THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

online first only

Analysis of infrared temperature measurement for flue gas shielding metal surface using Source Multi-Flux method

ABSTRACT
The infrared temperature measurement technique has been applied in various fields with the development of Charge Coupled Device (CCD). In the problem of metal surface temperature measurement, if the surface is covered by participating media, the traditional infrared temperature measurement technique will lead to intolerable measurement errors. In this work, the infrared temperature measurement problem was solved by the Source Multi-Flux method. On this base, the impact of the flue gas thickness and surface temperature on the apparent temperature measured by the CCD was analyzed. Furthermore, the corresponding experimental system was set up. And the experimental results were found to have a good agreement with the simulated results. Finally, the idea of modification for the infrared temperature measurement by inverse method was proposed.
KEYWORDS
PAPER SUBMITTED: 2015-09-04
PAPER REVISED: 2016-03-06
PAPER ACCEPTED: 2016-03-11
PUBLISHED ONLINE: 2016-04-09
DOI REFERENCE: https://doi.org/10.2298/TSCI150904067W
REFERENCES
  1. Yin, C., Caillat, S., Harion, J. L., et al. Investigation of the Flow, Combustion, Heat-Transfer and Emissions from A 609mw Utility Tangentially Fired Pulverized-Coal Boiler, Fuel, 81(2002), 6, pp. 997-1006
  2. Ehyaei, M. A.. Estimation of Condensate Mass Flow Rate During Purging Time in Heat Recovery Steam Generator of Combined Cycle Power Plant, Thermal Science, 18(2014), 4, pp. 1389-1397
  3. AlWaaly, A. A. Y., Paul, M. C., Dobson, P. S.. Effects of Thermocouple Electrical Insulation on the Measurement of Surface Temperature, Applied Thermal Engineering, 89(2015), pp. 421-431
  4. Qi, H., He, Z. Z., Gong, S., et al. Inversion of Particle Size Distribution by Spectral Extinction Technique Using the Attractive and Repulsive Particle Swarm Optimization Algorithm, Thermal Science, 2014, DOI: 10.2298/TSCI140319103Q
  5. Childs, P. R. N., Greenwood, J. R., Long, C. A.. Review of Temperature Measurement. Review of Scientific Instruments, 71(2000), 8, pp. 2959-2978
  6. Švantner, M., Vacíková, P., Honner, M.. Non-Contact Charge Temperature Measurement on Industrial Continuous Furnaces and Steel Charge Emissivity Analysis, Infrared Physics & Technology, 61(2013), pp. 20-26
  7. Li, D. I., Wells, M. A.. Effect of Subsurface Thermocouple Installation on the Discrepancy of the Measured Thermal History and Predicted Surface Heat Flux During a Quench Operation, Metallurgical and Materials Transactions B, 36(2005), 3, pp. 343-354
  8. Dudas, J.. Characterization and Avoidance of In-Field Defects in Solid-State Image Sensors. Ph.D. thesis, Simon Fraser University, Burnaby, Canada, 2008
  9. Wang, F. Q., Shuai, Y., Tan, H. P., et al. Heat Transfer Analyses of Porous Media Receiver with Multi-Dish Collector by Coupling MCRT and FVM Method, Solar Energy, 93(2013), pp. 158-168
  10. Wang, F. Q., Shuai, Y., Tan, H. P., et al. Thermal Performance Analysis of Porous Media Receiver with Concentrated Solar Irradiation. International Journal of Heat and Mass Transfer, 62(2013), pp. 247-254
  11. Jones, T. E., Urquhart, M. E., Baddeley, C. J.. An Investigation of the Influence of Temperature on the Adsorption of the Chiral Modifier, (S)-Glutamic Acid, on Ni {111}, Surface Science, 587(2005), 1, pp. 69-77
  12. Liu, W., Jia, X., Jia, Z., et al. Fast Dimensional Measurement Method and Experiment of the Forgings Under High Temperature, Journal of Materials Processing Technology, 211(2011), 2, pp. 237-244
  13. Takeshi, M., Hiroaki, I., Yuuki, N., et al. Evaluation of Heat Transfer Characteristics of Textile Goods by Infrared Image Measurement Method. Journal of Textile Engineering, 52(2006), 1, pp. 37-41
  14. Tank, V., Dietl, H.. Multispectral Infrared Pyrometer for Temperature Measurement with Automatic Correction of the Influence of Emissivity, Infrared Physics, 30(1990), 4, pp. 331-342
  15. Li, Y., Sun, X., Wang, Y.. Research on the Technique of Accurately Measuring Temperature with Infrared Thermal Imagers, Proceedings, 9th IEEE International Conference on Electronic Measurement & Instruments, Beijing, China, 2009, Vol. 4, pp. 573-578
  16. Yang, Z., Zhang, S., Yang, L.. Calculation of Infrared Temperature Measurement on Non-Lambertian Objects, Spectroscopy and Spectral Analysis, 30(2010), 8, pp. 2093-2097
  17. Qi, H., Ruan, L. M., Wang, S. G., et al.A Modified Finite Volume Method for Simulating the Radiative Intensity in Any Specified Direction. Proceedings, 7th International Symposium on Heat Transfer, Beijing, China, 2008.
  18. Huang, Q.X., Yan, F. W. J., Chi, Y.. Theoretical Fast Non-Intrusive 3-D Temperature Distribution Measurement within Scattering Medium from Flame Emission Image Analysis, Optics Communications, 292(2013), pp. 25-30