THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

NUMERICAL STUDY ON THE INFLUENCE OF PLATEN SUPER-HEATER ON COMBUSTION CHARACTERISTICS IN A 600 MW TANGENTIALLY FIRED PULVERIZED-COAL BOILER

ABSTRACT
Numerical simulations have been conducted to study combustion characteristics of tangentially fired pulverized-coal boiler. A 600 MW tangentially coal-fired boiler was used for investigating the effect of platen super-heaters on the temperature, species distributions and heat transfer. Two furnace models were established, whose difference lies in modelling super-heaters or not. Results show that modelling platen super-heaters is conducive to precisely predict the temperature, species (CO, CO2, O2) and heat flux in the platen zone and has a weak influence on these data in zones below the platen. Modelling platen super-heaters has little influence on the NOx prediction. Platen super-heaters obviously decrease heat absorbed by water-wall nearby and affects heat distribution coefficient of furnace.
KEYWORDS
PAPER SUBMITTED: 2020-05-20
PAPER REVISED: 2020-06-26
PAPER ACCEPTED: 2020-07-09
PUBLISHED ONLINE: 2020-09-12
DOI REFERENCE: https://doi.org/10.2298/TSCI200520245C
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2021, VOLUME 25, ISSUE Issue 2, PAGES [833 - 843]
REFERENCES
  1. Zhou, Y., et al., Experimental and Numerical Study on the Flow Fields in upper Furnace for Large-Scale Tangentially Fired Boilers, Applied Thermal Engineering, 29 (2009), 4, pp. 732-739
  2. Zhang, J., et al., Optimization of Separated Overfire Air System for a Utility Boiler from a 3-MW Pilot- Scale Facility. Energy and Fuels, 27 (2013), 2, pp. 1131-1140
  3. Diez, L.I., et al., Numerical Investigation of NOx Emissions from a Tangentially-Fired Utility Boiler Under Conventional and Overfire Air Operation, Fuel, 87 (2008), 7, pp. 1259-1269
  4. Park, H. Y., et al., Reduction of Main Steam Temperature Deviation in a Tangentially Coal-Fired Two Pass Boiler, Fuel, 166 (2016), Feb., pp. 509-516
  5. Hashimoto, N., Watanabe, H., Numerical Analysis on Effect of Furnace Scale on Heat Transfer Mechanism of Coal Particles in Pulverized Coal Combustion Field, Fuel Processing Technology, 145 (2016), May, pp. 20-30
  6. Yin, C., et al., Investigation of the Flow, Combustion, Heat Transfer and Emissions from a 609 MW Utility Tangentially Fired Pulverized-Coal Boiler, Fuel, 81 (2002), 8, pp. 997-1006
  7. Yin, C., et al., Further Study of the Gas Temperature Deviation in Large-Scale Tangentially Coal-Fired Boilers, Fuel, 82 (2003), 9, pp. 1127-1137
  8. Park, H. Y., et al., Coupled Fluid Dynamics and Whole Plant Simulation of Coal Combustion in a Tangentially-Fired Boiler, Fuel, 89 (2010), 8, pp. 2001-2010
  9. Zhou, H., et al., Numerical Simulation of the NOx Emissions in a 1000 MW Tangentially Fired Pulverized-Coal Boiler: Influence of the Multi-Group Arrangement of the Separated over Fire Air, Energy and Fuels, 25 (2011), 5, pp. 2004-2012
  10. Zeng, L., et al., Numerical Simulation of Combustion Characteristics and NOx Emissions in a 300 MWe Utility Boiler with Different Outer Secondary-Air Vane Angles, Energy and Fuels, 24 (2010), 10, pp. 5349-5358
  11. Habib, M. A., et al., Thermal and Emission Characteristics in a Tangentially Fired Boiler Model Furnace, International Journal of Energy Research, 34 (2010), 13, pp. 1164-1182
  12. Chen, K., et al., Effect of Separated Over-Fire Air on Combustion Performance of a 3 MW Pilot-Scale Facility, Applied Thermal Engineering, 108 (2016), Sept., pp. 30-40
  13. Jones, J. M., et al., Modelling NOx Formation in Coal Particle Combustion at High Temperature: An Investigation of the Devolatilisation Kinetic Factors, Fuel, 78 (1999), 10, pp. 1171-1179
  14. Korytnyi, E., et al., Computational Fluid Dynamic Simulations of Coal-Fired Utility Boilers: An Engineering tool, Fuel, 88 (2009), 1, pp. 9-18
  15. Liu, H., et al., Effect of Two-Level over-Fire Air on the Combustion and No Emission Characteristics in a 600 MW Wall-Fired Boiler, Numerical Heat Transfer Part a-Applications, 68 (2015), 9, pp. 993-1009
  16. Zhang, X., et al., Numerical Investigation of Low NOx Combustion Strategies in Tangentially-Fired Coal Boilers, Fuel, 142 (2015), Feb., pp. 215-221
  17. Tian, D., et al., Influence of Vertical Burner Tilt Angle on the Gas Temperature Deviation in a 700 MW Low NOx Tangentially Fired Pulverised-Coal Boiler, Fuel Processing Technology, 138 (2015), Oct., pp. 616-628
  18. Haryanto, A., Hong, K.S., Modelling and Simulation of an Oxy-Fuel Combustion Boiler System with Flue Gas Re-Circulation, Computers and Chemical Engineering, 35 (2011), 1, pp. 25-40
  19. Guo, J., et al., Numerical Investigation on Oxy-Combustion Characteristics of a 200 MWe Tangentially Fired Boiler, Fuel, 140 (2015), Jan., pp. 660-668
  20. Liu, H., et al., Modelling the Occurrence and Methods of Eeducing Thermal Deviations of upper Furnace Heating Surfaces in a 1000 MW Dual Circle Tangential Firing Single Furnace Ultra-Supercritical Boiler, Numerical Heat Transfer Part a-Applications, 66 (2014), 7, pp. 816-838

© 2021 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence