et al. Procedure for estimation and reporting of uncertainty due to discretization in CFD applications. J Fluids Eng, 130 (2008), 7, pp. 078001.