THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Authors of this Paper

External Links

online first only

Analysis and use of building heating and thermal energy management system

ABSTRACT
To explore the role and influence of thermal energy management system on building heating , by building a thermal energy management system based on the Internet of things, the situation of heating system and building heating is analyzed, the heat utilization rate of building heating, the stability of heating temperature, the change of heating energy consumption are mainly studied, and the energy consumption of building and the comprehensive effect of thermal energy management system and residents' satisfaction are analyzed. The research results show that through the role of the Internet of things thermal energy management system, the heat utilization rate of heating buildings has increased from about 65% to about 80%, about 15%. The fluctuation of heating water temperature is reduced from 12°C before the system is adopted to 4°C, which improves significantly. The coal consumption per hour of heating system is reduced from 63kg/h to 50kg/h, and the coal saving is about 15%. This not only saves resources but also reduces environmental pollution. The heat management system based on the Internet of things has significantly improved the heating system and building heating. Through the application of thermal energy management system, not only the heat utilization rate is increased, but also the consumption of resources is reduced and the environment is protected. Meanwhile, it solves the problem of building heating and the maximization of efficiency in the operation of heating companies. The research on building heating and thermal energy management system has a positive effect on the follow-up research.
KEYWORDS
PAPER SUBMITTED: 2019-11-30
PAPER REVISED: 2020-01-15
PAPER ACCEPTED: 2020-01-27
PUBLISHED ONLINE: 2020-03-15
DOI REFERENCE: https://doi.org/10.2298/TSCI191130120Z
REFERENCES
  1. Vigneysh T, Kumarappan N. Autonomous operation and control of photovoltaic/solid oxide fuel cell/battery energy storage based microgrid using fuzzy logic controller. International journal of hydrogen energy, 41(2016), 3, pp.1877-1891.
  2. Jiang G, et al. Multiscale convolutional neural networks for fault diagnosis of wind turbine gearbox. IEEE Transactions on Industrial Electronics, 66(2018), 4, pp. 3196-3207.
  3. Ziaja A, et al. Fault detection in rolling element bearings using wavelet-based variance analysis and novelty detection. Journal of Vibration and Control, 22(2016), 2, pp.396-411.
  4. Shaofei Wu. Study and evaluation of clustering algorithm for solubility and thermodynamic data of glycerol derivatives, Thermal Science, 23(2019), 5, pp.2867-2875
  5. Güneralp B, et al. Global scenarios of urban density and its impacts on building energy use through 2050. Proceedings of the National Academy of Sciences, 114(2017), 34, pp.8945-8950.
  6. Sturzenegger D, et al. Model predictive climate control of a swiss office building: Implementation, results, and cost-benefit analysis. IEEE Transactions on Control Systems Technology, 24(2015), 1, pp.1-12.
  7. Dodds P E, et al. Hydrogen and fuel cell technologies for heating: A review. International journal of hydrogen energy, 40(2015), 5, pp.2065-2083.
  8. Masy G, et al. Smart grid energy flexible buildings through the use of heat pumps and building thermal mass as energy storage in the Belgian context. Science and Technology for the Built Environment, 21(2015), 6, pp.800-811.
  9. Li M, et al. Response of energy consumption for building heating to climatic change and variability in Tianjin City, China. Meteorological Applications, 23(2016), 1, pp.123-131.
  10. Gupta N, Tiwari G N. Review of passive heating/cooling systems of buildings. Energy Science & Engineering, 4(2016), 5, pp.305-333.
  11. Tejero-González A, et al. Assessing the applicability of passive cooling and heating techniques through climate factors: An overview. Renewable and Sustainable Energy Reviews, 65(2016), pp.727-742.
  12. Tahmasebi F, Mahdavi A. The sensitivity of building performance simulation results to the choice of occupants' presence models: a case study. Journal of Building Performance Simulation, 10(2017), 5-6, pp.625-635.
  13. Verhaart J, et al. Personal heating: effectiveness and energy use. Building Research & Information, 43(2015), 3, pp.346-354.
  14. Liu Z, et al. Field measurement and evaluation of the passive and active solar heating systems for residential building based on the Qinghai-Tibetan Plateau case. Energies, 10(2017), 11, pp.1706.
  15. Wang P, Sipilä K. Energy-consumption and economic analysis of group and building substation systems—A case study of the reformation of the district heating system in China. Renewable energy, 87(2016), pp.1139-1147.
  16. Shaofei Wu,A Traffic Motion Object Extraction Algorithm,International Journal of Bifurcation and Chaos, 25(2015),14,Article Number 1540039
  17. Baik Y K, Moon J W. Development of Artificial Neural Network model for predicting the optimal setback application of the heating systems. KIEAE Journal, 16(2016), 3, pp.89-94.
  18. Magli S, et al. Analysis of the urban heat island effects on building energy consumption. International Journal of Energy and Environmental Engineering, 6(2015), 1, pp.91-99.