ABSTRACT
This study offers a comparative analysis of two most important types of thermoresponsive hydrogels: poly(N-isopropylacrylamide) (PNiPAM) and poly(alkylene glycol) methacrylates (PAGMA). The latter includes poly(oligo(ethylene glycol) methacrylate) (POEGMA), a moderately hydrophilic polymer, and poly(oligo(propylene glycol) methacrylate) (POPGMA), its more hydrophobic counterpart. The hydrogels were produced using gamma irradiation in three different solvent systems: demineralized water, a water/ethanol mixture, and pure ethanol. Gel fraction measurements were used to assess the effects of monomer type, irradiation dose, and solvent composition on crosslinking efficiency. Swelling behavior was examined over a wide temperature range, highlighting distinct thermoresponsive features and volume phase transition temperatures (VPTTs). Differential scanning calorimetry (DSC) confirmed the presence of temperature-dependent phase transitions, while structural and chemical changes caused by radiation-induced crosslinking were analyzed using Fourier-transform infrared (FTIR) spectroscopy. Results showed that effective hydrogel formation is achievable at relatively low radiation doses. The choice of synthesis medium significantly influenced the formation and the gelation efficiency of hydrogels. Particularly, PNiPAM hydrogels were successfully synthesized without the use of alcohol and still demonstrated excellent swelling capacity and VPTTs near physiological temperatures, making them suitable for biomedical applications. These findings provide valuable insights for designing advanced smart hydrogels for biomedical and environmental uses.
KEYWORDS
PAPER SUBMITTED: 2025-08-15
PAPER REVISED: 2025-09-15
PAPER ACCEPTED: 2025-09-17
PUBLISHED ONLINE: 2025-09-21
- Narayana, S., et al., Smart poly (N-isopropylacrylamide)-based hydrogels: a tour D'horizon of biomedical applications, Gels, 11 (2025), 3, pp. 207
- Singh, A., et al., Poly(oligo(ethylene glycol) methacrylate)-based polymers in biomedical applications: Preparation and applications, Biomacromolecules, 26 (2025), 7, pp. 3929-3973
- Rogic Miladinovic, Z., et al., Swelling behavior, biocompatibility, and controlled delivery of sodium-diclofenac in new temperature-responsive P(OEGMA/OPGMA) copolymeric hydrogels, Gels, 11 (2025), 3, pp. 201
- Miladinovic, Z. R., et al., Temperature/pH dual responsive OPGMA based copolymeric hydrogels prepared by gamma radiation: an optimisation study, Journal of Polymer Research, 23 (2016), 4, pp. 77
- Suljovrujic, E., et al., Swelling properties and drug release of new biocompatible POEGOPGMA hydrogels with VPTT near to the human body temperature, Polymer Bulletin, 78 (2021), 5, pp. 2405-2425
- Stolic, A., et al., Radiation-induced synthesis of polymer networks based on thermoresponsive ethylene glycol propylene glycol monomers, Gels, 11 (2025), 7, pp. 488
- Yang, Q., et al., Analysis of pre-existing IgG and IgM antibodies against polyethylene glycol (PEG) in the general population, Analytical Chemistry, 88 (2016), 23, pp. 11804-11812
- Ciarleglio, G., et al., Conductive and thermo-responsive composite hydrogels with poly (Nisopropylacrylamide) and carbon nanotubes fabricated by two-step photopolymerization, Polymers, 15 (2023), 4, pp. 1022
- Yang, J., et al., Recent advances in smart hydrogels prepared by ionizing radiation technology for biomedical applications, Polymers, 14 (2022), 20, pp. 4377
- de Oliveira, M. J. A., et al., Influence of gamma radiation on Amphotericin B incorporated in PVP hydrogel as an alternative treatment for cutaneous leishmaniosis, Acta Tropica, 215 (2021), pp. 105805
- Bhuyan, M. M.; Jeong, J.-H., Synthesis and characterization of gamma radiation induced diallyldimethylammonium chloride-acrylic acid-(3-acrylamidopropyl) trimethylammonium chloride superabsorbent hydrogel, Gels, 9 (2023), 2, pp. 159
- Krstic, M., et al., Stimuli-responsive copolymeric hydrogels based on oligo (ethylene glycol) dimethacrylate for biomedical applications: An optimisation study of pH and thermoresponsive behaviour, Reactive and Functional Polymers, 170 (2022), pp. 105140
- Bhuyan, M. M., et al., Synthesis of potato starch‐acrylic‐acid hydrogels by gamma radiation and their application in dye adsorption, International Journal of Polymer Science, 2016 (2016), 1, pp. 9867859
- Galante, R., et al., Sterilization of hydrogels for biomedical applications: A review, Journal of Biomedical Materials Research Part B, 106 (2018), 6, pp. 2472-2492
- Huaman, M. A. L., et al., Synthesis and swelling behaviors of poly (2-hydroxyethyl methacrylateco- itaconic acid) and poly (2-hydroxyethyl methacrylate-co-sodium itaconate) hydrogels as potential drug carriers, Results in Chemistry, 5 (2023), pp. 100917
- Mukherji, D.; Kremer, K., Smart polymers for soft materials: From solution processing to organic solids, Polymers, 15 (2023), 15, pp. 3229
- Bharadwaj, S., et al., Cononsolvency of thermoresponsive polymers: where we are now and where we are going, Soft Matter, 18 (2022), 15, pp. 2884-2909
- Säckel, C., et al., 2H and 17O NMR studies of solvent dynamics related to the cononsolvency of poly(N-isopropyl acrylamide) in ethanol-water mixtures, Soft Matter, 21 (2025), 14, pp. 2738-
- Nakamura, K., et al., Solution properties of amphiphilic alternating copolymers of N‑ethylmaleimide and 2‑hydroxyethyl vinyl ether: Thermoresponsiveness in alcohols and cosolvency phenomenon in binary ethanol/water solutions, Macromolecules, 57 (2024), pp. 4439-
- Manek, E., et al., Search for the origin of discrepancies in osmotic measurements of the PNIPAM-water system, Periodica Polytechnica Chemical Engineering, 61 (2017), 1, pp. 39
- Radecki, M., et al., Temperature-induced phase transition in hydrogels of interpenetrating networks of poly (N-isopropylacrylamide) and polyacrylamide, European Polymer Journal, 68 (2015), pp. 68-79
- Czakkel, O., et al., Effect of graphene-derivatives on the responsivity of PNIPAM-based thermosensitive nanocomposites-A review, European Polymer Journal, 116 (2019), pp. 106-116
- Ghanbari, E., et al., Analysis of differential scanning calorimetry (DSC): determining the transition temperatures, and enthalpy and heat capacity changes in multicomponent systems by analytical model fitting, Journal of Thermal Analysis and Calorimetry, 148 (2023), 22, pp. 12393-
- Bäckström, S., et al., Tailoring properties of biocompatible PEG-DMA hydrogels with UV light, Materials Sciences and Applications, 3 (2012), pp. 425-431
- Urošević, M. Z., et al., Synthesis and characterization of poly (N-isopropylmethacrylamide-co-Nisopropylacrylamide) copolymers, Hemijska industrija, 74 (2020), 2, pp. 103-117
- Kurečič, M., et al., Uv polymerization of poly (N-isopropylacrylamide) hydrogel, Materials and Technologies, 46 (2012), 1, pp. 87-91