THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

THERMO ELASTIC-PLASTIC TRANSITION IN A THIN ROTATING DISC WITH INCLUSION

ABSTRACT
Stresses for the elastic-plastic transition and fully plastic state have been derived for a thin rotating disc with shaft at different temperatures and results have been discussed and depicted graphically. It has been observed that the rotating disc with inclusion and made of compressible material requires lesser angular speed to yield at the internal surface and higher percentage increase in angular speed to become fully plastic as compare to disc made of incompressible material. With the introduction of thermal effect the rotating disc with inclusion required lesser angular speed to yield at the internal surface. Rotating disc made of compressible material with inclusion requires higher percentage increase in angular speed to become fully-plastic as compare to disc made of incompressible material. Thermal effect also increases the values of radial and circumferential stresses at the internal surface for fully-plastic state. .
KEYWORDS
PAPER SUBMITTED: 2006-04-14
PAPER REVISED: 2006-12-12
PAPER ACCEPTED: 2006-12-20
DOI REFERENCE: https://doi.org/10.2298/TSCI0701103G
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2007, VOLUME 11, ISSUE Issue 1, PAGES [103 - 118]
REFERENCES
  1. Timoshenko, S. P. & Goodier, J. N. Theory of Elasticity, McGraw - Hill, New York,(1951)
  2. Chakrabarty, J. Theory of Plasticity, McGraw-Hill, New York,(1987).
  3. Heyman, J. Plastic Design of Rotating Discs Proc. Inst. Mech. Engrs., 172 (1958):531- 546.
  4. Gupta, S.K. & Shukla, R.K. Elastic - Plastic Transition in a Thin Rotating disc, Ganita, 45 (1994):78-85.
  5. Seth, B. R. Transition Theory of Elastic - Plastic Deformation, Creep and Relaxation, Nature, 195 (1962):896-897.
  6. Seth, B. R. Measure Concept in Mechanics, Int. J. Non-linear Mech. ,I(2) (1966):35-40.
  7. Seth, B.R. Creep Transition. J. Math. Phys. Sci. 8(1972).
  8. Seth, B.R. Elastic-plastic transition in shells and tubes under pressure. ZAMM 43 (1963):345.
  9. S. Hulsurkar, Transition theory of creep shell under uniform pressure, ZAMM 46 (1966):431-437
  10. Gupta, S. K. ,Dharmani, R.L and Rana V.D. "Creep Transition in torsion, Int. J. Non-linear Mechanics 13(1979):303-309.
  11. Gupta, S. K. and Dharmani, R. L Creep Transition in Bending of Rectangular Plates , Int. J. nonlinear Mech.,15 (1980):147-154.
  12. Gupta, S.K. and Dharmani, R.L Creep Transition in thick walled cylinder under internal pressure, ZAMM 59 (1979):517:521.
  13. Gupta , S.K. and Rana, V.D. Thermo Elastic-plastic and Creep Transition in Rotating Cylinders, J. Math. Phys. Sci.,23 (1989):71-90.
  14. Gupta, S.K. and Sharma, Sanjeev Proc. Third international Congress on Thermal Stresses, Cracow, Poland, June 13-17(1999):345-348.
  15. Gupta, S.K. and Pankaj, Elastic-Plastic Transition in a thin rotating Disc with Inclusion send to the Indian Journal of Pure and Appl. Mathematics(Nov.-2005) (under publication).
  16. Gupta S.K. Thermo Elastic-plastic Transition of Thick-walled Rotating Cylinder, Proc. 1st Int. Symp. on Thermal Stresses and Related Topics, June 5-7 (1995), Japan.
  17. Parkus, H. Thermo-Elasticity, Springer-Verlag Wien, New York (1976) .
  18. Levitsky, M. & Shaffer B. W. (1975) Residual Thermal Stresses in a Solid Sphere form a Thermosetting Material, Jr. of Appl. Mech., Trans. of ASME, 42(3):651-655

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence