THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Authors of this Paper

External Links

online first only

Synthesis of MWCNT nanofluid by using two step method

ABSTRACT
The nanofluids, the fluid interruptions of nanomaterial, have presented lots of exciting properties and characteristic structures offer unique potential to the various applications. The article recaps the latest development of revision of nanofluids, for example the method of evaluation of strength of nanofluids, method of preparation and methods of enhance the stability of nanofluids. Finally, this paper finds the chances for future development of research work.
KEYWORDS
PAPER SUBMITTED: 2019-04-15
PAPER REVISED: 2019-05-15
PAPER ACCEPTED: 2019-06-01
PUBLISHED ONLINE: 2019-11-17
DOI REFERENCE: https://doi.org/10.2298/TSCI190414430S
REFERENCES
  1. Trisaksri., V., et al., Critical review of heat transfer characteristics of nanofluids, Renewable and Sustainable Energy Reviews 11 (2007), 3, pp. 512-523.
  2. Ozerinç., S., et al., Enhanced thermal conductivity of nanofluids: a state-of-the-art review, Microfluidics and Nanofluidics 8 (2010), 2, pp. 145-170.
  3. Wang., X. Q., et al., Heat transfer characteristics of nanofluids: a review, International Journal of Thermal Sciences 46 (2007),1, pp. 1-19.
  4. Kakaç., S., et al., Review of convective heat transfer enhancement with nanofluids, International Journal of Heat and Mass Transfer 52 (2009), 13-14, pp. 3187-3196.
  5. Rameshbabu., A.M., et al., Microstructure and Thermal Stability Analysis in a Double Phase Nanocrystalline Al20Mg20Ni20Cr20Ti20 High Entropy Alloy, Journal of Mechanical behavior and materials 26 (2017), pp.127-132.
  6. Godwin Antony., A., et al., Analysis of Wear Behaviour of Aluminium Composite With Silicon Carbide and Titanium Reinforcement, International Journal of Mechanical Engineering and Technology 9 (2018), pp. 681-691.
  7. Dinesh., S., et al., Experimental investigation and optimization of material removal rate and surface roughness in centerless grinding of magnesium alloy using grey relational analysis, Mechanics and Mechanical Engineering 21 (2017), pp. 17-28.
  8. Vivekanandan. M et. al, Pressure Vessel Design using PV-ELITE Software with Manual Calculations and Validation by FEM, Journal of Engineering Technology, 8 (2019),1, pp.425-433.
  9. Godwin AntonyGodwin Antony.A, .A, et al.et al.,,Analysis and optimization of performance parameters in computerizedAnalysis and optimization of performance parameters in computerized I.C. engine using diesel blended with lI.C. engine using diesel blended with linseed oil and leishmaan's solution, inseed oil and leishmaan's solution, Mech. Mech. Eng.Mech. Mech. Eng., , 21(2017), 2, pp. 19321(2017), 2, pp. 193--205.205.
  10. Avudaiappan.T, .T, et al.et al., , Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding, J. of Applied Fluid Mechanics, 11 (2018)(2018), Special Issue, pp. 129 -134.
  11. Vijayan., V., et al., Heat Transfer Enhancement in Mini Compact Heat Exchanger by using Alumina Nanofluid , International, Journal of Mechanical Engineering and Technology 10, (2019), 01, pp. 564-570.
  12. Pradeep Mohan Kumar.K., et al., Computational Analysis and Optimization of Spiral Plate Heat Exchanger, J. of Applied Fluid Mechanics, Volume 11 (2018), Special Issue, pp.no, 121-128.
  13. Arulprakasajothi., et al., Experimental investigation on heat transfer effect of conical strip inserts in a circular tube under laminar flow, Frontiers in Energy, 10 (2015), 2, pp. 136-142, doi:10.1007/s11708-015-0389.
  14. Baskar., S., et al., Theoretical study and performance of vapour refrigeration system along with additive of ZrO2, International Journal of Management, Technology and Engineering 8 (2018), 12, pp. 4811-4817.
  15. Baskar., S., et al., Performance Study and Characteristic on a Domestic Refrigeration System with Additive of Zirconium Oxide (ZrO2) Nano-Particle as Nano-Lubricant, International Journal for Research in Applied Science & Engineering Technology (IJRASET) 5 (2017), 10, pp. 1-10.
  16. Baskar., S., et al., Heat transfer characteristics of acetone/water mixture in a tubular heat exchanger with turbulator, International Conference on Advanced Nano-materials and Emerging Engineering Technologies (2013), pp.627 - 630.
  17. Jacob., S., et al., Performance Analysis of Automobile Radiator Using NanoFluid and Water Mixture as Coolant, International Journal of Modern Trends in Engineering and Research 5 (2018), 03, pp. 1-4.