THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Yizhuo Meng

,

Qimeng Duan

,

Danghua Zhao

,

Chenxi Hou

online first only

Analysis of steady-state operation of high temperature heat pipe and optimization of the working medium

ABSTRACT
High temperature heat pipes exhibit excellent heat transfer performance and can operate stably under high temperature conditions above 750K. They are widely used in heat recovery and heat removal processes. In this paper, a flow and heat transfer model is established to calculate the temperature, pressure, and velocity distribution of the high temperature heat pipe, and the results are similar to the experimental data. In addition, the working medium of the high temperature heat pipe is optimized through a novel optimization method based on probability, and it is concluded that sodium has better heat transfer performance than lithium and potassium under 800K-1000K operating conditions. The optimal result is consistent with the simulation result, which provides a reference for the optimization of working medium in high temperature heat pipes under other operating conditions.
KEYWORDS
high temperature heat pipe, heat transfer optimization，flow and heat transfer
PAPER SUBMITTED: 2024-04-30
PAPER REVISED: 2024-08-26
PAPER ACCEPTED: 2024-09-04
PUBLISHED ONLINE: 2024-10-12
DOI REFERENCE: https://doi.org/10.2298/TSCI240430215M
REFERENCES
  1. Faghri, A., et al., Transient Lumped Heat-Pipe Analyses, Heat Recovery Systems & CHP, 14(1999),4, pp. 351-363
  2. Zuo, Z. J., Faghri, A., A Network Thermodynamic Analysis of the Heat Pipe. International Journal of Heat and Mass Transfer, 41(1998), 11, pp. 1473-1484
  3. Tian, Z, X., et al., Study on Heat Transfer Performance of High Temperature Potassium Heat Pipe at Steady State, Atomic Energy Science and Technology, 54(2020), 10, pp. 1771-1778
  4. Tian, Z, X., et al., A Review of Liquid Metal High Temperature Heat Pipes: Theoretical Model, Design, and Application, International Journal of Heat and Mass Transfer, 214(2023), 0, pp.124434
  5. Tian, Z, X., et al., Code Development and Analysis on the Operation of Liquid Metal High Temperature Heat Pipes under Full Condition, Annals of Nuclear Energy, 160(2021), 0, pp.108396
  6. Panda, K. K., et al., Numerical Simulation of High Temperature Sodium Heat Pipe for Passive Heat Removal in Nuclear Reactors, Nuclear Engineering and Design, 323(2017), 1, pp.376-385
  7. Wang, C. L., et al., Study on the Characteristics of the Sodium Heat Pipe in Passive Residual Heat Removal System of Molten Salt Reactor (Article), Nuclear Engineering and Design, 265(2013), 0, pp. 691-700
  8. Han, Y., et al., Numerical simulation of potassium heat pipe based on porous media model, Atomic Energy Science and Technology, 48(2014), 1, pp.49-53
  9. Zhang, H., et al., Re Guan Jie Neng Ji Shu (Energy Saving Technology for Heat Pipes, Chinese). Chemical Industry Press, Beijing, China, 2009
  10. Bowman, W. J., Hitchcock, J. E., Transient compressible heat-pipe vapor dynamics, Proceedings, Proceedings of the 25th ASME National Heat Transfer Conference. New York, USA, 1988, pp. 329-337
  11. Jiao, G. H., et al., Flow Heat Transfer and Mechanical Characteristics of High Temperature Heat Pipe Based on Multi-physics Coupling, Annals of Nuclear Energy, 58(2024),1, pp. 60-68
  12. Shen, W. D., et al., Gong Cheng Re Li Xue (Engineering Thermodynamics, Chinese), Higher Education Press, Beijing, China, 2016
  13. Faghri, A., et al., Heat Pipe Science and Technology, Taylor & Francis, Oxford, UK, 1995
  14. Chi, S. W., et al., Heat Pipe Theory and Practice: A Sourcebook, Hemisphere Pub Corp, Washington, USA, 1976
  15. Liu, W., et al., Duo Kong Jie Zhi Chuan Re Chuan Zhi Li Lun Yu Ying Yong (Theory and Application of Heat and Mass Transfer in Porous Media, Chinese), Science Press, Beijing, China, 2006
  16. Schrage, R. W., et al., A Theoretical Study of Interface Mass Transfer, Columbia University Press, New York, USA, 1953
  17. Tao W. Q., et al., Shu Zhi Chuan Re Xue (Numerical Heat Transfer, Chinese), Xi'an Jiaotong University Press, Xi'an, China, 2001
  18. Lee, B. I., Lee, S. H., Manufacturing and Temperature Measurements of a Sodium Heat Pipe, KSME International Journal, 15(2001), 11, pp. 1533-1540
  19. Qian, Z. Y. Di Rong Dian Jin Shu De Re Wu Xing (Thermophysical Properties of Low Melting Point Metals, Chinese), Science Press, Beijing, China, 1985
  20. Zheng, M. S., et al., Probability-Based Multi-objective Optimization for Material Selection, Springer Nature Singapore, 2024
  21. Hicks, W. T., Evaluation of Vapor & hyphen; Pressure Data for Mercury, Lithium, Sodium, and Potassium, Journal of Chemical Physics, 38(1963), 8, pp: 1873-1880
  22. Zhang, Z. Q., et al., Numerical Investigation on Startup Characteristics of High Temperature Heat Pipe for Nuclear Reactor, Nuclear Engineering and Design, 378(2021), 0, pp.111180
PDF VERSION [DOWNLOAD]
Analysis of steady-state operation of high temperature heat pipe and optimization of the working medium